The concept of a household low-speed kinetic energy storage

• Autorzy: Janas Sebastian

Identyfikatory

DOI

10.32056/KOMAG2023.1.4

• Języki publikacji: EN

Abstrakty

EN

This paper presents a concept of mechanical design, for a slow-speed kinetic energy storage device. It is an attempt to present the problem of using the device to cooperate with small-scale household RES. Calculations allowing for selection of rotating mass along with determination of effective revolutions of the rotating mass are presented. The 3D model gives an overview of the main structural nodes of the device in the mechanical part. Due to large axial load resulting from the mass of the rotor and other components and subassemblies, a simple FEM simulation of the structure base was performed. Preliminary calculations of the magnetic bearing, acting as an axial bearing, were also carried out.

Słowa kluczowe

EN

kinetic energy storage; household RES; renewable energy; just transition

PL

energia; magazynowanie; symulacja FEM

• Wydawca: Instytut Techniki Górniczej KOMAG
• Czasopismo: Mining Machines
• Rocznik: 2023
• Tom: vol. 41, iss. 1
• Strony: 37--47
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Janas Sebastian

• KOMAG Institute of Mining Technology, Pszczyńska 37, 44-101 Gliwice, Polska

Bibliografia

• [1] Volvo Cars. Volvo Cars Tests of Flywheel Technology Confirm Fuel Savings of Up to 25 Percent. 2013. https://www.media.volvocars.com/global/en-gb/media/pressreleases/48800 [accessed: 28.09.2022]
• [2] https://www.car-engineer.com/flywheel-technology-tested-on-volvo-s60-shows-important-fuel-savings/ [accessed: 28.09.2022]
• [3] https://www.railwayage.com/passenger/rapid-transit/la-metro-vycon-wess-system-saving-energy/ (dostęp 21 października 2021).
• [4] https://mttechnology.pl/ [accessed: 28.09.2022]
• [5] Olabi A., Wilberforce T., Abdelkareem M., Ramadan M. Critical Review of Flywheel Energy Storage System. Energies 2021, 14, 2159, str. 29-33. DOI: 10.3390/en-14082159.
• [6] Östergard R. Flywheel energy storage a conceptual study. Uppsala Universitet 2011.
• [7] Ertz G., Twiefel J., Krack M. Feasibility Study for Small Scaling Flywheel-Energy-Storage Systems in Energy Harvesting Systems. Energy Harvesting and Systems 2014 1(3-4): ss. 233–241. DOI: 10.1515/ehs- 2013-0010
• [8] Hedlund M., Lundin J., Santiago J., Abrahamsson J., Bernhoff H. Flywheel Energy Storage for Automotive Applications. Energies 2015, 8, str. 10636-10663. DOI: 10.3390/en-81010636
• [9] Khandoker H., Hawkins S. C., Ibrahim R., Huynh C. P., Deng F., Tensile strength of spinnable multiwall carbon nanotubes. Science Direct. Engineering Procedia 10 (2011) 2572-2578 DOI: 10.1016/j.proeng.2011.04.424

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu „Społeczna odpowiedzialność nauki” - moduł: Popularyzacja nauki i promocja sportu (2022-2023)