PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Optimum selection of the opening roller and navel for rotor spun silk/cashmere blended yarn

Autorzy
Identyfikatory
Warianty tytułu
PL
Optymalna selekcja wałka rozluźniającego i otworu odprowadzającego przędzę dla przędzenia rotorowego mieszanek jedwab/kaszmir
Języki publikacji
EN
Abstrakty
EN
Machine part selection in rotor spinning from possible alternatives with different properties and performance levels in terms of yarn quality is a difficult task. Classical statistical methods have been used to solve the problem, but the priorities and preferences to obtain the end product characteristics desired have not been taken into consideration. The best type of opening roller and navel depends on the type of fibre and yarn. This paper studies rotor spinning blended yarn produced from spun silk and cashmere. Nine samples were spun from three different opening rollers and navels. According to the Uster test results of yarn quality properties, optimum selection was achieved using the multi-objective fuzzy optimal model. A pin type roller and spiral grooved ceramic were the best choice for spinning stability and yarn quality properties.
PL
Przy przędzeniu rotorowym selekcja części przędzarki spośród różnych alternatyw oraz dla różnych wydajności i jakości przędzy jest zagadnieniem trudnym. Dla rozwiązania tego problemu stosowano klasyczne metody statystyczne, ale na ogół nie brano pod uwagę priorytetów i preferencji dla uzyskania pożądanych rezultatów. Najlepszy typ rolki rozluźniającej i otworu odprowadzającego przędzę zależy od rodzaju przędzionych włókien i przędzy. W artykule omówiono przędzenie przędz mieszankowych jedwab/kaszmir. Przędziono dziewięć próbek stosując trzy rolki rozluźniające i otwory odprowadzające. Na podstawie pomiarów przeprowadzonych za pomocą aparatu Ustera i uzyskanych wyników przeprowadzono optymalizacje stosując wieloparametrową analizę funkcji rozmytych. Wytypowano najlepsze podzespoły dla uzyskania maksymalnej jakości i stabilności procesu przędzenia.
Rocznik
Strony
35--38
Opis fizyczny
Bibliogr. 11 poz., rys., tab.
Twórcy
autor
  • College of Textiles, Donghua University, Shanghai 200051, China
autor
  • College of Textiles, Donghua University, Shanghai 200051, China
  • The Key Lab of Textile Science & Technology, Ministry of Education, Shanghai 200051, China
Bibliografia
  • 1. Nawaz Sh. M., et al.; How does open-end processing variables effect imperfections for different yarn count? Pakistan Textile Journal, March, 2003.
  • 2. Kaplan S., Goktepe O., Investigation into navel selection for rotor spinning machine using cotton waste, Fibres & Textiles in Eastern Europe , Vol. 14, No 3(57), 2006, pp. 58-62.
  • 3. Kaplan S., Araz C., Goktepe O.; A multicriteria decision aid approach on navel selection problem for rotor spinning, Textile Res. J. Vol. 76(12) 2006, pp. 896-904.
  • 4. Klein W.; New spinning systems. Short staple spinning series, Volume5,The textile Institute, Manual of textile technology, England 1993 p. 42-44.
  • 5. Palamutcu S., Kadoglu H.; Effect of processing on the twist of 100% polyester OE rotor yarns, Fibres &Textiles in Eastern Europe 2008, Vol. 16, No.4(69) pp.24-28.
  • 6. Wang S., Yu X.; Textile yarns, Shanghai, Novembre, 2006.
  • 7. Simpson J., Patureau A. M.; Effect of rotor speed on open-end spinning and yarn properties, Textile Res. J, 1979 pp. 468-473.
  • 8. Vigo J. P., Barella A.; Influence of opening roller type on properties of open-end polyester-viscose yarns, Text. Res. J. 1981, pp. 34-39.
  • 9. Watkins P., Buxton A.; Luxury Fibres: Rare Materials for Higher Added Value, Economist Intelligence Unit, New York - 1992, pp. 6-81, pp. 91-95, pp. 177-184.
  • 10. Franck R.; Silk, Mohair, Cashmere, and Other Luxury Fibres, Woodhead Publishing Limited and the Textile Institute, England, Cambridge (2001) pp. 69, 146.
  • 11. Kangs A., Kangas J., Kurttila M.; Voting methods, Managing forest ecosystems, decision support for forest management; Springer Netherlands, 2008.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-5c811798-b1ba-4e22-ae98-a0f4f5afc998
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.