Al-Pillared-Montmorillonite (AlPMt)/Poly(Methyl Methacrylate)(PMMA) Nanocomposites: The Effects of Solvent Types and Synthesis Methods

Kizilduman, B. K.; Alkan, M.; Doğan, M.; Turhan, Y.

doi:10.1515/adms-2017-0012

Artykuł - szczegóły

Tytuł artykułu

Al-Pillared-Montmorillonite (AlPMt)/Poly(Methyl Methacrylate)(PMMA) Nanocomposites: The Effects of Solvent Types and Synthesis Methods

Autorzy

Kizilduman B. K. , Alkan M. , Doğan M. , Turhan Y.

Wybrane pełne teksty z tego czasopisma

http://content.sciendo.com/view/journals/adms/adms-overview.xml

Identyfikatory

DOI

10.1515/adms-2017-0012

Warianty tytułu

Języki publikacji

Abstrakty

Al-pillared-montmorillonite (AlPMt)/poly(methyl methacrylate)(PMMA) nanocomposites were synthesized via melt blending method (MBM) and solution blending method (SBM). FTIR-ATR spectroscopy proved the interaction of AlPMt with PMMA polymer matrix. The thermogravimetric and differential scanning calorimeter analyses showed that the thermal stability and the glass transition temperature (Tg) of polymer matrix shifted to higher temperatures with increasing AlPMt content. Images showed that AlPMt dispersed at nanometer scale in polymer matrix. Contact angle measurements demonstrated that the hydrophilicity of the PMMA increased with incorporation of AlPMt. However, the thermal stability of clay/polymer nanocomposites (CPNs) was significantly changed with CPN preparation method.

Słowa kluczowe

Poly(methyl methacrylate) Al-pillared-montmorillonite nanocomposite thermal stability

nanokompozyt stabilność termiczna Poly(methyl methacrylate) Al-pillared-montmorillonite

Wydawca

Politechnika Gdańska

Czasopismo

Advances in Materials Science

Rocznik

2017

Tom

Vol. 17, nr 3(53)

Strony

5--23

Opis fizyczny

Bibliogr. 42 poz., rys., wykr., tab.

Twórcy

autor

Kizilduman B. K.

Balikesir University Faculty of Science and Literature Department of Chemistry 10145, Cagis-Balikesir, Turkey

autor

Alkan M.

Paşaalanı Mahallesi Karesi-Balıkesir, Turkey

autor

Doğan M.

mdogan@balikesir.edu.tr

Balikesir University Faculty of Science and Literature Department of Chemistry 10145, Cagis-Balikesir, Turkey

autor

Turhan Y.

Balikesir University Faculty of Science and Literature Department of Chemistry 10145, Cagis-Balikesir, Turkey

Bibliografia

1. Olad A., Polymer/Clay Nanocomposites. Advances in Diverse Industrial Applications of Nanocomposites. 2011, 114.
2. Ge Z., Li D., Pinnavaia T.J., Preparation of alumina-pillared montmorillonites with high thermal stability, regular microporosity and Lewis/Brönsted acidity. Microporous Mater. 1994, 3, 165.
3. Tsai T.Y., Lin M. J., Chang C. W., Li C.C., Morphology and properties of poly(methyl methacrylate)/clay nanocomposites by in-situ solution polymerization. J. Phys. Chem. Solids. 2010, 71, 590.
4. Valandro S.R., Lombardo P.C., Poli A.L., Horn M.A., Neumann M.G., Cavalheiro C.C., Thermal properties of poly (methyl methacrylate)/organomodified montmorillonite nanocomposites obtained by in situ photopolymerization. Mater. Res. 2014, 17, 265.
5. Zhang J., Gupta R.K., Wilkie C.A., Controlled silylation of montmorillonite and its polyethylene nanocomposites. Polymer. 2006, 47, 4537.
6. Nguyen QT., Baird D.G., Preparation of polymer–clay nanocomposites and their properties. Adv. Polym. Tech. 2006, 25, 270.
7. Xu H., Tong F., Yu J., Wen L., Zhang J., He J., A one-pot method to prepare transparent poly(methyl methacrylate)/montmorillonite nanocomposites using imidazolium-based ionic liquids. Polymer International. 2012, 61, 1382.
8. Choudhury A., Bhowmick, A.K., Ong C., Novel role of polymer-solvent and clay-solvent interaction parameters on the thermal, mechanical and optical properties of polymer nanocomposites. Polymer. 2009, 50, 201.
9. Messersmith P.B., Giannelis E.P., Polymer layered silicate nanocomposites: in situ intercalative polymerization of ε-caprolactone in layered silicates. Chem. Mater. 1993, 5, 1064.
10. Yano K., Usuki, A., Okada, A., Kurauchi T., Kamigaito O., Synthesis and properties of polyimide–clay hybrid. J. Polym. Sci., Part A: Polym. Chem. 1993, 31, 2493.
11. Giannelis E.P., Polymer layered silicate nanocomposites. Adv. Mater. 1996, 8, 29.
12. Gianni A.D., Amerio E., Monticelli O., Bongiovanni, R., Preparation of polymer/clay mineral nanocomposites via dispersion of silylated montmorillonite in a UV curable epoxy matrix. Appl. Clay Sci. 2008, 42, 116.
13. Alberti G., Constantino U., Layered solids and their intercalation chemistry. In Comprehensive Supramolecular Chemistry. 1996, 7, 1.
14. Schoonheydt R.A., Pinnavaia T., Lagaly G., Gangas N., Pillared clays and pillared layered solids. Pure Appl. Chem. 1999, 71, 2367.
15. Bhattacharyya K.G., Gupta S., Adsorption of a few heavy metals on natural and modified kaolinite and montmorillonite: A review. Adv. Colloid Interface Sci. 2008, 140, 114.
16. Burch R., Pillared Clays. Special Edition of Catal. Today; Elsevier: Amsterdam, 1988.
17. Gong F., Feng M., Zhao C., Zhang S., Yang M., Thermal properties of poly(vinyl chloride)/montmorillonite Nanocomposites. Polym. Degrad. Stab. 2004, 84, 289.
18. Modak S.K., Mandal A., Chakrabarty D., Studies on synthesis and characterization of poly(methyl methacrylate)-bentonite clay composite by emulsion polymerization and simultaneous in situ clay incorporation. Polym. Compos. 2013, 34, 32.
19. Huskic M., Zagar E., Zigon M., The influence of a quaternary ammonium salt and MMT on the in situ intercalative polymerization of PMMA. Eur. Polym. J. 2012, 48, 1555-1590.
20. Huskic M., Zigon M., PMMA/MMT nanocomposites prepared by one-step in situ intercalative solution polymerization. Eur. Polym. J. 2007, 43, 4891.
21. Turhan Y., Alp Z.G., Alkan M., Doğan M., Preparation and characterization of poly(vinylalcohol)/modified bentonite nanocomposites. Microporous Mesoporous Mater. 2013, 174,144.
22. Choi Y.Y., Lee S., Ryu S., Effect of silane functionalization of montmorillonite on epoxy/montmorillonite nanocomposite. Polym. Bull. 2009, 63, 47.
23. Sposito G., Prost R., Gaultier J.P., Infrared spectroscopic study of adsorbed water on reduced-charge Na/Li-montmorillonites. Clays Clay Miner. 1983, 31, 9.
24. Ma J., Xu J., Ren J. H., Yu Z., Mai Y., A new approach to polymer/montmorillonite nanocomposites. Polymer. 2003, 44, 4619.
25. Lindvig T., Michelsen, M.L., Kontogeorgis G.M., A Flory-Huggins model based on the Hansen solubility parameters. Fluid Phase Equilibr. 2002, 203, 247.
26. Burke J., Solubility Parameters: Theory and Application. Appeared in the AIC Book and Paper Group Annual; Ed C. Jensen, 1984.
27. Richards R.W., Dilute solution properties of poly(benzyl methacrylate. Polymer. 1977, 18, 114.
28. Kaya I., Ozdemir E., Thermodynamic interactions and characterisation of poly(isobornyl methacrylate) by inverse gas chromatography at various temperatures. Polymer. 1999, 40, 2405.
29. Bergaya F., Theng B.K., Lagaly G., Handbook of Clay Science; Elsevier Science: Amsterdam, 2006, 1-1246.
30. Cool P., Vansant E.F., Preperation, charecterization and applications of pillared clays. Mol. Sieves, 1998, 1, 14.
31. Toumi I., Benyoucef A., Yahiaoui A., Quijada C., Morallon E., Effect of the intercalated cation-exchanged on the properties of nanocomposites prepared by 2-aminobenzene sulfonic acid with aniline and montmorillonite. J. Alloys Compd. 2013, 551, 212.
32. Hedley C.B., Yuan G., Theng B.K., Thermal analysis of montmorillonites modified with quaternary phosphonium and ammonium surfactants. Appl. Clay Sci. 2007, 35, 180.
33. Bergaya F., Theng B.K., Lagaly G., Pillared clays and clay minerals. Handbook of Clay Science- Developments in Clay Science; Elsevier Science: Amsterdam, 2006.
34. Jalil M.E., Baschini M., Rodríguez-Castellónc E., Infantes-Molina A., Sapag K., Effect of the Al/clay ratio on the thiabendazol removal by aluminum pillared clays. Appl. Clay Sci. 2014, 87, 245.
35. Pielichowski K., Njuguna J., Thermal degradation of polymeric materials. Rapra Technology Limited Shawbury; United Kingdom, 2005.
36. Chen G.M., Liu S.H., Chen S.J., Qi Z., FTIR spectra, thermal properties and dispersibility of a polystyrene/montmorillonite nanocomposite. Macromol. Chem Phys. 2001, 202, 1189.
37. Zhu J., Start P., Mauritz K.A., Wilkie C.A., Thermal stability and flame retardancy of poly(methyl methacrylate)-clay nanocomposites. Polym. Degrad. Stab. 2002, 77, 253.
38. Nikolaidis A.K., Achilias D.S., Karayannidis G.P., Effect of the type of organic modifier on the polymerization kinetics and the properties of poly(methyl methacrylate)/organomodified montmorillonite nanocomposites. Eur. Polym. J. 2012, 48, 240.
39. Zanetti M., Camino G., Peichert P., Mulhaupt R., Thermal behaviour of poly(propylene) layered silicate nanocomposites. Macromol. Rapid Commun. 2001, 22, 176.
40. Achilias D.S., Siafaka P., Nikolaidis A.K., Polymerization kinetics and thermal properties of poly(alkyl methacrylate)/organomodified montmorillonite nanocomposites. Polym. Int. 2012, 61, 1510.
41. Koysuren O., Karaman M., Yıldız H.B., Koysuren H.N., Dinc H., Electrospun polyvinyl borate/poly(methyl methacrylate) (PVB/PMMA) blend nanofibers. Int. J. Polym. Mater. 2014, 63, 337.
42. Wu P.P., Zhao D.M., Li L.X., Wang H.S., Liu G.D., Preparation of blends of poly(methyl methacrylate) copolymers with high glass transition temperatures and low hydrophilicity. Polymer Engineering and Science. 2013, 2370.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-5bfe9c83-cab8-459a-a72f-5f409d1a23c8