Morphology and selected properties of cellulose acetate membranes for environmental applications

• Autorzy: Maryudi Maryudi , Hakika Dhias Cahya , Amillia Amillia

Identyfikatory

DOI

10.14314/polimery.2024.5.2

Warianty tytułu

PL

Struktura i wybrane właściwości membran z octanu celulozy do zastosowań środowiskowych

• Języki publikacji: EN

Abstrakty

EN

Microporous membranes were obtained by dry-wet phase inversion from a solution of cellulose acetate (CA) in acetone (13, 14 and 15 wt%). Polyethylene glycol was used as a blowing agent. The structure and mechanical properties were examined. FT-IR spectra show that the addition of polyethylene glycol improves the thermodynamics of the solution and increases the hydrophilicity of the membrane. The SEM method confirmed the microporous structure of membranes with an asymmetric structure and various pore sizes and porosities. Higher CA concentration resulted in better tensile properties.

PL

Mikroporowate membrany otrzymano metodą inwersji fazy sucho-mokrej z roztworu octanu celulozy (CA) w acetonie (13, 14 i 15% mas.). Jako środek porotwórczy zastosowano glikol polietylenowy. Zbadano strukturę i właściwości mechaniczne. Widma FT-IR pokazują, że dodatek glikolu polietylenowego poprawia termodynamikę roztworu i zwiększa hydrofilowość membrany. Metodą SEM potwierdzono m ikroporowatą strukturę membran o asymetrycznej budowie i różnej wielkości porów oraz porowatości. Większe stężenie CA skutkowało lepszymi właściwościami mechanicznymi przy rozciąganiu.

Słowa kluczowe

EN

biopolymers; cellulose acetate; membrane; phase inversion

PL

biopolimery; octan celulozy; membrany; inwersja faz

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2024
• Tom: Vol. 69, nr 5
• Strony: 292--299
• Opis fizyczny: Bibliogr. 31 poz., rys., tab., wykr.

Twórcy

autor

Maryudi Maryudi

• Graduate Program of Chemical Engineering, Faculty of Industrial Technology, Universitas Ahmad Dahlan, Jalan Jend. Ahmad Yani Banguntapan Bantul, Special Region of Yogyakarta, 55191 Indonesia

• https://orcid.org/0000-0001-5118-1479

autor

Hakika Dhias Cahya

• Graduate Program of Chemical Engineering, Faculty of Industrial Technology, Universitas Ahmad Dahlan, Jalan Jend. Ahmad Yani Banguntapan Bantul, Special Region of Yogyakarta, 55191 Indonesia

• https://orcid.org/0000-0002-7185-6805

autor

Amillia Amillia

• Graduate Program of Chemical Engineering, Faculty of Industrial Technology, Universitas Ahmad Dahlan, Jalan Jend. Ahmad Yani Banguntapan Bantul, Special Region of Yogyakarta, 55191 Indonesia

Bibliografia

• [1] Makwinja R., Mengistou S., Kaunda E. et al.: Heliyon 2022, 8(1), e08676. https://doi.org/10.1016/j.heliyon.2021.e08676
• [2] Ezugbe E.O., Rathilal S.: Membranes 2020, 10(5), 89. https://doi.org/10.3390/membranes10050089
• [3] Ahmed S.F., Mehejabin F., Momtahin A. et al.: Chemosphere 2022, 306, 135527. https://doi.org/10.1016/j.chemosphere.2022.135527
• [4] Bera S.P., Godhaniya M., Kothari C.: Journal of Basic Microbiology 2022, 62(3–4), 245. https://doi.org/10.1002/jobm.202100259
• [5] Vatanpour V., Pasaoglu M.E., Barzegar H. et al.: Chemosphere 2022, 295, 133914. https://doi.org/10.1016/j.chemosphere.2022.133914
• [6] Pendergast M.M., Hoek E.M.V.: Energy and Environmental Science 2011, 4(6), 1946. https://doi.org/10.1039/C0EE00541J
• [7] Idris A., Hew K.Y., Chan M.K.: Jurnal Teknologi 2012, 51, 67. https://doi.org/10.11113/jt.v51.147
• [8] Salahuddin Z., Farrukh S., Hussain A.: International Journal of Polymer Analysis and Characterization 2018, 23(5), 483. https://doi.org/10.1080/1023666X.2018.1485613
• [9] Bin Darwish N., Alalawi A., Alromaih H. et al.: Water Reuse 2023, 13(3), 492. https://doi.org/10.2166/wrd.2023.092
• [10] Vaulina E., Widyaningsih S., Kartika D. et al.: IOP Conference Series: Materials Science and Engineering 2018, 349, 012020. https://doi.org/10.1088/1757-899X/349/1/012020
• [11] Huang W., Wang Y., Chen C. et al.: Carbohydrate Polymers 2016, 143, 9. https://doi.org/10.1016/j.carbpol.2016.02.011
• [12] Souhoka F.A., Latupeirissa, J.: Indonesian Journal of Chemical Research 2018, 5(2), 58. https://doi.org/10.30598//ijcr.2018.5-fen
• [13] Umaningrum D., Astuti M.D., Nurmasari R. et al.: Indonesian Journal of Chemical Research 2021, 8(3), 129. https://doi.org/10.30598//ijcr.2021.7-dew
• [14] Moghadassi A.R., Bagheripour E., Hosseini S.M.: Journal of Applied Polymer Science 2017, 134(26). https://doi.org/10.1002/app.44993
• [15] Nyamiati R.D., Nurkhamidah S., Rahmawati Y. et al.: Eksergi 2023, 20(1), 8. https://doi.org/10.31315/e.v20i1.8820
• [16] Liu L., Xu Y., Liu J. et al.: Desalination and Water Treatment 2024, 317, 100309. https://doi.org/10.1016/j.dwt.2024.100309
• [17] Beverly S., Seal S., Hong S.: Journal of Vacuum Science& Technology A: Vacuum, Surfaces, and Films 2000, 18(4), 1107. https://doi.org/10.1116/1.582308
• [18] Morsy A., Mahmoud A.S., Soliman A.: Scientific Reports 2022, 12, 4386. https://doi.org/10.1038/s41598-022-08324-8
• [19] Smith B.: “Infrared Spectral Interpretation: A Systematic Approach”, CRC Press, Boca Raton 1998. https://doi.org/10.1201/9780203750841
• [20] Yunos M.Z., Harun Z., Basri H. et al.: Desalination 2014, 333(1), 36. https://doi.org/10.1016/j.desal.2013.11.019
• [21] Sobral M.C.C.M., Sobral A.J.F.N., Guthrie J.T. et al.: Journal of Materials Science: Materials in Medicine 2008, 19, 667. https://doi.org/10.1007/s10856-007-0168-4
• [22] Alvi M.A.U.R., Khalid M.W., Ahmad N.M. et al.: Advances in Polymer Technology 2019, 8074626. https://doi.org/10.1155/2019/8074626
• [23] Hołda A.K., Vankelecom I.F.J.: Journal of Applied Polymer Science 2015, 132, 42130. https://doi.org/10.1002/app.42130
• [24] Zolfaghari A., Mousavi S.A., Bozarjomehri R.B. et al.: Journal of Membrane Science 2018, 563, 813. https://doi.org/10.1016/j.memsci.2018.05.034
• [25] Duarte A.P., Cidade M.T., Bordado J.C.: Journal of Applied Polymer Science 2006, 100(5), 4052. https://doi.org/10.1002/app.23237
• [26] Wang X., Li Z., Zhang M. et al.: RSC Advances 2017, 7(17), 10503. https://doi.org/10.1039/C6RA28762J
• [27] Ismail N.M., Jakariah N.R., Bolong N. et al.: Journal of Applied Membrane Science and Technology 2017, 21(1), 33. https://doi.org/10.11113/amst.v21i1.107
• [28] Amirabedin P., Yegani R.: Journal of Textiles and Polymers 2014, 2, 31.
• [29] Bai H., Zhou Y., Wang X. et al.: Procedia Environmental Sciences 2012, 16, 346. https://doi.org/10.1016/j.proenv.2012.10.049
• [30] Hudaib B., Al-qodah Z., Abu-zurayk R. et al.: Case Studies in Chemical and Environmental Engineering 2024, 9, 100692. https://doi.org/10.1016/j.cscee.2024.100692
• [31] Asiri A.M., Pugliese V., Petrosino F. et al.: Polymers, 2022, 14(3), 636. https://doi.org/10.3390/polym14030636