Determination of the linear correlation coefficient between Young’s modulus and the compressive strength in fibre-reinforced concrete based on experimental studies

• Autorzy: Czajkowska Agnieszka , Raczkiewicz Wioletta , Ingaldi Manuela

Identyfikatory

DOI

10.30657/pea.2023.29.33

• Języki publikacji: PL

Abstrakty

EN

The test procedures for determining Young's modulus in concrete are complicated and time-consuming. Therefore, attempts to search for alternative methods of its determination are not surprising. The relationship between the value of compressive strength and Young's modulus in concrete is known. However, the strength of this relationship in fibre-reinforced concrete has not been exactly described. The article attempts to investigate the strength of the correlation between Young’s modulus and the compressive strength of fibre-reinforced concrete. The influence of the amount of fibres on this relationship was also checked. Two types of specimen were used for the tests. The specimens differed in the content of steel fibres, 0.25% and 0.50%, respectively. In order to determine the correlation relationship, the method of linear regression and the coefficient of linear correlation were used. The use of the determination coefficient allowed us to examine the degree of explanation of one variable by another.

Słowa kluczowe

EN

young's modulus; compressive strength; fibre reinforced concrete; linear regression method; linear correlation coefficient

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2023
• Tom: Vol. 29, Iss. 3
• Strony: 298--297
• Opis fizyczny: Bibliogr. 55 poz., rys., tab.

Twórcy

autor

Czajkowska Agnieszka

• Kielce University of Technology, 25-314 Kielce, Poland

autor

Raczkiewicz Wioletta

• Kielce University of Technology, 25-314 Kielce, Poland

autor

Ingaldi Manuela

• Czestochowa University of Technology, 42-201 Częstochowa, Poland

Bibliografia

• 1. Alsharie, H., 2015. Applications and Prospects of Fibre Reinforced Concrete in Industrial Floors. Open Journal of Civil Engineering, 5,(2), 185-189.
• 2. Anaman, K.A., Osei-Amponsah, C., 2007. Analysis of the causality links between the growth of the construction industry and the growth of the macroeconomy in Ghana. Construction Management and Economics, 25, 951-961.
• 3. Angelini, C., 2019. Regression Analysis, Ranganathan, S., Nakai,K., Schonbach, Ch. (eds.) Encyclopedia of Bioinformatics and Computational Biology: ABC of Bioinformatics. Elsevier, 722-730.
• 4. Bencardino F., Rizzuti L., Spadea G., Swamy R.N., 2008. Stress-strain behavior of steel fibre-reinforced concrete in compression. Journal of Materials in Civil Engineering, 20(2), 255-263.
• 5. Bencardino F., Rizzuti L., Spadea G., Swamy R.N., 2010. Experimental evaluation of fibre reinforced concrete fracture properties. Composites Part B: Engineering, 41(1), 17-24.
• 6. Boadu, E.F., Wang, C.C., Sunindijo, R.Y., 2020. Characteristics of the Construction Industry in Developing Countries and Its Implications for Health and Safety: An Exploratory Study in Ghana. International Journal of Environmental Research and Public Health, 17(11), 4110.
• 7. Borkowski, S., Czajkowska, A., 2012. Quality aspects of pressure alloy die Al-Si casting, The Publishing House of the Association of Quality and Production Managers, Częstochowa, Poland.(in Polish).
• 8. Brandt, A.M., 2008. Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering. Composite Structures, 86(1(3)), 3-9.
• 9. Brandt, A.M., 2009. Cement Based Composites: materials, mechanical properties and performance. Taylor & Francis
• 10. Chalioris, C.E., Panagiotopoulos, T.A., 2018. Flexural analysis of steel fibre-reinforced concrete members. Computers and Concrete, 22(1), 11-25.
• 11. Chen, W., 2006. Design and specification of fibre reinforced shotcrete for underground supports. In: Conference: North American Tunneling Conference 2006, 10-15 June, 2006, Chicago, IL, USA. Book Series: Proceedings and Monographs in Engineering Water and Earth Sciences, 331-335.
• 12. Czajkowska, A., Ingaldi M., 2022. Influence of Steel Fibers Content on Selected Mechanical Properties - Experimental Tests. Manufacturing Technology, 22(2), 267-278.
• 13. Czajkowska, A., Raczkiewicz, W., Bacharz, M., Bacharz, K., 2020. Influence of maturing conditions of steel-fibre reinforced concrete on its selected parameters. Construction of Optimized Energy Potential, 9(1), 45-54.
• 14. Fidlerova, H., Poplawski, L. and Surowka, M., 2022. Replacement of the expanded polystyrene with polyethylene in the packaging. Przemysł Chemiczny, 100(5), 432-435.
• 15. Galobardes, I., Cavalaro, S.H., Aguado, A., Garcia, T., Rueda, A., 2014. Correlation between the compressive strength and the modulus of elasticity of sprayed concrete. In: 7th International Symposium On Sprayed Concrete - Modern Use of Wet Mix Sprayed Concrete for Underground Support, 16-19. June 2014, Sandefjord, Norway, 1-13.
• 16. Ghaffar, A., Chavan, A.S.,Tatwawadi R.S., 2014. Steel Fibre Reinforced Concrete. International Journal of Engineering Trends and Technology, 9(15), 791-796.
• 17. Helbrych P., 2021. Effect of dosing with propylene fibers on the mechanical properties of concretes. Construction of Optimized Energy Potential (CoOEP), 10(2), DOI: 10.17512/bozpe.2021.2.05
• 18. Jamroży, Z., 2008. Concrete and its technologies. Wydawnictwo Naukowe PWN, Warszawa, Poland, (in Polish).
• 19. Jóźwiak, J., Podgórski, J., 1994. Statistics from scratch. PWN, Warszawa, Poland (in Polish).
• 20. Jurowski, K., Grzeszczyk, S., 2015. The Influence of Concrete Composition on Young's Modulus. Procedia Engineering, 108, 584-591.
• 21. Karwowska, J., Łapko, A., 2011. The usability of using modern fibre reinforced composites in building constructions. Civil and Environment Engineering, 2(1), 41-46 (in Polish).
• 22. Katzer, J., 2003. Steel fibers used to modify concrete. Budownictwo, Technologie, Architektura, 3(23), 46-47 (in Polish).
• 23. Kopiika, N., Vegera P., Vashkevych R., Blikharskyy Z., 2021. Stress-strain state of damaged reinforced concrete bended elements at operational load level. Production Engineering Archives, 27(4), 242-247.
• 24. Kraus, P., Náprstková, N., Jirounková, K., Cais, J., Svobodová, J., 2018. Effect of Heat Treatment on the Microstructure of the Alloy AlSi7CrM-nCu2.5. Manufacturing Technology, 18(6), 935-942.
• 25. Krynke, M., Ivanova, T.N., Revenko, N.F., 2022. Factors, increasing the efficiency of work of maintenance, repair and operation units of industrial enterprises. Management Systems in Production Engineering, 30(1), 91-97.
• 26. Kucharikova, L., Mazur, M., Tillova, E., Chalupova, M., Zavodska, D., Vasko, A., 2019. Fracture surfaces of the secondary A226 cast alloy with 0.9% Fe. Engineering Failure Analysis, 105, 688-698.
• 27. Kytinou, V.K., Chalioris, C.E., Karayannis, C.G., 2020. Analysis of Residual Flexural Stiffness of Steel Fibre-Reinforced Concrete Beams with Steel Reinforcement. Materials, 13(12), 2698.
• 28. Lee, M.K., Barr, B.I.G., 2003. Strength and fracture properties of industrially prepared steel fibre-reinforced concrete. Cement and Concrete Composites, 25(3), 321-332.
• 29. Logoń, D., Schabowicz, K., Roskosz, M., Fryczowski, K., 2021. The Increase in the Elastic Range and Strengthening Control of Quasi Brittle Cement Composites by Low-Module Dispersed Reinforcement: An Assessment of Reinforcement Effects. Materials, 14(2), No 341.
• 30. Lustosa, P.R., Magalhaes, M.D.S., 2019. Influence of fly ash on the compressive strength and young's modulus of concrete. In: 3rd International Conference on Bio-Based Building Materials - ICBBMAt, Belfast, UK, 107-111.
• 31. Marill, K.A., 2004. Advanced statistics: linear regression, part I: simple linear regression. Academic Emerge Medicine, 11(1), 87-93.
• 32. Michałek, J., 2015. Determination of the modulus of elasticity of concrete in compression. Building Materials, 6, 64-65 (in Polish).
• 33. Michałowska-Maziejuk, D., Teodorczyk, M., 2018. The use of a concrete testing machine as teaching equipment in engineering education. Scientific and Didactic Equipment, 23(2), 55-61.
• 34. Noguchi, T., Nemati, K.M., 1995. Relationship between compressive strength and modulus of elasticity of high strength concrete. Journal of Structural and Construction Engineering, 474(1), 1-10.
• 35. Ostasiewicz, S., Rusnak, Z. Siedlecka, U., 1998. Statistics. Elements of Theory and Tasks. Publishing House of the Oskar Lange, Wrocław, Poland (in Polish).
• 36. Pachura, A., 2012. Innovation theory - an epistemological aspects. Polish Journal Of Management Studies, 5, 128-135.
• 37. PN EN 12504-1 Concrete tests in structures. Part 1: Core drilling - Cutting, evaluation and compressive strength testing.
• 38. PN-EN 12390-1:2013-03 Concrete test - Part 1: Shape, dimensions and other requirements of test specimens and molds.
• 39. PN-EN 12390-13:2014-02 Concrete test. Part 13: Determination of the secant modulus of elasticity in compression.
• 40. PN-EN 12390-2:2001 Concrete test. Part 2: Preparation and maintenance of specimens for strength tests.
• 41. PN-EN 12390-3:2002 Concrete test. Part 3: Compressive strength of specimens to be tested.
• 42. PN-EN 12390-4:2001 Concrete test. Part 4: Compressive strength. Requirements for testing machines.
• 43. Raczkiewicz, W., 2016. Effect of concrete addition of selected micro-fibres on the reinforcing bars corrosion in the reinforced concrete specimens. Advances In Materials Science, 16(3), 38-46.
• 44. Raczkiewicz, W., Kossakowski, P.G., 2019. Electrochemical Diagnostics of Sprayed Fibre-Reinforced Concrete Corrosion. Applied Sciences, 9(18), 3763.
• 45. Schneider, A., Hommel, G., Blettner, M., 2010. Linear regression analysis: part 14 of a series on evaluation of scientific publications. Deutsches Arzteblatt international, 107(44), 776-782.
• 46. Skarżyński, Ł.,Suchorzewski, J., 2018. Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibres using Digital Image Correlation technique and X-ray micro computed tomography. Construction and Building Materials, 183, 283-299.
• 47. Song, P.S., Hwang, S., 2004. Mechanical properties of high-strength steel fibre reinforced concrete. Construction and Building Materials, 18(9), 669-673.
• 48. Steenbergen, R.D.J.M., Vervuurt, A.H.J.M., 2012. Determining the, in situ concrete strength of existing structures for assessing their structural safety. Structural Concrete, 3(1), 27-31.
• 49. Szajnar, J., Walasek, A., Baron, C., 2013. Tribological and corrosive proper-ties of the parts of machines with surface alloy layer. Archives Of Metallurgy And Materials, 58(3), 931-936.
• 50. Šadzevičius R., Gurskis V., Ramukevičius D., 2023. Research on the proper-ties of concrete with hemp shives, Construction of Optimized Energy Potential (CoOEP), 12, 25-32, DOI: 10.17512/bozpe.2023.12.03
• 51. Thomas, J., Ramaswamy, A., 2007. Mechanical Properties of Steel Fibre-Reinforced Concrete. ASCE Journal of Materials in Civil Engineering, 19(5), 385-395.
• 52. Trąmpczyński, W., Goszczyńska, B.,Bacharz, M., 2020. Acoustic Emission for Determining Early Age Concrete Damage as an Important Indicator of Concrete Quality/Condition before Loading. Materials, 13(16), 3523.
• 53. Ulewicz, R., Ulewicz M., 2020. Problems in the Implementation of the Lean Concept in the Construction Industries. Lecture Notes in Civil Engineering, 47, 495-500.
• 54. Vavru, M., Koteš, P., 2022. Methods of Modeling Contact between Concrete and Fiber Concrete, Diffusion and Defect Data Pt. B: Solid State Phenomena, 329, 87-92.
• 55. Yan, X., Liu, L.M., Zhang, J.P, Li, Y.H., Wang, H. et al., 2018. Experimental Study on Basic Mechanical Properties of Steel Fibre-Reinforced Siliceous Wet Shotcrete. Advances In Materials Science And Engineering, 1637261.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).