PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Dilatometric Analysis of the Sintering Behavior of Bi2Te3 Thermoelectric Powders

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The sintering behavior of p-type bismuth telluride powder is investigated by means of dilatometric analysis. The alloy powders, prepared by ball milling of melt-spun ribbons, exhibit refined and flake shape. Differential thermal analysis reveals that the endothermic peak at about 280°C corresponds to the melting of bismuth, and peaks existing between 410°C and 510°C are presumably due to the oxidation and crystallization of the powder. The shrinkage behavior of ball-milled powders was strongly dependent of heating rate by the thermal effect exerted on specimens. In the case of 2°C/min, the peak temperature for the densification is measured at 406°C, while the peak temperature at a heating rate of 20°C/min is approximately 443°C. The relative density of specimen pressureless-sintered at 500°C exhibited relatively low value, and thus further study is required in order to increase the density of sintered body.
Twórcy
autor
  • Seoul National University of Science and Technology, Department of Materials Science and Engineering, Seoul 01811, Republic of Korea
  • Seoul National University of Science and Technology, Department of Materials Science and Engineering, Seoul 01811, Republic of Korea
autor
  • Seoul National University of Science and Technology, Department of Materials Science and Engineering, Seoul 01811, Republic of Korea
  • Seoul National University of Science and Technology, Department of Materials Science and Engineering, Seoul 01811, Republic of Korea
autor
  • Seoul National University of Science and Technology, Department of Visual Optics, Seoul 01811, Republic of Korea
autor
  • Seoul National University of Science and Technology, Department of Materials Science and Engineering, Seoul 01811, Republic of Korea
Bibliografia
  • [1] D. Champier, Energ. Convers. Manag. 140,167 (2017).
  • [2] M. Sajid, I. Hassan, A. Rahman, Renew. Sustain. Energy Rev. 78, 15 (2017).
  • [3] J. Jiang, L. Chen, S. Bai, Q. Yao, Q. Wang, J. Crystal Growth 277, 258 (2005).
  • [4] X. Fan, Z. Rong, F. Yang, X. Cai, X. Han, G. Li, J. Alloys Comp. 630, 282 (2015).
  • [5] G. Delaizira, G. Bernard-Granger, J. Monnier, R. Grodzki, O. Kim-Hak, P.-D. Szkutnik, M. Soulier, S. Saunier, D. Goeuriot, O. Rouleau, J. Simon, C. Godart, C. Navone, Mater. Res. Bull. 47, 1954 (2012).
  • [6] H. R. Williams, R. M. Ambrosi, K. Chen, U. Friedman, H. Ning, M. J. Reece, M. C. Robbins, K. Simpson, K. Stephenson, J. Alloys Comp. 626, 368 (2015).
  • [7] C.-H. Lee, Y.-W. Shin, H.-S. Shin, D.-H. Yeo, S. Nahm, Nanosci. Nanotechnol. Lett. 9, 40 (2017).
  • [8] M. Zakeri, M. Allahkarami, Gh. Kavei, A. Khanmohammadian, M. R. Rahimipour, J. Mater. Proc. Tech. 209, 96 (2009).
  • [9] R. Setnescu, I. Bancuta, T. Setnescu, V. Cimpoca, S. Jipa, I. V. Popescu, J. Sci. Arts 12, 95 (2010).
  • [10] S.-J. Jung, S. K. Kim, H.-H. Park, D.-B. Hyun, S.-H. Baek, J.-S. Kim, J. Nanomater. 2013, 1 (2013).
  • [11] G. Sundberg, P. Paul, C. Sung, T. Vasilos, J. Mater. Sci. 41, 485 (2006).
Uwagi
EN
1. This study was supported by the Advanced Research Project funded by the SeoulTech (Seoul National University of Science and Technology).
PL
2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-5b758462-0155-4b92-b684-809efb989e70
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.