Influence of Perforation of the Inner Layer on the Properties of Three-Layer Welded Materials Ordered Alumina Membrane

• Autorzy: Kuczek Ł. , Muzykiewicz W. , Mroczkowski M. , Wiktorowicz J.

Identyfikatory

DOI

10.24425/amm.2019.129485

• Języki publikacji: EN

Abstrakty

EN

Multilayered materials give a range of possibilities with regard to control of their properties through selection of layers’ materials, their thickness and the layout of layers. This research is focused on examining the behaviour of three-layer material with perforated sheet as the inner layer during the stretching and drawing process. Four remove tests were carried out: Erichsen, Engelhardt-Gross, Fukui and cup drawing test. Mechanical properties and weld quality were also determined. Sheets with four perforations were used: Po2s3, Po2s4, Po2s10 and Po2s30, which corresponds to the open area values of 34.9%, 19.6%, 3.1% and 0.35%.

Słowa kluczowe

EN

multi-layered material; perforated sheet; welding; drawability

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 991--996
• Opis fizyczny: Bibliogr. 9 poz., fot., rys., tab.

Twórcy

autor

Kuczek Ł.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Muzykiewicz W.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Mroczkowski M.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Wiktorowicz J.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30, 30-059 Krakow, Poland

Bibliografia

• [1] D. R. Lesuer, C. K. Syn, O. D. Sherby, J. Wadsworth, J. J. Lewandowski, W. H. Hunt, Int. Mater. Rev. 41, 169-197 (1996).
• [2] J. Inoue, S. Nambu, Y. Ishimoto, T. Koseki, Scripta Mater. 59, 1055-1058 (2008).
• [3] M. H. Serror, J. Adv. Res. 4, 83-92 (2013).
• [4] T. Kubina, J. Nachazel, Mater. Tehnol. 51 (4), 557-561 (2017).
• [5] C. M. Cepeda-Jimenez, P. Hidalgo, M. Pozuelo, O. A. Ruano, F. Carreno, Metall. Trans. A 41 (1), 61-72 (2010).
• [6] W. Muzykiewicz, M. Wieczorek, M. Mroczkowski, P. Palka, L. Kuczek, Met. Form. 27 (4), 283-300 (2016).
• [7] L. Kuczek, W. Muzykiewicz, M. Wieczorek, M. Mroczkowski, P. Palka, D. Zieba, PLASTMET2018: Integrated studies of foundations of plastic deformation of metals, November 27-30, 2018 Lancut.
• [8] W. Muzykiewicz, The formability of perforated metal sheets, Publishing House “AKAPIT”, Krakow 2013.
• [9] S. C. Baik, H. N. Han, S. H. Lee, K. H. Oh, D. N. Lee, Int. J. Mech. Sci. 39 (7), 781-793 (1997).

Uwagi

EN

1. Dean’s Grant no 15.11.180.964 supported this work.

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).