Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper presents a prototype semi-industrial cooling line developed by the authors, which makes it possible to design a thermal treatment of forgings with the use of the forging heat, together with exemplary test results for forgings forked type. The proposed method of heat treatment dedicated to these forgings was described and compared to traditionally used heat treatment method in chamber furnaces. Next, the original research stand was presented, which performs mechanical fatigue test on final products – forked-type forgings. Forgings after heat treatment and cooling on the prototype line were tested on this stand in condition of cyclically variable mechanical loads in order to resistance to mechanical fatigue was analyzed and the influence of performed exemplary heat treatment on mechanical properties. The presented preliminary investigations performed on the designed combined research standing, consisting of: the prototype controlled cooling line, as well as mechanical fatigue stand point to the possibility of implementing thermal treatment with the use of the heat generated during the forging process and determining its impact on the mechanical properties of forgings.
Wydawca
Czasopismo
Rocznik
Tom
Strony
685--696
Opis fizyczny
Bibliogr. 30 poz., fot., rys., tab.
Twórcy
autor
- Wroclaw University of Science and Technology, Metal Forming, Welding and Metrology, 5 Lukasiewicza Str., 50-371 Wrocław, Poland
autor
- Wroclaw University of Science and Technology, Metal Forming, Welding and Metrology, 5 Lukasiewicza Str., 50-371 Wrocław, Poland
autor
- Wroclaw University of Science and Technology, Metal Forming, Welding and Metrology, 5 Lukasiewicza Str., 50-371 Wrocław, Poland
autor
- Wroclaw University of Science and Technology, Metal Forming, Welding and Metrology, 5 Lukasiewicza Str., 50-371 Wrocław, Poland
autor
- Wroclaw University of Science and Technology, Metal Forming, Welding and Metrology, 5 Lukasiewicza Str., 50-371 Wrocław, Poland
autor
- Wroclaw University of Science and Technology, Metal Forming, Welding and Metrology, 5 Lukasiewicza Str., 50-371 Wrocław, Poland
Bibliografia
- [1] Z. Gronostajski, Z. Pater, L. Madej, A. Gontarz et al., Archiv. Civ. Mech. Eng, 3, 898-941 (2019), DOI: 10.1016/j.acme.2019.04.005.
- [2] M. Hawryluk, A. Dolny, S. Mroziński, Archiv. Civ. Mech. Eng. 18, 465-478 (2018), DOI: 10.1016/j.acme.2017.08.002.
- [3] S. Maropoulos et al., Engineering Fracture Mechanics 71, 1695-1704 (2014).
- [4] P. Skubisz, Stal, Met Nowe Technol. 9-10, 66-70 (2015).
- [5] A. Milenin, T. Rec, W. Walczyk, M. Pietrzyk, Steel. Res. Int. 87, 519-528 (2014), DOI: 10.1002/srin.201500124.
- [6] S. Samanta, P. Biswas, S. Giri et al., Acta Mater. 105, 390-403 (2016), DOI: 10.1016/j.actamat.2015.12.027.
- [7] D. Kim, S.-J. Lee, B. C. De Cooman, Metall. Mater. Trans. A43, 4967-4983 (2012), DOI: 10.1007/s11661-012-1338-7.
- [8] S. Ebner, C. Suppan, R. Schnitzer, C. Hofer, Mater. Sci. Eng. A 735, 1-9 (2018), DOI: 10.1016/j.msea.2018.08.026.
- [9] K. Radwanski, R. Kuziak, R. Rozmus, Archiv. Civ. Mech. Eng, 19, 453-468 (2019), DOI: 10.1016/j.acme.2018.12.006.
- [10 ] J. Sińczak, ARBOR FP Kraków (2013).
- [11] T. Li, G. Liu, M. Xu et al., Acta Metall. Sin. 53, 1055-1064 (2017), DOI: 10.11900/0412.1961.2016.00457.
- [12] S. Li, H. Ji, B. Wang, Y. Mu, Archiv. Civ. Mech. Eng. 19, 391-404 (2019), DOI: 10.1016/j.acme.2018.11.006.
- [13] ASM Handbook Committee, ASM Handbook. Volume 4: Heat treatment (1991).
- [14] M. M. Avedesian, H. Baker, ASM specialty handbook: magnesium and magnesium alloys. ASM Int Mater Park OH 15 (1999).
- [15] K. P. Rao, Y.V.R.K. Prasad, K. Suresh, Mater. Sci. Eng. A 558, 30-38 (2012), DOI: 10.1016/j.msea.2012.07.040.
- [16] C. Pandey, M. M. Mahapatra, P. Kumar, F. Daniel, B. Adhithan, Archiv. Civ. Mech. Eng. 19, 297-310 (2019), DOI: 10.1016/j.acme.2018.10.005,
- [17] D. D. Krueger, Miner., Metals & Mater. Soc. 279-296 (2012). DOI: 10.7449/1989/superalloys_1989_279_296.
- [18] E. E. Brown, American Institute of Mechanical Engineers (1972).
- [19] M. Opiela. J. Mater. Eng. Perform. 23, 3379-3388 (2014), DOI: 10.1007/s11665-014-1111-8.
- [20] J. Adamczyk, A. Grajcar, 11th International Scientific Conference Achievements in Mechanical & Materials Engineering, 1-6 (2002).
- [21] M. S. Anwar, S. Prifiharni, E. Mabruri, IOP Conf. Ser. Mater. Sci. Eng. 202, 12-37 (2012), DOI: 10.1088/1757-899X/202/1/012037.
- [22] B. Garbarz, M. Adamczyk, Stal, Met. Nowe Technol. 7-8, 11-15 (2018).
- [23] V. K. Chandravanshi, A. Bhattacharjee, S. V. Kamat, T. K. Nandy, J. Alloys Compd. 589, 336-345 (2014), DOI: 10.1016/j.jall-com.2013.11.014.
- [24] Y. Deng, Y. Zhang, L. Wan, X. Zhang, Mater. Sci. Eng. A 554, 33-40 (2012), DOI: 10.1016/j.msea.2012.05.102.
- [25] P. Skubisz, H. Adrian, Numer Heat Transf. Part A Appl. 73, 163-176 (2018), DOI: 10.1080/10407782.2017.1421362.
- [26] B. Garbarz, T. Bołd, Met. Sci. 18, 357-361 (1984). DOI: 10.1179/030634584790419926.
- [27] P . Skubisz, A. Łukaszek-Sołek, Arch. Metall. Mater. 62, 2247-2254 (2017), DOI: 10.1515/amm-2017-0331.
- [28] Y. Tomita, T. Okawa, Mater. Sci. Technol. 11, 245-251 (1995). DOI: 10.1179/mst.1995.11.3.245.
- [29] P. Skubisz, J. Sinczak, Aircr. Eng. Aerosp. Technol. 90 (5), 713-719 (2018), DOI: 10.1108/AEAT-12-2015-0253.
- [30] P. Jabłoński, M. Hawryluk, J. Ziemba, M. Rychlik, 27th International Conference on Metallurgy and Materials, 384-390 (2018).
Uwagi
EN
1. This study was founded by National Centre for Research and Development, Poland (grant no. TECHMATSTRATEG1/348491/10/NCBR/2017).
PL
2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-5a535fad-1ae7-473a-821b-6e9726bfc258