Effect of the feed rate on the cutting forces during drilling in a standard hardwood plywood

• Autorzy: Podziewski P. , Górski J.
• Języki publikacji: EN

Abstrakty

EN

Effect of the feed rate on the cutting forces during drilling in a standard hardwood plywood. The level of cutting forces is a very important aspect of plywood machinability in the case of drilling The dependence between feed speed and cutting forces was tested in experimental way. The results of the study showed that the feed rate had a significant and strong linear effect on the axial force and on the cutting torque.

Słowa kluczowe

EN

plywood; cutting speed; axial force; drilling; cutting resistance

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2012
• Tom: No. 79
• Strony: 170--172
• Opis fizyczny: Bibliogr. 4 poz.

Twórcy

autor

Podziewski P.

autor

Górski J.

Bibliografia

• 1.PODZIEWSKI P., GÓRSKI J., 2011: Relationship between machining conditions and feed force during drilling in some wood-based materials. Annals of Warsaw University of Life Sciences – SGGW, No 75.
• 2.PODZIEWSKI P., GÓRSKI J., 2010: Feed rate influence on feed force and cutting torque while drilling in MDF (Middle Density Fiberboard). Annals of Warsaw University of Life Sciences – SGGW, No 72.
• 3.STANISZEWSKA A., ZAKRZEWSKI W., 2002: Obróbka cięciem, Wyd. AR w Poznaniu.
• 4.ORLICZ T., 1998: Obróbka drewna narzędziami tnącymi. Wyd. SGGW – AR w Poznaniu.