Alternative methods of the artificial fish lures manufacturing – case study

• Autorzy: Grabowik C. , Kalinowski K. , Ćwikła G. , Janik W. , Mazur J.
• Języki publikacji: EN

Abstrakty

EN

In this paper alternative methods of the artificial lures manufacturing are presented. Proposed approach is based on application of various contemporary techniques it is reverse engineering rapid prototyping and manufacturing and middle-end CAD modeler. It is proposed to use reverse engineering not only for gathering of existing parts 3D geometry but also for acquiring it just from fish. Moreover if there is a possibility to gather information about fish skin texture, with high end 3D scanners, the real-looking fishing lures would be produced. These scanned models are usually sufficiently good for production with rapid prototyping apparatus. In order to meet a client needs application of the middle-end CAD modeler – Inventor is proposed. It allows modeling a product geometry which is well matched to a client needs and requirements. Finally vacuum casting rapid manufacturing method for a small batch production of soft fishing lures is suggested. This paper gives an application example of each above mentioned methods

Słowa kluczowe

EN

pectus bracing; CAD; prototyping; case study; 3D scanner

PL

inżynieria odwrotna; CAD; prototypowanie; studium przypadku; skaner 3D

• Wydawca: Instytut Automatyzacji Procesów Technologicznych i Zintegrowanych Systemów Wytwarzania Politechniki Śląskiej
• Czasopismo: Selected Engineering Problems
• Rocznik: 2014
• Tom: nr 5
• Strony: 41--46
• Opis fizyczny: Bibliogr. 12 poz.

Twórcy

autor

Grabowik C.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice

autor

Kalinowski K.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice

autor

Ćwikła G.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice

autor

Janik W.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice

autor

Mazur J.

• Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice

Bibliografia

• 1. Grabowik C., Kalinowski K.: Object–Oriented Models in an Integration of CAD/CAPP/CAP Systems. LNAI 6678. Springer, vol. II, 2011, pp. 405–412.
• 2. Grabowik C., Janik W., Kalinowski K.: The die reconstruction of the sterile inflatable nasal tubes for haemorrhage prevention. Selected Engineering Problems 2013 nr 4, pp. 91-96.
• 3. Grabowik C., Janik W.: The concrete casting matrixes inserts design preparation based on the master models. Advanced Material Research 2013 vol. 702, pp. 259-262.
• 4. Kalinowski K., Grabowik C., Janik W.: Analysis and testing of the dimensional accuracy of parts made with the FDM technology. Selected Engineering Problems 2013 nr 4, pp. 103-108.
• 5. Grabowik C., Kalinowski K.: A review of rapid tooling technologies in technical production preparation. Selected Engineering Problems 2012 nr 3, pp. 87-92.
• 6. Grabowik C., Kalinowski K.: A review of rapid tooling technologies in technical production preparation - a vacuum casting practical example. Selected Engineering Problems 2012 nr 3, pp. 81-86.
• 7. Janik W.: The implementation of the material loss detection method in the author computer aided overhaul software, Advanced Materials Research vol. 1036 (2014) pp. 652-655.
• 8. Janik W.: The practical verification of the material loss detection method for cylindrical shape parts”, Advanced Materials Research Vol. 1036 (2014) pp. 656-661.
• 9. http://www.lsbaits.com/Craws-and-Creature-Baits_c7.htm [access: 30.06.2013].
• 10. Mazur J.: Alternatywne metody wytwarzania wędkarskich przynęt sztucznych. Master thesis, Silesian University of Technology, Gliwice 2014.
• 11. Kampa A.: Impact of rapid prototyping techniques for the manufacturing of new products. Selected Engineering Problems 2012 nr 3, Gliwice, 2012, pp. 93-96.
• 12. http://www.rapala.com/rapala/lures/shallow-shad - apandreg/Shallow+Shad+Rap.html?start =47&cgid=rapala-lures.