Heat Treatment of a Casting Element of a Through Clamp to Suspension of Electric Cables on Line Post Insulators

• Autorzy: Pezda J.

Identyfikatory

DOI

10.1515/afe-2016-0056

• Języki publikacji: EN

Abstrakty

EN

Heat treatment of a casting elements poured from silumins belongs to technological processes aimed mainly at change of their mechanical properties in solid state, inducing predetermined structural changes, which are based on precipitation processes (structural strengthening of the material), being a derivative of temperature and duration of solutioning and ageing operations. The subject-matter of this paper is the issue concerning implementation of a heat treatment process, basing on selection of dispersion hardening parameters to assure improvement of technological quality in terms of mechanical properties of a clamping element of energy network suspension, poured from hypoeutectic silumin of the LM25 brand; performed on the basis of experimental research program with use of the ATD method, serving to determination of temperature range of solutioning and ageing treatments. The heat treatment performed in laboratory conditions on a component of energy network suspension has enabled increase of the tensile strength R_m and the hardness HB with about 60-70% comparing to the casting without the heat treatment, when the casting was solutioned at temperature 520 ^oC for 1 hour and aged at temperature 165 ^oC during 3 hours.

Słowa kluczowe

EN

heat treatment; aluminum alloys; ATD; tensile strength; hardness HB

PL

obróbka cieplna; stopy aluminium; ATD; wytrzymałość na rozciąganie; twardość

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2016
• Tom: Vol. 16, iss. 3
• Strony: 89--94
• Opis fizyczny: Bibliogr. 23 poz., rys., tab., wykr.

Twórcy

autor

Pezda J.

• Department of Production Engineering and Automation, University of Bielsko-Biała, ul. Willowa 2, 43- 300 Bielsko-Biała, Poland

Bibliografia

• [1] Rometsch, P.A., Arnberg, L. & Zhang D.L. (1999). Modeling dissolution of Mg2Si and homogenization in Al-Si-Mg casting alloys. International Journal of Cast Metals Research. 12, 1-8.
• [2] Zhang, D.L., Zheng, L.H. & StJohn., D.H. (2002). Effect of a short solution treatment time on microstructure and mechanical properties of modified Al-7wt.%Si-0.3wt.%Mg alloy. Journal of Light Metals. 2(1), 27-36. DOI: 10.1016/S1471-5317(02)00010-X.
• [3] Pedersen, L. & Arnberg. L. (2001).The effect of solution heat treatment and quenching rates on mechanical properties and microstructures in AlSiMg foundry alloys. Metallurgical and Materials Transactions A. 32(3), 525-532. DOI: 10.1007/s11661-001-0069-y.
• [4] Pezda, J. (2014). Influence of heat treatment parameters on the mechanical properties of hypoeutectic Al-Si-Mg alloy. Metalurgija. 53(2), 221-224.
• [5] Timelli. G., Lohne. O., Arnberg. L., & Laukli. H.I. (2008). Effect of Solution Heat Treatments on the Microstructure and Mechanical Properties of a Die-Cast AlSi7MgMn Alloy. Metallurgical and Materials Transactions A. 39(7), 1747-1758. DOI: 10.1007/s11661-008-9527-0.
• [6] Górny, Z. (1992). Casting non-ferrous alloys. Warszawa: WNT. (in Polish).
• [7] Apelian, D., Shivkumar, S. & Sigworth, G. (1989). Fundamental Aspects of Heat Treatment of Cast Al-Si-Mg Alloys. AFS Transactions. 97, 727-742.
• [8] Zhang, D.L. & Zheng, L. (1996). The Quench Sensitivity of Cast Al-7 Wt Pct Si-0.4 Wt Pct Mg Alloy. Metallurgical and Materials Transactions A. 27(12), 3983-3991. DOI: 10.1007/BF02595647.
• [9] Zolotorevsky, V.S., Belov, N.A. & Glazoff, M.V. (2007). Casting Aluminium Alloys. Oxford: Elsevier.
• [10] Dobrzański, L.A. (2006). Engineering materials and materials design. Warszawa: WNT. (in Polish).
• [11] Li, R.X., et al. (2004). Age-Hardening Behavior of Cast Al-Si Base Alloy. Materials Letters. 58(15), 2096-2101. DOI: 10.1016/j.matlet.2003.12.027.
• [12] Polmear, I.J. (2006). Light Alloys. Oxford: Butterworth-Heinemann.
• [13] BS1490:1998: Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes.
• [14] Pietrowski, S. (2001). Silumins. Łódź. Technical University Editorial. (in Polish).
• [15] Piątkowski, J. & Gajdzik, B. (2013). Testing phase changes in Al-Si cast alloys with application of thermal analysis and differential calorimetric analysis. Metalurgija. 52(4), 469-472.
• [16] Szymczak. T., Gumienny, G. & Pacyniak, T. (2015). Effect of Vanadium and Molybdenum on the Crystallization, Microstructure and Properties of Hypoeutectic Silumin. Archives of Foundry Engineering. 15(4), 81-86.
• [17] Piątkowski, J. & Kamiński, P. (2015). Crystallization of AlSi17Cu5Mg Alloy after Time-thermal Treatment. Archives of Foundry Engineering. 15(1), 83-86.
• [18] Stawarz, M. & Szajnar, J. (2005). Qualification mechanical properties of ductile cast iron with ATD method. Archives of Foundry. 5(15), 361-370. (in Polish).
• [19] Polański, Z. (1984). Planning of experiments in technology. Warszawa: PWN. (in Polish).
• [20] Pezda, J. (2010). Heat treatment of EN AC-AlSi13Cu2Fe silumin and its effect on change of hardness of the alloy. Archives of Foundry Engineering. 10(1), 131-134.
• [21] Pezda, J. (2014). Effect of Shortened Heat Treatment on the Hardness and Microstructure of 320.0 Aluminium Alloy. Archives of Foundry Engineering. 14(2), 27-30.
• [22] PN-EN ISO 6892-1:2010P. Metals - Tensile test - Part1 - Test method in ambient temperature. Polish Committee for Standardization. (in Polish).
• [23] PN-EN ISO 6506-1:2008P. Metals - Brinell Hardness test - Part 1 - Test method. Polish Committee for Standardization. (in Polish).

Uwagi

EN

Opracowane ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.