The properties of mixtures of FAEE diesel and ethanol used to power compression ignition engines

• Autorzy: Piętak A. , Duda K. , Chraplewska N. , Ambrosewicz M. , Struś M.
• Języki publikacji: EN

Abstrakty

EN

Due to the continuous increase in prices of conventional fuels, the production of biofuels on an industrial, as well as small scale, nowadays is becoming more economically efficient. However, the usage of biofuels in its pure form is a problem when one have to supply them with modern injection systems. Due to the difference in parameters of biofuels in comparison with conventional fuels, the attempt to develop a mixture of optimal parameters for use in diesel engines, equipped with modern injection system, was made. Fuels derived from substrates which are produced independently of food production and which can energize CI engines are occupying now stronger market positions. Easier access to know-how and an uncomplicated production process result in technological development, not only in mass-scale plants but also in smaller devices which meet the needs of individual users or in which residues of other processes are neutralized or reused13 samples were tested, mixed of diesel, FAEE and ethyl alcohol. The mixtures were prepared and tested in The Department of Mechatronics in University of Warmia and Mazury for the most important parameters in the evaluation of possibility of usage to power modern compression ignition engines.

Słowa kluczowe

EN

biodiesel; combustion engines; air pollution; biofuels examination; biofuel mixtures; ethyl esters

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2013
• Tom: Vol. 20, No. 4
• Strony: 341--347
• Opis fizyczny: Bibliogr. 11 poz., rys.

Twórcy

autor

Piętak A.

• University of Warmia and Mazury in Olsztyn Faculty of Technical Sciences Department of Mechatronics and IT Education Słoneczna Street 46 A, 10-710 Olsztyn tel.: [phone], fax: + 48 89 524 51 50

autor

Duda K.

• University of Warmia and Mazury in Olsztyn Faculty of Technical Sciences Department of Mechatronics and IT Education Słoneczna Street 46 A, 10-710 Olsztyn tel.: [phone], fax: + 48 89 524 51 50

autor

Chraplewska N.

• University of Warmia and Mazury in Olsztyn Faculty of Technical Sciences Department of Mechatronics and IT Education Słoneczna Street 46 A, 10-710 Olsztyn tel.: [phone], fax: + 48 89 524 51 50

autor

Ambrosewicz M.

• University of Warmia and Mazury in Olsztyn Faculty of Technical Sciences Department of Mechatronics and IT Education Słoneczna Street 46 A, 10-710 Olsztyn tel.: [phone], fax: + 48 89 524 51 50

autor

Struś M.

• Institute of Metallurgy and Materials Engineering Polish Academy of Sciences Reymonta Street 25, 30-059 Krakow, Poland tel.: [phone], fax: [phone]

Bibliografia

• [1] Cieślikowski, B., Kształtowanie cech fizycznych i chemicznych biopaliw RME w aspekcie doboru odmian rzepaku i eksploatacji pojazdów rolniczych, Acta Agrophysica, 15(1), 33-43, 2010.
• [2] Corcione, F. E., et al., Temporal and Spatial Evolution of Radical Species in the Experimental and Numerical Characterization of Diesel Auto-Ignition, Proceedings of The Fifth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines (COMODIA 2001), pp. 355-363, Nagoya 2001.
• [3] PN–EN 116.
• [4] Jakóbiec, J., Ambrozik, A., Wybrane właściwości fizykochemiczne i użytkowe estrów metylowych kwasów tłuszczowych oleju rzepakowego jako paliwa silnikowego, Inżynieria Rolnicza 9(107), 2008.
• [5] Zając, G., Piekarski, W., Ocena poziomu zużycia paliwa przez silnik o zapłonie samoczynnym przy zasilaniu FAME i FAE, Inżynieria Rolnicza 8(117), 2009.
• [6] Chraplewska, N., Duda, K., Ethyl and methyl esters production field esterification plant. Journal of KONES Poertrain and Transport, Vol. 18, No. 4, pp. 47-54, 2011.
• [7] Piętak, A., Wierzbicki, S., Duda, K., Possibility of automation of a mobile biodiesel production plant, Solid State Phenomena. Mechatronic Systems, Mechanics and Materials, Vol. 180, pp. 76-88, 2012.
• [8] Piętak, A., Chraplewska, N., Duda, K., Examining the quality of custom production’s biofuels, Journal of KONES Powertrain and Transport, Vol. 17, 2010.
• [9] Duda, K., Rozmarynowski, Z., Chraplewska, N., Adaptive control algorithm of the field esterification plant, Journal of KONES Powertrain and Transport, Vol. 19, No. 196, 2012.
• [10] Podkówka, W., Biodiesel, gliceryna, pasza z rzepaku, Wydawnictwo Uczelniane Akademi Techniczno-Rolniczej, 44-71.
• [11] Świadectwo jakości dla oleju napędowego nr 40339280 A/A – Gdańsk. 28.02.