Construction and technical modification of grinding wheels for internal cylindrical grinding using SCAMPER method of creative innovation design

• Autorzy: Plichta J. , Nadolny K. , Gierszewska E.

Identyfikatory

DOI

10.30464/jmee.2018.2.1.27

• Języki publikacji: EN

Abstrakty

EN

This article describes a case study of an application of the method of creating innovations called SCAMPER for the development of new abrasive tools designed for machining of hard-to-cut materials. The SCAMPER method is used for innovative transformations of existing products, aimed at a modernization of their design, a construction and an extension of functions. This method was used in the procedure of modifying abrasive tools and it permitted a generation of a set of innovative solutions in this field. The methodology made it also possible to logically organize individual creative activities supported by the previously accumulated theoretical and experimental knowledge.

Słowa kluczowe

EN

SCAMPER method; innovative tool; grinding process; grinding wheel; hard-to-cut materials

PL

metoda SCAMPER; narzędzie innowacyjne; szlifowanie; ściernica; materiały trudnoskrawalne

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2018
• Tom: Vol. 2, No 1
• Strony: 27--32m
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Plichta J.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Raclawicka 15-17, 75-620 Koszalin, Poland

autor

Nadolny K.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Poland

autor

Gierszewska E.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Poland

Bibliografia

• 1. Baran J., Plichta J. (2010) Construction design of a multi-tool head for grinding of large openings. Mechanic, Vol. 83, No. 2, pp. 135. (in Polish)
• 2. Bentley S.A., Goh N.P., Aspinwall D.K. (2001) Reciprocating surface grinding of a gamma titanium aluminide intermetallic alloy. Journal of Materials Processing Technology, Vol. 118, pp. 22-28.
• 3. Cempel C. (2013) Creativity engineering in innovation design. Publishing House of the Institute of Applied Mechanics at Poznań University of Technology, Poznań. (in Polish)
• 4. Ezugwu E.O. (2005) Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools & Manufacture, Vol. 45, pp. 1353-1367.
• 5. Herman D. (1998) Glass and glass-ceramic binder obtained from waste material for binding alundum abrasive grains into grinding wheels.Ceramics International, Vol. 24, pp. 515-520.
• 6. Herman D., Markul J. (2004) Influence of microstructures of binder and abrasive grain on selected operational properties of ceramic grinding wheels made of alumina. International Journal of Machine Tools & Manufacture, Vol. 44, pp. 511-522.
• 7. Herman D., Plichta J., Karpinski T. (1997) Effect of glass-crystalline and amorphous binder application to abrasive tools made of microcrystalline alumina grains type SG. Wear, Vol. 209, pp. 213-218.
• 8. Herman D., Plichta J., Nadolny K. (2006) New ceramic abrasive tools for rough and finishing grinding in one pass. Materials Science Forum, Vol. 526, pp. 163-168.
• 9. Nadolny K. (2013) Microdiscontinuities of the grinding wheel and their effects on its durability during internal cylindrical grinding. Machining Science and Technology, Vol. 17, No. 1, pp. 74-92. DOI: 10.1080/10910344.2012.747900.
• 10. Nadolny K. (2015) Small-dimensional sandwich grinding wheels with a centrifugal coolant provision system for traverse internal cylindrical grinding of steel 100Cr6. Journal of Cleaner Production, Vol. 93, pp. 354-363. DOI: 10.1016/j.jclepro.2015.01.046
• 11. Nadolny K., Habrat W. (2017) Potential for improving efficiency of the internal cylindrical grinding process by modification of the grinding wheel structure. Part I: grinding wheels made of conventional abrasive grains. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 231, No. 4, pp. 621-632. DOI: 10.1177/0954408916637100.
• 12. Nadolny K., Habrat W. (2017) Potential for improving efficiency of the internal cylindrical grinding process by modification of the grinding wheel structure. Part II: grinding wheels made of superabrasive grains. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 231, No. 4, pp. 813-823. DOI: 10.1177/ 0954408916638799.
• 13. Nadolny K., Kapłonek W., Wojtewicz M., Sienicki W. (2013) Effects of sulfurization of grinding wheels on internal cylindrical grinding of Titanium Grade 2®. Indian Journal of Engineering & Materials Sciences, Vol. 20, No. 2, pp. 108-124.
• 14. Nadolny K., Plichta J. (2005) Single-pass internal cylindrical grinding process with zone-diversified structure grinding wheels. Archives of Mechanical Technology and Materials, Vol. 25, No. 2, pp. 31-40. (in Polish)
• 15. Nadolny K., Plichta J., Radowski M. (2015) Reciprocal internal cylindrical grinding integrated with centrifugal dynamic burnishing of hard-to-cut materials. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 229, No. 4, pp. 265-279. DOI:10.1177/ 0954408914527925.
• 16. Nadolny K., Sienicki W., Wojtewicz M. (2015) The effect upon the grinding wheel active surface condition whenimpregnating with non-metallic elements during internal cylindrical grinding of titanium. Archives of Civil and Mechanical Engineering, Vol. 15, No. 1, pp. 71-86. DOI: 10.1016/j.acme.2014.03.004.
• 17. Nadolny K., Sienicki W., Wojtewicz M. (2017) The effect of sulfurization on the grinding wheel cutting ability in the internal cylindrical grinding of nickel superalloys. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, Vol. 231, No. 1, pp. 140-154. DOI: 10.1177/ 0954405415572643.
• 18. Plichta J., Nadolny K. (2012) Highly effective grinding of hard-to-cut materials. Publishing house of the Koszalin University of Technology, Koszalin. (in Polish)
• 19. Staniewicz-Brudnik B., Plichta J., Nadolny K. (2005) The effect of porous glass-ceramic materials addition on the cubic boron nitride (cBN) tools properties. Optica Applicata, Vol. 35, No. 4, pp. 810-819.
• 20. Sutowski P., Nadolny K. (2013) The effect of the method of coolant delivery in the internal cylindrical grinding process on the efficiency of Inconel® alloy 600 machining. Mechanic, Vol. 86, No. 8-9, publication on CD. (in Polish)
• 21. Teicher U., Ghosh A., Chattopadhyay A.B., Künanz K. (2006) On the grindability of titanium alloy by brazed type monolayered superabrasive grinding wheels. International Journal of Machine Tools & Manufacture, Vol. 46, pp. 620-622.
• 22. Tso P.L. (1995) Study on the grinding of Inconel 718. Journal of Materials Processing Technology, Vol. 55, pp. 421-426.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).