Machinability of modified AlSi7Mg0,3 alloy

• Autorzy: Naprstkova N. , Cais J.
• Języki publikacji: EN

Abstrakty

EN

Al Alloys have an important position in the industry, mainly in the automotive and aerospace industries. One important group is silumins (Al-Si alloys). Al-Si alloys are the leading casting alloys based on aluminum. Machining of aluminum alloys is currently frequently used and it is an important area of production. This paper deals with an experiment that was conducted at the Faculty of Production Technology and Management, University of Jan Evangelista Purkyně in Ústí nad Labem, where alloy AlSi7Mg0,3 was experimented upon. Samples were made for processing from the master alloy AlSi7Mg0,3, subsequently unmodified and modified of Sr, Ca and Sb. This paper describes the evaluation of hardness, chip and tool wear in terms of how modification by Sr, Ca and Sb may affect analytical values.

Słowa kluczowe

EN

alloy; Al-Si; modification; machining; hardness; chip

PL

stop; Al-Si; modyfikacja; twardość; wiór

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2014
• Tom: Vol. 3, No. 2
• Strony: 10--13
• Opis fizyczny: Bibliogr. 14 poz. rys.

Twórcy

autor

Naprstkova N.

• Faculty of Production Technology and Management, Jan Evangelista Purkyně University in Ústí nad Labem, Pasteurova 1, 400 96, Ústí nad Labem, CZ, phone: [phone]

autor

Cais J.

• Faculty of Production Technology and Management, Jan Evangelista Purkyně University in Ústí nad Labem, Pasteurova 1, 400 96, Ústí nad Labem, CZ, phone: [phone]

Bibliografia

• 1. Bilík O., Mádl J. 2001. Trvanlivost břitu a provozní spolehlivost obráběcího nástroje (Tool life and reliability of cutting machine). Ústí nad Labem, UJEP Ústí nad Labem, CZ, 78 p. Knihovnička Strojírenská technologie (Bookcase Manufacturing Technology), CZ, ISBN 80-7044-398-8.
• 2. Czán A., Stančeková D., Ďurech L., Štekláč D., Martikáň J. 2006. Základy opotrebenia pri suchom tvrdom sústružení (Basics of wear in dry hard turning). conference Nástroje ITC 2006, 5. - 6. september 2006, Zlín, CZ.
• 3. Dugin A., Popov A. 2013. Increasing the accuracy of the effect of processing materiále and cutting tool wear on the ploughingforce values. Manufacturing Technology, Vol 13, No.2, pp.169-173, CZ, ISSN 1213-2489.
• 4. ISO 3685 1993. Tool-life testing with single-point turning tools,.
• 5. Kalincová D. 2010. Skúšanie mechanických vlastností materiálov - prehľad meracích metód a zariadení (Testing the mechanical properties of materials - an overview of measurement methods and equipments) . In Zvyšovanie efektívnosti vzdelávacieho procesu prostredníctvom inovačných prostriedkov. KEGA 3/6370/08., TU vo Zvolene, Zvolen, pp. 13-26, SK.
• 6. Mádl J., Kout V., Rázek V., Stránský R., Dufek V. 2004. Metoda pro simulaci zkoušek opotřebeni slinutych karbidů. Strojírenská technologie, Vol. IX, No. 1, pp. 28-32, CZ, ISSN 1211-4162.
• 7. Mádl J., 2012. Surface properties in Precise and Hard Machining. Manufacturing Technology, Vol 12, No.13, pp. 158-166, CZ, ISSN 1213-2489.
• 8. Michna Š., Kuśmierczak S. 2008. Technologie a zpracování hliníkových materiálů (Technology and processing of aluminum materials), UJEP. Ústí nad Labem, CZ, ISBN 978-80-7044-998-1.
• 9. Michna Š., Lukáč I., Očenášek V., Kořený R. Drápala J, Schneider, H., Miškufová A. a kol. 2005. Encyklopedie hliníku (Encyclopedia of aluminum) . Adin, Prešov, SK, ISBN 80-89041-88-4.
• 10. Michna Š. Naprstková N. 2011. The Mechanical Properties Optimizing of of Al - Si Alloys Precipitation Hardening and the Effect on the Character of the Chip, Acta Metallurgica Slovaca, No.3, SK, ISSN-1335-1532.
• 11. Michna Š., Nová I. 2008. Technologie a zpracování kovových materiálů (Technology and processing of metal materials) Adin, Prešov, SK, ISBN 978-80-89244-38-6.
• 12. Suchánek D., Dušák K. 2011. Impact of cutting conditions on tool wear. Strojírenská technologie, Vol. XVI, No.5, pp. 33-37, CZ, ISSN 1211-4162.
• 13. Šebelová E., Chladil J. 2013. Tool Wear and Machinability of Wood-based Material during Machining Process. Manufacturing Technology, Vol 13, No.2, pp.231-236, CZ, ISSN 1213-2489.
• 14. Weiss V. 2012. Prodloužení modifikačního účinku pomoci beryllia u slitin AlSi7Mg0,3 (Extending modifying effect using Be for AlSi7Mg0,3 Alloy). Slévárenství, No.5 – 6, CZ, ISSN 0037– 825.