The study of the tribological properties under high contact pressure conditions of TiN, TiC and TiCN coatings deposited by the magnetron sputtering method on the AISI 304 stainless steel substrate

• Autorzy: Mamaeva Axaule Alipovna , Kenzhegulov Aidar Karaulovich , Panochkin Aleksander Vladimirovich , Alibekov Zhasulan Zhanuzakovich , Kshibekova Balzhan Bolatovna , Wieleba Wojciech , Leśniewski Tadeusz , Bakhytuly Nauryzbek

Identyfikatory

DOI

10.2478/msp-2022-0055

• Języki publikacji: EN

Abstrakty

EN

Titanium carbonitride coatings are widely used to improve the wear resistance of surfaces. The results of tribological investigations of TiC, TiN, and TiCN coatings deposited on an AISI 304 steel substrate by the magnetron sputtering method were presented. The research aimed to describe the wear processes of the coatings during friction in an emergency situation, i.e. with a lack of lubrication and concentration of pressure in a small contact area. Tribological tests were performed on a ball-on-disk tribotester in reciprocating motion under technically dry friction conditions. The Hertz pressure in the contact area was ph = 2500-2700 MPa. Additionally, scratch tests and microscopic observations of the surfaces of the samples were performed after tribological tests to describe the wear process of the coatings. The results showed cracking, and coatings detachment from the substrate occur during friction. Deformation wear was observed as bulges in the material at the edge of the friction path. The deformation occurred primarily in the substrate material despite friction occurring on the surface of the coating. The best coating in terms of tribological properties was the TiN coating, which showed the highest resistance to wear in an emergency situation and the friction coefficient in the final stage of the test (above 90 cycles of movement) was only slightly higher than the values recorded for the other coatings. The TiN coating had high hardness, showed good adhesion to the substrate, and was not cracked, protecting it from damage.

Słowa kluczowe

EN

magnetron sputtering; titanium carbonitride; coefficient of friction; wear resistance; scratch test

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2023
• Tom: Vol. 41, No. 1
• Strony: 1--14
• Opis fizyczny: Bibliogr. 18 poz., rys., tab.

Twórcy

autor

Mamaeva Axaule Alipovna

• Institute of Metallurgy and Ore Beneficiation JSC at NJSC "Kazakh National Research Technical University named after K.I. Satbayev", Almaty, Kazakhstan

autor

Kenzhegulov Aidar Karaulovich

• Institute of Metallurgy and Ore Beneficiation JSC at NJSC "Kazakh National Research Technical University named after K.I. Satbayev", Almaty, Kazakhstan

autor

Panochkin Aleksander Vladimirovich

• Institute of Metallurgy and Ore Beneficiation JSC at NJSC "Kazakh National Research Technical University named after K.I. Satbayev", Almaty, Kazakhstan

autor

Alibekov Zhasulan Zhanuzakovich

• Institute of Metallurgy and Ore Beneficiation JSC at NJSC "Kazakh National Research Technical University named after K.I. Satbayev", Almaty, Kazakhstan

autor

Kshibekova Balzhan Bolatovna

• Institute of Metallurgy and Ore Beneficiation JSC at NJSC "Kazakh National Research Technical University named after K.I. Satbayev", Almaty, Kazakhstan

autor

Wieleba Wojciech

• Department of Fundamentals of Machine Design and Mechatronic Systems, Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland

autor

Leśniewski Tadeusz

• Department of Fundamentals of Machine Design and Mechatronic Systems, Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland

autor

Bakhytuly Nauryzbek

• Institute of Metallurgy and Ore Beneficiation JSC at NJSC "Kazakh National Research Technical University named after K.I. Satbayev", Almaty, Kazakhstan

Bibliografia

• [1] Cavaleiro A, Hosson JTh. Nanostructured coatings. New York: Springer, NY; 2006. doi:10.1007/978-0-387-48756-4.
• [2] Veprek S, Veprek-Heijman MJG. Industrial applications of superhard nanocomposite coatings. Surf Coat Technol. 2008;202: 5063–73.
• [3] Rupetsov V, Mishev G, Dishliev S, Kopanov V, Chitanov V, Kolaklieva L, et al. Increasing in the wear resistance of injection molds made of 1.2343 steel using Ti/TiN/TiCN/nc-TiCN:a-C/nc-TiC:a-C/a-C nanocomposite coating. In: 13th International Conference on Tribology, ROTRIB’16 IOP Conf. Ser: Mater Sci Eng. 2017;174: 012064. doi:10.1088/1757-899X/174/1/012064.
• [4] Rakhadilov B, Kozhanova R, Popova N, Nugumanova A, Kassymov A. Structural-phase transformations in 0.34C–1CRr–1Ni–1Mo–Fe steel during plasma electrolytic hardening. Mater Sci.-Pol. 2020;38(4): 699–706. doi:10.2478/msp-2020-0073.
• [5] Talib RJ, Zaharah AM, Selamat MA, Mahaidin AA, Fazira MF. Friction and wear characteristics of WC and TiCN-coated insert in turning carbon steel workpiece. Procedia Eng. 2013;68: 716–22. doi:10.1016/j.proeng.2013.12.244.
• [6] Kenzhegulov AK, Mamaeva AA, Panichkin AV, Alibekov ZhZh, Kshibekova B, Bakhytuly N, et al. Comparative study of tribological and corrosion characteristics of TiCN, TiCrCN, and TiZrCN coatings. Coatings. 2022;12(2): 564. doi:10.3390/coatings12020193.
• [7] Hussain A, Podgursky V, Antonov M, Viljus M, Goljandin D. TiCN coating tribology for the circular economy of textile industries. J Ind Text. 2022;51(5S): 8947–59. doi:10.1177/15280837211025726.
• [8] Saoula N, Madaoui N, Tadjine R, Erasmus RM, Shrivastava S, Comins JD. Influence of substrate bias on the structure and properties of TiCN films deposited by radio-frequency magnetron sputtering. Thin Solid Films. 2016;616: 521–9.
• [9] Akkaya SS, Vasyliev VV, Reshetnyak EN, Kaz-manlı K, Solak N, Strel’nitskij VE, et al. Structure and properties of TiN coatings produced with PIII&D technique using high efficiency rectilinear filter cathodic arc plasma. Surf Coat Technol. 2013;236: 332–40.
• [10] Mamaeva AA, Kenzhegulov AK, Panichkin AV, Alibekov ZhZh, Wieleba WK. Effect of magnetron sputtering deposition conditions on the mechanical and tribological properties of wear-resistant titanium carbonitride coatings. Coatings. 2022;12(2): 193. doi:10.3390/coatings12020193.
• [11] Zheng XH, Tu JP, Gu B, Hu SB. Preparation and tribological behavior of TiN/a-C composite films deposited by DC magnetron sputtering. Wear. 2008;26: 261–5. doi:10.1016/j.wear.2007.10.007.
• [12] Chen R, Tu JP, Liu DG, Mai YJ, Gu CD. Microstructure, mechanical and tribological properties of TiCN nanocomposite films deposited by DC magnetron sputtering. Surf Coat Technol. 2011;205: 5228–34. doi:10.1016/j.surfcoat.2011.05.034.
• [13] Razmi A, Yesildal R. Microstructure and mechanical properties of TiN/TiCN/TiC multilayer thin films deposited by magnetron sputtering. Int J Innovative Res Rev. 2021; 5(1): 15–20. Available from: 08.06.2022 http://www.injirr.com/article/view/67.
• [14] Polcar TR, Novak P, Siroky P. The tribological characteristics of TiCN coating at elevated temperatures. Wear. 2006;260: 40–9. doi:10.1016/j.wear.2004.12.031.
• [15] Kuptsov KA, Kiryukhantsev-Korneev PhV, Sheveyko AN, Shtansky DV. Comparative study of electrochemical and impact wear behavior of TiCN, TiSiCN, TiCr-SiCN, and TiAlSiCN coatings. Surf Coat Technol. 2013;216: 273–81. doi:10.1016/j.surfcoat.2012.11.058.
• [16] Fang T-H, Jian SR, Chuu DS. Nanomechanical properties of TiC, TiN and TiCN thin films using scanning probe microscopy and nanoindentation. Appl Surf Sci. 2004;228(1–4): 365–72. doi:10.1016/j.apsusc.2004.01.053.
• [17] Correa JF, Aperador W, Caicedo JC, Alba NC, Amaya C. Structural, mechanical and tribological behavior of TiCN, CrAlN and BCN coatings in lubricated and nonlubricated environments in manufactured devices. Mater Chem Phys. 2020;252: 123164. doi:10.1016/j.matchemphys.2020.123164.
• [18] Wang Q, Zhou F, Gao S, Zhou Z, Kwok-Yan Li L, Yan J. Effect of counterparts on the tribological properties of TiCN coatings with low carbon concentration in water lubrication. Wear. 2015; 328-329: 356–62. doi:10.1016/j.wear.2015.03.007.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).