Graphene oxide-modified cellulose acetate membranes with improved Congo red removal efficiency

• Autorzy: Jafer Mosa , Mindeel Hayder Ali , Hussein Abdullah A. , Ibrahim Naeemah A. , Taki Anmar Ghanim , Fawzi Nassar Maadh

Identyfikatory

DOI

10.14314/polimery.2024.10.3

Warianty tytułu

PL

Membrany z octanu celulozy modyfikowanego tlenkiem grafenu o poprawionej skuteczności usuwania czerwieni Kongo

• Języki publikacji: EN

Abstrakty

EN

The casting method was used to obtain membranes from cellulose acetate (CA) with different contents (0.1; 0.4; 0.8 wt%) of graphene oxide (GO). FESEM and FT-IR were used to evaluate the membrane structure. The contact angle was also examined. Congo red was used to evaluate the membrane efficiency. The contact angle of CA/GO membranes decreased from 55.47° (CA) to 38.16° (0.4 wt% GO), which indicates good dispersion of GO in the CA matrix. CA/GO membranes showed less irreversible fouling, which indicates that reversible fouling predominated over fouling of all membranes. Increasing the membrane porosity, pore size and hydrophilicity results in higher permeability.

PL

Metodą odlewania otrzymano z octanu celulozy (CA) membrany różniące się zawartością (0,1; 0,4; 0,8% mas.) tlenku grafenu (GO). Do oceny struktury membran zastosowano FESEM i FT-IR. Zbadano również kąt zwilżania. Czerwieni Kongo użyto do oceny wydajności membrany. Kąt zwilżania membran CA/GO zmniejszył się z 55,47° (CA) do 38,16° (0.4% mas. GO), co świadczy o dobrej dyspersji GO w osnowie CA. Membrany CA/GO wykazywały mniejsze nieodwracalne zanieczyszczenie, co wskazuje, że odwracalne zanieczyszczenie przeważało nad zanieczyszczeniem wszystkich membran. Zwiększenie porowatości membran, wielkości porów i ich hydrofilowości skutkuje większą przepuszczalnością.

Słowa kluczowe

EN

water treatment; graphene oxide; membranes; cellulose acetate

PL

uzdatnianie wody; tlenek grafenu; membrany; octan celulozy

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2024
• Tom: Vol. 69, nr 10
• Strony: 568--576
• Opis fizyczny: Bibliogr. 52 poz., rys., tab., wykr.

Twórcy

autor

Jafer Mosa

• Ministry of Education, Al-Karkh district, Baghdad10001, Iraq

• https://orcid.org/0009-0009-4557-5522

autor

Mindeel Hayder Ali

• Ministry of Education, Al-Karkh district, Baghdad10001, Iraq

• https://orcid.org/0009-0002-8198-3733

autor

Hussein Abdullah A.

• Polymer Research Center, University of Basrah, Basrah 61004, Iraq

• https://orcid.org/0009-0006-6621-8581

autor

Ibrahim Naeemah A.

• Southern Technical University, Basrah 61004, Iraq

• https://orcid.org/0009-0000-1012-5438

autor

Taki Anmar Ghanim

• Department of Radiology Techniques, health and medical techniques college, Alnoor University, Mosul, Iraq

• https://orcid.org/0009-0006-1262-9764

autor

Fawzi Nassar Maadh

• Integrated Chemical BioPhysics Research, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
• Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia

• https://orcid.org/0000-0002-1610-0538

Bibliografia

• [1] Almanassra I.W., Jaber L., Manawi Y. et al.: Chemical Engineering Journal 2024, 488, 151029. https://doi.org/10.1016/j.cej.2024.151029
• [2] Li Z., Chen M., Zhu W. et al.: Coordination Chemistry Reviews 2024, 520, 216124.https://doi.org/10.1016/j.ccr.2024.216124
• [3] Farooq N., ur Rehman Z., Hareem A. et al.: MatSci Express 2024, 1(4), 185.
• [4] Avornyo A., Chrysikopoulos C.V.: Journal of Environmental Management 2024, 353, 120178. https://doi.org/10.1016/j.jenvman.2024.120178
• [5] Vafa N., Firoozabadi B., Pishkenari H.N.: Journal of Molecular Liquids 2024, 407, 125241. https://doi.org/10.1016/j.molliq.2024.125241
• [6] Cano F.J., Coste S., Reyes-Vallejo O. et al.: Surfaces and Interfaces 2024, 46, 104004. https://doi.org/10.1016/j.surfin.2024.104004
• [7] Guo L., Wen Y., Li F. et al.: Suraces and Interfaces 2024, 51, 104727. https://doi.org/10.1016/j.surfin.2024.104727
• [8] Moriyama N., Takenaka R., Nagasawa H. et al.: ACS Applied Materials and Interfaces 2024, 16(6), 8086. https://doi.org/10.1021/acsami.3c16844
• [9] Azrak V., Öter Ö., Oğuzlar S. et al.: Journal of Materials Science: Materials in Electronics 2024, 35, 1679. https://doi.org/10.1007/s10854-024-13455-x
• [10] Fonsaca J.E.S., Lima C.E., Martins K.S.B. et al.: Langmuir 2024, 40(41), 21442. https://doi.org/10.1021/acs.langmuir.4c02235
• [11] Lin T., Wen X., Ren X. et al.: Small Structures 2024, 2400320. https://doi.org/10.1002/sstr.202400320
• [12] Vo T.S., Lwin K.M., Kim K.: Advanced Composites and Hybrid Materials 2024, 7, 127. https://doi.org/10.1007/s42114-024-00923-5
• [13] Wang Y., Zhang Y., Zuo H. et al.: Desalination 2024, 587, 117933. https://doi.org/10.1016/j.desal.2024.117933
• [14] Dai J., Li L., Fang Q. et al.: Chemical Engineering Journal 2024, 495, 153355. https://doi.org/10.1016/j.cej.2024.153355
• [15] Thangarasu S., Palanisamy G., Sadhasivam S. et al.: Journal of Materials Chemistry A 2024, 12, 11176. https://doi.org/10.1039/D4TA00001C
• [16] Manobalan S., Sumangala.: “MXene‐Based Polymer Composite Membranes for Pervaporation and Gas Separation” in “MXene Reinforced Polymer Composites: Fabrication, Characterization and Applications”, (editors: Deshmukh K., Pandey M., Hussain C.M.), Scivener Publishing, Beverly 2024). p. 501. https://doi.org/10.1002/9781119901280.ch15
• [17] Azadi E., Singh N., Dinari M. et al.: Chemical Communications 2024, 60, 2865. https://doi.org/10.1039/D3CC06057H
• [18] Feng F., Yang Y., Liu Q. et al.: Journal of Hazardous Materials 2024, 476, 134952. https://doi.org/10.1016/j.jhazmat.2024.134952
• [19] Ibrahim G.M., Alshahrani S.M., Alosaimi E.H. et al.: Journal of Molecular Structure 2024, 1298 (Part 1), 136992. https://doi.org/10.1016/j.molstruc.2023.136992
• [20] Kang Y., Xia Y., Wang H. et al.: Advanced Functional Materials 2019, 29(29), 1902014. https://doi.org/10.1002/adfm.201902014
• [21] Xing Y.L., Xu G.R., An Z.H. et al.: Separation and Purification Technology 2021, 259, 118192. https://doi.org/10.1016/j.seppur.2020.118192
• [22] Cheng L., Liu G., Zhao J. et al.: Accounts of Materials Research 2021, 2(2), 114. https://doi.org/10.1021/accountsmr.0c00092
• [23] Abdulkareem-Alsultan G., Asikin-Mijan N., Obeas L.K. et al.: Chemical Engineering Journal 2022, 429, 132206. https://doi.org/10.1016/j.cej.2021.132206
• [24] Wang X., Mao Y.F., Shen X. et al.: Separation and Purification Technology 2024, 329, 125216. https://doi.org/10.1016/j.seppur.2023.125216
• [25] Sun Z., Kong P., Gui H. et al.: Materials Today Chemistry 2024, 41, 102303. https://doi.org/10.1016/j.mtchem.2024.102303
• [26] Kamil F.H., Salmiaton A., Shahruzzaman R.M.H.R. et al.: Bulletin of Chemical Reaction Engineering and Catalysis 2017, 12(1), 81. https://doi.org/10.9767/bcrec.12.1.557.81-88
• [27] Thebo K.H., Qian X., Zhang Q. et al.: Nature Communications 2018, 9(1), 1486. https://doi.org/10.1038/s41467-018-03919-0
• [28] Alsultan A.G., Asikin Mijan N., Mansir N. et al.: ACS Omega 2021, 6(1), 408. https://doi.org/10.1021/acsomega.0c04800
• [29] Lv X.B., Xie R., Ji J.Y. et al.: Separation and Purification Technology 2024, 336, 126232. https://doi.org/10.1016/j.seppur.2023.126232
• [30] Wang Y., Ren L., Wang H. et al.: Chemical Engineering Journal 2024, 485, 149742. https://doi.org/10.1016/j.cej.2024.149742
• [31] Abdulkreem-Alsultan G., Islam A., Janaun J. et al.: Materials Letters 2016, 179, 57. https://doi.org/10.1016/j.matlet.2016.05.030
• [32] Qin K., Zheng Z., Wang et al.: Giant 2024, 19, 100317. https://doi.org/10.1016/j.giant.2024.100317
• [33] Oberlintner A., Shvalya V., Santhosh N.M. et al.: Carbohydrate Polymers 2024, 345, 122558. https://doi.org/10.1016/j.carbpol.2024.122558
• [34] Abdalla O., Rehman A., Nabeeh A. et al.: Membranes 2023, 13(7), 678. https://doi.org/10.3390/membranes13070678
• [35] Macedonio F., Alessandro F., Frappa M. et al.: “New applications of polymeric phase inversion mem¬branes” in “Polymeric Membrane Formation by Phase Inversion”, (editors: Tavajohi N., Khayet M.), Elsevier, Amsterdam 2024. p. 395. https://doi.org/10.1016/B978-0-323-95628-4.00017-3
• [36] Ghassan A.A., Mijan N.A., Taufiq-Yap Y.H.: “Nanomaterials: An Overview of Nanorods Synthesis and Optimization” in “Nanorods and Nanocomposites”, (editors: Ghamsari M.S., Dhara S.), Intertech Open, London 2020, p. 11.
• [37] Raja R.I., Rashid K.T., Toma M.A. et al.: Journal of Saudi Chemical Society 2024, 28(2), 101805. https://doi.org/10.1016/j.jscs.2023.101805
• [38] Lum M.M.X., Ng K.H., Lai S.Y. et al.: Process Safety and Environmental Protection 2023, 176, 580. https://doi.org/10.1016/j.psep.2023.06.035
• [39] Liu L., Wang Y., Liu Y. et al.: Environmental Pollution 2024, 347, 123750. https://doi.org/10.1016/j.envpol.2024.123750
• [40] Mansir N., Sidek H.M., Teo S.H. et al.: Bioresource Technology Reports 2022, 17, 100988. https://doi.org/10.1016/j.biteb.2022.100988
• [41] Elouahed S.K., Asikin-Mijan N., Alsultan A.G. et al.: Energy Conversion and Management 2024, 303, 118185. https://doi.org/10.1016/j.enconman.2024.118185
• [42] Shakhabutdinov S.S., Yugay S.M., Ashurov N.S. et al.: Eurasian Journal of Chemistry 2024, 49(2), 21. https://doi.org/10.31489/2959-0663/2-24-2
• [43] Mateu-Sanz M., Fuenteslópez C.V., Uribe-Gomez J. et al.: Trends in Biotechnology 2024, 42(4), 402. https://doi.org/10.1016/j.tibtech.2023.09.015
• [44] Pant B., Park M., Jang R.S. et al.: Carbon Letters 2017, 23, 17. https://doi.org/10.5714/CL.2017.23.017
• [45] He P., Yang M., Lei Y. et al.: Polymers 2023, 15(5), 1321. https://doi.org/10.3390/polym15051321
• [46] Karagoz S., Kiremitler N.B., Sarp G. et al.: ACS Applied Materials and Interfaces 2021, 13(4), 5678. https://doi.org/10.1021/acsami.0c15606
• [47] Alshabanah L.A., Omran N., Elwakil B.H. et al.: Polymers 2021, 13(22), 2987. https://doi.org/10.3390/polym13223987
• [48] de Faria A.F., Perreault F., Shaulsky E. et al.: ACS Applied Materials and Interfaces 2015, 7(23), 12751. https://doi.org/10.1021/acsami.5b01639
• [49] Lee K., Lee S.: Textile Research Journal 2015, 85(19), 1999. https://doi.org/10.1177/0040517515578325
• [50] Soltanolzakerin-Sorkhabi T., Fallahi-Samberan M., Kumaravel V.: Molecules 2023, 28(14), 5439. https://doi.org/10.3390/molecules28145439
• [51] Jin L., Zhou F., Wu S. et al.: Textile Research Journal 2022, 91(1-2), 3. https://doi.org/10.1177/0040517521993484
• [52] Yang Y., Zhang Z., Wan M. et al.: Polymers 2020, 12(11), 2486. https://doi.org/10.3390/polym12112486

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki (2025).