The Influence of the Model Selected Parameter Measurement Error on the Accuracy of Heat Transfer Coefficient Determination Method for Contact between Rolls and the Cast Strand

• Autorzy: Rywotycki M.

Identyfikatory

DOI

10.1515/amm-2016-0332

• Języki publikacji: EN

Abstrakty

EN

The paper presents a heat transfer model between two surfaces which are in contact under an external force. The developed heat transfer boundary condition model has been obtained using a new methodology for determining heat flux transferred between two solid surfaces. The methodology consists of two parts: experimental and numerical one. The experimental part involves measurements of temperature at specific points in two samples brought into contact. The numerical part uses an inverse method and the finite element method to calculate the heat flux at the interface.

Słowa kluczowe

EN

heat transfer; inverse solution; solid to solid interface

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 2061--2070
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Rywotycki M.

• AGH University of Science and Technology Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] A. Gołdasz, Z. Malinowski, T. Telejko, M. Rywotycki, A., Szajding. Archives of Metallurgy and Materials 57 (4), 1143-1149 (2012).
• [2] M. Hojny, M. Głowacki, Journal of Engineering Materials and Technology 133 (2), 021008-1-021008-7 (2011).
• [3] J. Falkus, K. Miłkowska-Piszczek, Materiali in Tehnologije 49 (6), 903-912 (2015).
• [4] Z. Malinowski, J. G. Lenard, M. E. Davies, Journal Of Materials Processing Technology 41 (2), 125-142 (1994).
• [5] L. Galdos, E. Saenz de Argandona, J. Mendiguren, R. Ortubay, X. Agirretxe, J. M. Martin, Computer Methods in Materials Science 15 (1), 58-64 (2015).
• [6] M. Rosochowska, K. Chodnikiewicz, R. Balendra, Journal of Materials Processing Technology 145, 207-214 (2004).
• [7] M. Rosochowska, R. Balendra, K. Chodnikiewicz, Journal of Materials Processing Technology 135, 204-210 (2003).
• [8] C. C. Chang, A. N. Bramley, Proceedings of the Institution of Mechanical Engineers 216 (8), 1179-1186 (2002).
• [9] P. Salomonsson, M. Oldenburg, P. Åkerström, G. Bergman, Steel Research Int. 80 (11), 841-845 (2009).
• [10] M. Krzyzanowski, J.H. Beynon, Materials Science and Technology, (2015), DOI 10.1179/1743284715Y.0000000125.
• [11] Y. Meng, B. G. Thomas, Metallurgical and Materials Transactions B 34 B (5), 685-705 (2003)
• [12] J. Falkus (Ed.), Modelling of continuous casting process of steel; 2012 Radom: Wydawnictwo Naukowe Instytutu Technologii Eksploatacji – Państwowy Instytut Badawczy.
• [13] M. Rywotycki, Z. Malinowski, A. Szajding, K. Sołek, J. Falkus, K. Miłkowska-Piszczek NHT 2015 : Numerical Heat Transfer 2015 – Eurotherm seminar no. 109 : 27-30 September, Warsaw, Poland 93-94 (2015)
• [14] Z. Malinowski, T. Telejko, B. Hadała, A. Cebo-Rudnicka, A. Szajding, International Journal of Heat and Mass Transfer 75, 347-361 (2014).
• [15] Z. Malinowski, Numeryczne modele w przeróbce plastycznej i wymianie ciepła. AGH UWN-D, Kraków, (2005).

Uwagi

EN

The study was performed as part of the regular activity of the AGH University of Science and Technology. Faculty of Metals Engineering and Industrial Computer Science. Work No. 11.11.110.226.