Identification of factors affecting the strength of joints in steel-titanium-aluminium composites in monotonic peel tests

• Autorzy: Kurek Amadeusz , Kowalski Mateusz , Rozumek Dariusz

Identyfikatory

DOI

10.17729/ebis.2020.3/10

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of strength tests (ram test) of two types of three-layer material made using the explosion welding technology. Clad materials used in the test differed in the overlay layer (A1050 and A3003). The results were analysed for factors affecting the obtained level of joint strength.

Słowa kluczowe

EN

explosive welding technology; steel-titanium-aluminium composites

PL

zgrzewanie wybuchowe; kompozyty stal-tytan-aluminium

• Wydawca: Sieć Badawcza Łukasiewicz - Górnośląski Instytut Technologiczny
• Czasopismo: Biuletyn Instytutu Spawalnictwa w Gliwicach
• Rocznik: 2020
• Tom: Vol. 64, No. 3
• Strony: 99--104
• Opis fizyczny: Bibliogr. 10 poz., tab., rys.

Twórcy

autor

Kurek Amadeusz

• Opole University of Technology
• EXPLOMET High-Power Technologies Company Gałka, Szulc, registered partnership

autor

Kowalski Mateusz

• Opole University of Technology

autor

Rozumek Dariusz

• Opole University of Technology

Bibliografia

• [1] Findik F.: Recent developments in explosive welding. Materials & Design, 2011, vol. 32, no. 3, pp. 1081–1093, doi: 10.1016/j.matdes.2010.10.017.
• [2] Kaya Y., Kahraman N.: An investigation into the explosive welding/cladding of Grade A ship steel/AISI 316L austenitic stainless steel”. Materials & Design (1980-2015), 2013, vol. 52, pp. 367–372, , doi: 10.1016/j.matdes.2013.05.033.
• [3] Kr T., Gt L.: Explosion-bonded transition joints for structural applications”, Construction and Building Materials, 1989, vol. 3, no. 2, pp. 64–72, doi: 10.1016/S0950-0618(89)80002-9.
• [4] Akbari Mousavi S. A. A., Farhadi Sartangi P.: Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel. Materials & Design, 2009, vol. 30, no. 3, pp. 459–468, doi: 10.1016/j.matdes.2008.06.016.
• [5] Barnat W.: Experimental and numerical study of influence of incidence angle of shock wave created by explosive charge on the steel plate. Bulletin of the Polish Academy of Sciences. Technical Sciences, 2014, vol. 62, no. 1, pp. 151–163, doi: 10.2478/bpasts-2014-0017.
• [6] Banker J., Nobili A.: Aluminum-Steel Electric Transition Joints, Effects of Temperature and Time upon Mechanical Properties, presented at 131 TMS Annual Meeting, Seattle,WA.
• [7] Čižek L., Ostroushko D., Szulc Z., Molak R., Pramowski M.: Properties of sandwich metals joined by explosive cladding method. Archives of Materials Science and Engineering ,2010, vol. 43, no. 1, pp. 21-29.
• [8] Kahraman N., Gulenc B., i Findik F.: Corrosion and mechanical-microstructural aspects of dissimilar joints of Ti–6Al–4V and Al plates. International Journal of Impact Engineering, 2007, vol. 34, no. 8, pp. 1423-1432, doi: 10.1016/j.ijimpeng.2006.08.003.
• [9] ABS Rules For Materials And Welding – Aluminum And Fiber Reinforced Plastics (Frp). American Bureau of Shipping, Huston, Part 2, 2017.
• [10] ABS Guide For Fatigue Assessment Of Offshore Structures. American Bureau of Shipping, Huston, 2014.