Analysis of Horizontal Well Operation at the Zhanazhol Deposit

• Autorzy: Aldamzharov N. , Akhmetzhan S. , Churikova L. , Aitaliyev Y. , Gumarov G. , Mameshov R. , Konasheva Y.

Identyfikatory

DOI

10.12911/22998993/78750

• Języki publikacji: EN

Abstrakty

EN

The need for accelerated economic growth sets the task of increasing efficiency and improving the quality of drilling for the oil industry. This task includes both quantitative growth, i.e. an increase in the speed of drilling, and improvement of the quality of drilling operations themselves. One of the most important factors of quality improvement is the drilling of directional and, particularly, horizontal wells strictly according to the project. This paper provides a brief analysis of the operation of horizontal wells at the Zhanazhol deposit. It also presents studies on the statistics of the effective length of horizontal well sections.

Słowa kluczowe

EN

bottomhole; section drilling; directional wells; oil and gas industry

• Wydawca: Polskie Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology
• Czasopismo: Journal of Ecological Engineering
• Rocznik: 2018
• Tom: Vol. 19, nr 1
• Strony: 25--32
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Aldamzharov N.

• LLP “Technopark Zerek”, Aktobe, Brothers Zhubanovy Str., 302/a, Republic of Kazakhstan

autor

Akhmetzhan S.

• Kazakhstan University of Innovative and Telecommunication Systems, Uralsk, Republic of Kazakhstan

autor

Churikova L.

• West Kazakhstan Agrarian Technical University, Uralsk, Republic of Kazakhstan

autor

Aitaliyev Y.

• West Kazakhstan State University, Uralsk, Republic of Kazakhstan

autor

Gumarov G.

• West Kazakhstan State University, Uralsk, Republic of Kazakhstan

autor

Mameshov R.

• Kazakhstan University of Innovative and Telecommunication Systems, Uralsk, Republic of Kazakhstan

autor

Konasheva Y.

• West Kazakhstan Agrarian Technical University, Uralsk, Republic of Kazakhstan

Bibliografia

• 1. Aldamzharov N.N. 2001. Construction of horizontal wells at the Zhanazhol deposit. V International Symposium on Drilling Wells in Complicated Conditions, St. Petersburg, 11–15 June 2001, 5–6.
• 2. Aldamzharov N.N. 2003. Design of the technology of multilateral wells at the Zhanazhol deposit. Oil and Gas Business, Aktobe, pp. 189.
• 3. Aliyev Z.S. et al. 2001. The rationale and choice of the optimal design of horizontal gas wells. Moscow, pp. 51.
• 4. Basniyev K.S. and Aliyev Z.S. 1999. Methods for calculating the flow rates of horizontal, directional and multihole gas wells. Moscow.
• 5. Churnykh V.V. 1999. Evaluation of the productivity of multilateral wells in various sidetracking schemes. Moscow, RSU of Oil and Gas – Neftyanoye Khozyaystvo, 9.
• 6. Creation and implementation of a multifunctional technological complex for the construction of directional and horizontal holes. 2000. “OAO NPO Drilling Engineering” – VNIIBT. Moscow, pp. 48.
• 7. Eliyashevsky I.V. et al. 1982. Typical tasks and calculations in drilling. 2nd ed. Moscow, Nedra.
• 8. Grigoryan A.M. 1969. Reservoir drilling by multihole and horizontal wells. Moscow: Nedra, pp. 123.
• 9. Grigoryan A.M. 1998. Multilateral wells are the near future of the oil industry. Moscow: Neftyanoye Khozyaystvo, 11, 2–12.
• 10. Instruction for directional well drilling. 1966. Moscow: VNIIBT, 31, pp. 174.
• 11. Kuliyev Yu.M. 1986. Improving the technology of directional well drilling by developing and implementing a rational profile of effective bottomhole assembly. Doctoral dissertation. Baku. Azerbaijan State Oil and Industrial University, pp. 165.
• 12. Nikitin B.A. el al. 1999. Determination of the productivity of horizontal gas wells and reservoir parameters from the results of hydrodynamic studies at stationary modes. Moscow, OAO Gazprom.
• 13. Oganov A.S. et al. 1999. Current state and prospects for drilling directional and horizontal wells with large hole deviations from the vertical. Moscow, OAO VNIIOENG, pp. 35.
• 14. Oganov A.S. et al. 2001. Multihole well drilling: Development, problems and successes. Moscow, OAO VNIIOENG, pp. 4–31.
• 15. Oganov G.S. 1999. On the issue of choosing the type of wells and the methods of underreaming of the oil and gas deposit. OAO NPO “Drilling Engineering”. Moscow, Scientific and Technical Journal, 10, 32.
• 16. Oganov S.A. Gasanov I.Z., Kuliyev Yu.M. and Tsybulsky I.S. 1979. Determination of the diameter and length of the stabilizer to ensure conditions to prevent its touching the upper side of hole. Scientific works of Azerbaijan State Oil and Industrial University, 3, 21–23.
• 17. Shamanov S.A. 2001. Drilling and completion of horizontal wells. Moscow, LLC “Nedra – Biznestsentr”.
• 18. Technology “TOBUS”. 1997. Moscow.
• 19. Woods G. and Lubinski A. 1960. Well deviation during drilling. Trans. from English. Moscow: Gostoptekhizdat, pp. 161.
• 20. Zainullin A.I. 1995. Forecasting of optimal parameters for oil horizontal wells. Moscow, VNIIOENG, Drilling of wells onshore and offshore, 10, 61.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).