Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing – Preliminary Study

• Autorzy: Klik Przemysław , Cisowski Adam , Rządkowski Witold , Pyrzanowski Paweł , Kowalik Michał
• Języki publikacji: EN

Abstrakty

EN

3D concrete printing (3DCP) technology is a rapidly developing and promising technique for creating concrete structures. One of the main challenges of the 3DCP technology is the method of reinforcement, which should be integrated with the automated printing process, while maintaining the best mechanical properties important for the strength of the structure. The main reason to undertake the subject is low degree of automation in construction industry, which results in high cost of human labour, as well as high rate of accidents in process. The article proposes a technology for automatic reinforcement of concrete structures with glass fibres and epoxy resin. Maximum bending force tests of beams reinforced with the proposed method were carried out and compared with beams reinforced with commonly used methods. Although not being a article focused on DIC analysis, few images were presented to compare behaviour of non-reinforced beam with automatically reinforced one and to show cracking propagation of a chosen automatically reinforced beam. The proposed method of reinforcement in the 3DCP process enables full automation and constructions with high bending strength, simultaneously reducing the level of risk involved in conventional construction industry.

Słowa kluczowe

EN

3D concrete printing; concrete reinforcement; automatic reinforcement; continuous fibre reinforcement

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2024
• Tom: Vol. 18, no 5
• Opis fizyczny: Bibliogr.

Twórcy

autor

Klik Przemysław

• Institute of Aeronautics and Applied Mechanics (IAAM), Warsaw University of Technology

• https://orcid.org//0000-0001-9783-5597

autor

Cisowski Adam

• Institute of Aeronautics and Applied Mechanics (IAAM), Warsaw University of Technology

• https://orcid.org/0000-0003-4066-6598

autor

Rządkowski Witold

• Institute of Aeronautics and Applied Mechanics (IAAM), Warsaw University of Technology

• https://orcid.org/0000-0002-8586-2966

autor

Pyrzanowski Paweł

• Institute of Aeronautics and Applied Mechanics (IAAM), Warsaw University of Technology

• https://orcid.org/0000-0003-1015-7645

autor

Kowalik Michał

• Institute of Aeronautics and Applied Mechanics (IAAM), Warsaw University of Technology

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).