Computer Simulation of the Relationship between Selected Properties of PVD Coatings

• Autorzy: Śliwa A. , Kwaśny W. , Sitek W. , Bonek M.

Identyfikatory

DOI

10.1515/amm-2016-0084

• Języki publikacji: EN

Abstrakty

EN

The possibility to apply the Finite Element Method to calculate internal stresses which occur in Ti+TiN, Ti+Ti(C_xN_1-x) and Ti+TiC coatings obtained in the magnetron PVD process on the sintered high-speed steel of the PM HS6-5-3-8 type. For the purpose of computer simulation of internal stresses in coatings with the use of MES, the correct model of analyzed specimens was worked out and then it was experimentally verified by comparison of calculation results with the results of computer simulation. Accurate analysis of correlations indicated especially strong dependence between internal stresses and microhardness and between microhardness and erosion resistance what created conditions for establishing the dependence between internal stresses obtained in the result of computer simulation and erosion resistance as basic functional quality of coating. It has essential practical meaning because it allows to estimate predictable erosion resistance of coating exclusively on the base of the results of computer simulation for used parameters in the process of coating manufacturing.

Słowa kluczowe

EN

numerical techniques; stresses; microhardness; computer simulation; finite element method

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 481--484
• Opis fizyczny: Bibliogr. 18 poz., rys.

Twórcy

autor

Śliwa A.

• Silesian University of Technology, Division of Materials Processing Technology and Computer Techniques in Materials Science, Institute of Engineering Materials and Bio Materials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Kwaśny W.

• Silesian University of Technology, Division of Materials Processing Technology and Computer Techniques in Materials Science, Institute of Engineering Materials and Bio Materials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Sitek W.

• Silesian University of Technology, Division of Materials Processing Technology and Computer Techniques in Materials Science, Institute of Engineering Materials and Bio Materials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Bonek M.

• Silesian University of Technology, Division of Materials Processing Technology and Computer Techniques in Materials Science, Institute of Engineering Materials and Bio Materials, 18a Konarskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] A. Zieliński, G. Golański, M. Sroka, P. Skupień, Materials at High Temperatures (2016), DOI : 10.1080/09603409.2016.1139306.
• [2] W. Sitek, L. A. Dobrzański, Journal of Materials Processing Technology 164, 1607-1611 (2005).
• [3] W. Sitek, L. A. Dobrzański, J. Zaclona, Journal of Materials Processing Technology 157, 245-249 (2004).
• [4] Ł. Szparaga, J. Ratajski, Inżynieria Materiałowa 32, 760-763 (2011).
• [5] Ł. Szparaga, J. Ratajski, A. Zarychta, Archives of Materials Science and Engineering 48, 33-39 (2011).
• [6] Ł. Szparaga, J. Ratajski, Advances in materials science 14, (2014).
• [7] W. Sitek, L. A. Dobrzański, Journal of Materials Processing Technology 64, 117-126 (1995).
• [8] W. Sitek, L. A. Dobrzański, M. Krupiński M, Journal of Materials Processing Technology 157, 102-106 (2004).
• [9] W. Sitek, Transactions of Famena 34, 39-46 (2010).
• [10] W. Sitek, J. Trzaska, L. A. Dobrzański, Materials Science Forum 575, 892-897 (2008).
• [11] A. Śliwa, J. Mikula, K. Golombek, T. Tanski, W. Kwasny, M. Bonek, Z. Brytan, Applied Surface Science, (2016), DOI 10.1016/j.apsusc.2016.01.090.
• [12] M. Bonek, A. Śliwa, J. Mikuła, Applied Surface Science, (2016), DOI 10.1016/j.apsusc.2016.01.256.
• [13] L. A. Dobrzański, A. Śliwa, W. Kwasny, Journal of Materials Processing Technology 164-165, 1192-1196 (2005)
• [14] L. A. Dobrzanski, D. Pakula, J. Mikula, K. Golombek, International Journal of Surface Science and Engineering 1, 111-124 (2007).
• [15] A. Zieliński, G. Golański, M. Sroka, Kovove Materialy 54, (1), 61-70 (2016).
• [16] L. A. Dobrzanski, M. Staszuk, K. Gołombek, A. Śliwa, M. Pancielejko, Archives of Metallurgy and Materials 55, 187-193 (2010).
• [17] T. Tański, K. Labisz, K. Lukaszkowicz, A. Śliwa, K. Gołombek, Surface Engineering 30, 927-932 (2014).
• [18] A. Zieliński, M. Miczka, M. Sroka, Materials Science and Technology (2016), DOI :10.1080/02670836.2016.1150242.