Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
OBJECTIVES: Development of movement model of fighting tracked vehicle to study oscillatory processes that cause a dynamic load on the driver’s workplace and imitate real conditions of fighting tracked vehicle’s movement to develop technical requirements for dynamic simulators with the achievement of high degree of their compliance with the real vehicle. Research hypothesis. Use of the improved mobility platform of dynamic simulators, realizing the conditions as close as possible to conditions of driving a real fighting tracked vehicle. METHODS: The presented views are the result of empirical research based on the general scheme of forces acting on a fighting tracked vehicle and allow to theoretically estimate the dynamic load of mechanic-driver's workplace. RESULTS: In the study, the author developed an improved model of the movement of a fighting tracked vehicle, which describes the spatial movement of its body in motion on the support surface of a complex profile and allows to estimate theoretically the dynamic workload of the driver’s workplace, which provides a basic design of a dynamic platform in six degrees of freedom and will provide to develop the requirements for the modernization of dynamic simulators. CONCLUSIONS: When performing combat tasks mechanic-driver of FTV is exposed to the effects of spatial movements of different nature. The mechanic-driver during the movement of FTV feels a wide range of influences that are caused by the interaction of the tracked running gear (TRG) with the bearing surface and change the direction of movement of FTV.
Czasopismo
Rocznik
Tom
Strony
13--25
Opis fizyczny
Bibliogr. 12 poz., rys.
Twórcy
autor
- Odessa Military Academy, 10 Fontanskaya Road, Odessa, Ukraine
Bibliografia
- [1] Bilichenko, V. et al. (2014) ‘Analysis of approaches to the classification of motor cycles for training drivers’, Naukovi notatky, 46, pp. 29–37.
- [2] Casas, S. et al. (2014) ‘Towards an extensible simulator of real motion platforms’, Simulation Modelling Practice and Theory, 45, pp. 50–61. doi: 10.1016/j.simpat.2014.03.011.
- [3] Dagdelen, M. et al. (2009) ‘Model-based predictive motion cueing strategy for vehicle driving simulators’, Control Engineering Practice, 17(9), pp. 995–1003. doi: 10.1016/j.conengprac.2009.03.002.
- [4] Heydinger, G. et al. (2002) ‘Vehicle dynamics modelling for the national advanced driving simulator’, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216(4), pp. 307–318. doi: 10.1243/0954407021529138.
- [5] Huang, A. R. W. et al. (2003) ‘A low-cost driving simulator for full vehicle dynamics simulation’, IEEE Transactions on Vehicular Technology, 52(1), pp. 162–172. doi: 10.1109/TVT.2002.807157.
- [6] Ivankina, O. P. et al. (1977) Dynamic model of a potato harvester. Russian State Agricultural Academy.
- [7] Izdelie TTV-765/675 (1988) Technical Specifications. Murom.
- [8] Lomov, E. F. (1971) Engineering psychology as applied to equipment design. Mashinostroenie.
- [9] Nehaoua, L. et al. (2008) ‘Design and control of a small-clearance driving simulator’, IEEE Transactions on Vehicular Technology, 57(2), pp. 736–746. doi: 10.1109/TVT.2007.905336.
- [10] Oskarsson, P. et al. (2012) ‘Training effects in a low fidelity combat vehicle simulator’, Proceedings of the Human Factors and Ergonomics Society Annual Meetings, 56(2), pp. 1566–1570. doi: 10.1177/1071181312561312.
- [11] Toffin, D. et al. (2007) ‘Role of steering wheel feedback on driver performance: Driving simulator and modeling analysis’, Vehicle System Dynamics, 45(4), pp. 375–388. doi: 10.1080/00423110601058874.
- [12] Wong, J. Y. (1982) The Theory of Land Vehicles (third edition). John Wiley & Sons Inc.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-57a88ee9-7214-49ef-bb89-72e4738dc344