Method for determining the parameters of surface roughness by usage of a 3D scanner

• Autorzy: Siewczyńska M.
• Języki publikacji: EN

Abstrakty

EN

Appropriate methods and parameters best describing the surface roughness are searched for. Concrete is a heterogeneous material and various types of damage and surface cleaning cause an increase of the roughness. Surface roughness depends i.a. on the quality and method of cleaning used. Mapping the shape of the profile is usually performed using profilografs. Description of surface roughness is usually expressed via standards parameters or fractografic parameters that must be determined using the cycloid grid imposed on selected images of surface profiles. This method is approximate. Described in this article is a new method for measuring shapes which can be applied for any area (not just concrete), and most importantly, gives information about the roughness of the entire surface in an accurate manner. The calculations are made directly from geometric measurements of the whole surface, and not based on averaging the results of the selected profiles. The method uses a 3D scanner and CAD capabilities available in research centers or freeware programs.

Słowa kluczowe

EN

surface roughness; 3D scanner; sandblasted concrete surface; RS; RL

PL

chropowatość powierzchni; skaner 3D; piaskowanie powierzchni; beton

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2012
• Tom: Vol. 12, no. 1
• Strony: 83--93
• Opis fizyczny: Bibliogr. 12 poz., rys., wykr.

Twórcy

autor

Siewczyńska M.

• Poznan University of Technology, Piotrowo 5, 61-138 Poznan, Poland

Bibliografia

• [1] T. Błaszczynski, J. Jasiczak, B. Ksit, M. Siewczynska, Aspects of bond layer role in concrete repairs, Archives of Civil and Mechanical Engineering 6 (4) (2006) 73–85.
• [2] Z. Kamaitis, Modelling of corrosion protection for reinforced concrete structures with surface coatings, Journal of Civil Engineering and Management 14 (4) (2008) 241–249 (s.).
• [3] P. Paczynski, Technical Metrology, Wydawnictwo Politechniki Poznanskiej, Poznan , 2003 (in Polish).
• [4] PN-87/M-04256/02 Geometrical Structure of the Surface, Surface Roughness, General Terminology (in Polish).
• [5] G. Prokopski, Fracture Mechanics of Concrete Cement, Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszow, 2007 (in Polish).
• [6] M. Siewczynska, Influence of selected parameters on the adhesion of concrete coatings, Dissertation, Politechnika Poznanska, Poznan, 2008 (in Polish).
• [7] M. Siewczynska, New method of calculation of surface roughness parameters, in: M. Kaminski, J. Jasiczak, W. Buczkowski, T. Błaszczynski (Eds.), Modern Repair Methods in Building and Constructions, Dolnosląskie Wydawnictwo Edukacyjne, Wrocław, 2009, pp. 77–86.
• [8] A. Garbacz, Non-Destructive Investigations of Polymer–Concrete Composites with Stress Waves Repair Efficiency Evaluation, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa, 2007 (in Polish).
• [9] J. Hoła, K. Schabowicz, State-of-the-art non-destructive methods for diagnostic testing of building structures anticipated development trends, Archives of Civil and Mechanical Engineering 10 (3) (2010) 5–18.
• [10] Materials from webpage: www.ita-polska.com.pl
• [11] Materials from webpage: www.gom.com
• [12] A. Pikon, AutoCAD 2002, Helion, Gliwice, 2001 (in Polish).