Simulation features of the impeller in a centrifugal pump

• Autorzy: Mykhailiuk Vasyl , Fafaley Oleh , Deynega Ruslan , Mosora Yurii

Identyfikatory

DOI

10.32056/KOMAG2022.1.1

• Języki publikacji: EN

Abstrakty

EN

To ensure the operability of machinery and equipment for the oil and gas industry, it is important to study their operation with subsequent improvement. This scientific work is devoted to highlighting the operation simulation of the impeller in a submersible centrifugal pump, because the pump itself is the main equipment in oil production. The main parts of a submersible centrifugal pump are its stages, consisting of an impeller and a guide vane. When the impeller rotates, a force interaction of the flow with the impeller blades occurs, while a pressure difference in the fluid flow on both sides of each blade arises. The pressure forces of the blades on the flow create a forced rotational and translational motion of the fluid, increasing its mechanical energy. It should be noted that the movement of fluid in pump sections is a rather complex process that is difficult to accurately describe analytically. However, today there are various computer programs (SOLIDWORKS FlowSimulation, ANSYS CFD, etc.) based on the finite volume method (FVM). To study the operation of a submersible centrifugal pump impeller, there has been built its threedimensional model. As a result of calculations, the distribution of pressure and velocity in the cross section of the impeller was obtained.

Słowa kluczowe

EN

impeller; pressure; simulation; speed; submersible centrifugal pump

• Wydawca: Instytut Techniki Górniczej KOMAG
• Czasopismo: Mining Machines
• Rocznik: 2022
• Tom: vol. 40, iss. 1
• Strony: 1--7
• Opis fizyczny: Bibliogr. 11 poz., rys.

Twórcy

autor

Mykhailiuk Vasyl

• Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska st., 76019, Ukraine

autor

Fafaley Oleh

• Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska st., 76019, Ukraine

autor

Deynega Ruslan

• Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska st., 76019, Ukraine

autor

Mosora Yurii

• Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska st., 76019, Ukraine

Bibliografia

• [1] Barmaki R., Ehghaghi M. B.: Experimental investigation of a centrifugal pump hydraulic performance in hydraulic transmission of solids. Mechanics and Mechanical Engineering, 2019, 23(1), 259-270. DOI: 10.2478/mme-2019-0035
• [2] Rozhkova L., Krenicky T., Kuznetsov E., Nahornyi V.: Blades Interaction and Non-Stationarity of Flow in Vertical-Axial Wind Turbines. Management Systems in Production Engineering, 2021, Volume 29, Issue 4. pp. 280-286. DOI: 10.2478/mspe-2021-0035
• [3] Nikitin Y., Bozek P., Turygin A.: Vibration diagnostics of spiroid gear. Management Systems in Production Engineering. 2022, Volume 30, Issue 1. pp. 3-13. DOI: 10.2478/mspe-2022-0009
• [4] Kontsur I.F., Livak I.D.: Hidromashyny i kompresory. Konspekt lektsii. Ivano-Frankivsk: Fakel, 2004, p. 133 [In Ukrainian]
• [5] Mykhailiuk V. V.: Hidromashyny: atlas skhem ta konstruktsii / Mykhailiuk V. V., Kontsur I. F., Deineha R. O.; Ivano-Frankivsk : IFNTUNH, 2015. - 30 p. [In Ukrainian]
• [6] Kang C. Li Y.: The effect of twin volutes on the flow and radial hydraulic force production in a submersible centrifugal pump. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2015, 229(2), pp. 221-237. DOI 10.1177/0957650914562920
• [7] Kostryba I.V., Shostakivskyi I.I., Burda M.Y.: Burove i naftohazopromyslove obladnannia. Atlas tekhnolohichnykh skhem ta konstruktsii. – Kyiv: Lohos, 2001. [In Ukrainian].
• [8] Fedorovych Ya. T., Liakh M. M., Mykhailiuk V. V., Deineha R. O., Koval B. I.: Simulation of wear of the Christmas tree choke elements. Scientific Bulletin of Ivano-Frankivsk National Technical University of Oil and Gas, 2019, 1(46), pp. 53–61. DOI: 10.31471/1993-9965-2019-1(46)-53-61 [In Ukrainian]
• [9] Dzhus A., Romanyshyn L., Mykhailiuk V., Mosora Y.: The use of simulation modeling in the design of elements of annular preventers / New Trends in Production Engineering. MONOGRAPH. 2019, pp. 295-303. DOI: 10.2478/ntpe-2019-0031
• [10] Shah, S. R., et al.: CFD for centrifugal pumps: a review of the state-of-the-art. Procedia Engineering, 2013, vol. 51, pp. 715-720
• [11] Byskov R. K., Jacobsen C. B., Pedersen N.: Flow in a centrifugal pump impeller at design and off-design conditions—part II: large eddy simulations. J. Fluids Eng., 2003, 125(1), 73-83. DOI: 10.1115/1.1524586

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu „Społeczna odpowiedzialność nauki” - moduł: Popularyzacja nauki i promocja sportu (2022-2023)