The effect of the feed speed and rotation speed of plane milling on the surface roughness of beech wood

• Autorzy: Pinkowski G. , Szymański W. , Krauss A. , Stefanowski S.
• Języki publikacji: EN

Abstrakty

EN

The paper presents studies on the effect of feed speed and spindle rotation speed on the milled surface of beech wood worked on a milling machine. In this study eight feed speed variants and five spindle rotation speed variants were tested. The analyses focused on roughness characteristics of milled surface and detailed visual (organoleptic) analyses were conducted. A statistically significant effect of feed speed and spindle rotation speed was observed. Advantageous ranges of beech wood cutting parameters were determined for practical application in milling operations.

Słowa kluczowe

EN

milling; surface roughness; feeding speed; rotation speed; beech wood

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2018
• Tom: No. 103
• Strony: 5--12
• Opis fizyczny: Bibliogr. 20 poz.

Twórcy

autor

Pinkowski G.

• Poznań University of Life Science, Department of Woodworking Machinery and Basis of Machine Construction

autor

Szymański W.

• Department of Woodworking Machinery and Fundamentals of Machine Construction, Poznań University of Life Sciences

autor

Krauss A.

• Department of Woodworking Machinery and Fundamentals of Machine Construction, Poznań University of Life Sciences

autor

Stefanowski S.

• Poznań University of Life Science, Department of Woodworking Machinery and Basis of Machine Construction

Bibliografia

• 1. AGUILERA A., ROLLERI A., BURGOS F., 2016: Cutting distance as factor toevaluate the quality of wood machined surfaces: A preliminary study, Maderas.Ciencia Y Tecnología nr 18 (1): s. 03-18. DOI: 10.4067/S0718-221X2016005000001.
• 2. AYDIN I., COLAKOGLU G., 2005: Effects of surface inactivation, high temperaturedrying and preservative treatment on surface roughness and colour of alder and beechwood, Applied Surface Science nr 252 (2), s. 430-440.DOI:10.1016/j.apsusc.2005.01.022.
• 3. BENDIKIENE R., KETURAKIS G., 2016: The effect of tool wear and planningparameters on birch wood surface roughness, Wood Research nr 61(5) s. 791-798.
• 4. BUDAKÇI M., İLÇE A. C., GÜRLEYEN T., UTAR M., 2013: Determination of thesurface roughness of heat-treated wood materials planed by the cutters of a horizontalmilling machine, BioResources nr 8(3), s. 3189–3199. DOI:10.15376/biores.8.3.3189-3199.
• 5. GILEWICZ A., WARCHOLIŃSKI B., MYSLIŃSKI P., SZYMAŃSKI W., 2010:Anti-wear multilayer coatings based on chromium nitride for wood machining tools,Wear nr 270 (1), s. 32-38. DOI: 10.1016/j.wear.2010.09.002.
• 6. GÜNDÜZ G., KORKUT S., KORKUT D. S. 2008: The effects of heat treatment onphysical and technological properties and surface roughness of Camiyanı Black Pine(Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood, Bioresource Technology nr99(7), s. 2275-2280. DOI:10.1016/j.biortech.2007.05.015.
• 7. HERNÁNDEZ R. E., COOL J. (2008): Effects of cutting parameters on surfacequality of paper birch wood machined across the grain with two planing techniques,Holz Als Roh-Und Werkstoff nr 66 (2), s. 147–154. DOI: 10.1007/s00107-007-0222-4.
• 8. ISO 4287:1997. Geometrical product specifications (GPS) - Surface texture: Profilemethod - Terms, definitions and surface texture parameters. International Organizationfor Standardization, Geneva, Switzerland.
• 9. KETURAKIS G., JUODEIKIENĖ I., 2007: Investigation of milled wood surfaceroughness, Technologija nr 13, s. 47-51.
• 10. KILIC M., HIZIROGLU S., BURDURLU E. 2006: Effect of machining on surfaceroughness of wood, Building and Environment nr 41(8), s. 1074-1078.DOI:10.1016/j.buildenv.2005.05.008.
• 11. KMINIAK R., GAFF M. 2015: Roughness of Surface Created by Transversal Sawingof Spruce, Beech, and Oak Wood, BioResources nr 10(2), s. 2873-2887. DOI:10.15376/biores.10.2.2873-2887..
• 12. KOZAKIEWICZ P. 2006: Fizyka drewna w teorii i zadaniach: wybrane zagadnienia.Wydawnictwo SGGW.12.
• 13. KVIETKOVÁ M., GAFF M., GAŠPARÍK M., KAPLAN L., BARCÍK Š. 2015a:Surface quality of milled birch wood after thermal treatment at various temperatures,BioResources nr 10(4), s. 6512-6521. DOI: 10.15376/biores.10.4.6512-6521.
• 14. KVIETKOVÁ M., GAŠPARÍK M., GAFF M. 2015b: Effect of thermal treatment onsurface quality of beech wood after plane milling, BioResources nr 10(3), s. 4226- 4238 DOI: 10.15376/biores.10.3.4226-4238.
• 15. Leitz 2017: Leitz – Lexicon. (accessed: 03.14.2017). Available from:http://www.leitz.org/lexikon-produktseiten.html.
• 16. MALKOÇOĞLU A. 2007: Machining properties and surface roughness of variouswood species planed in different conditions, Building and Environment nr 42(7), s.2562-2567. DOI:10.1016/j.buildenv.2006.08.028.
• 17. PINKOWSKI G., KRAUSS A., PIERNIK M., SZYMAŃSKI W. 2016: Effect ofthermal treatment on the surface roughness of scots pine (Pinus sylvestris L.) woodafter plane milling, BioResources nr 11(2), s. 5181–5189. DOI: 10.15376/biores.11.2.5181-5189.
• 18. PINKOWSKI G., SZYMAŃSKI W., GILEWICZ A., WARCHOLIŃSKI B. 2011:Surface roughness of beechwood following milling using modified cutters. Ann.Warsaw Univ. Life Sci.-SGGW For. Wood Technol nr 75, s. 210-215.
• 19. SOFUOǦLU S. D., KURTOĞLU A. 2015: Effects of machining conditions onsurface roughness in planing and sanding of solid wood, Drvna Industrija nr 66(4), s.265-272. DOI: 10.5552/drind.2015.1406.
• 20. SOGUTLU C. 2010: The effect of the feeding direction and feeding speed of planingon the surface roughness of Oriental beech and Scotch pine woods, Wood Research nr55(4), s. 67-78.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).