PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Residual generator fuzzy identification for automotive diesel engine fault diagnosis

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Safety in dynamic processes is a concern of rising importance, especially if people would be endangered by serious system failure. Moreover, as the control devices which are now exploited to improve the overall performance of processes include both sophisticated control strategies and complex hardware (input-output sensors, actuators, components and processing units), there is an increased probability of faults. As a direct consequence of this, automatic supervision systems should be taken into account to diagnose malfunctions as early as possible. One of the most promising methods for solving this problem relies on the analytical redundancy approach, in which residual signals are generated. If a fault occurs, these residual signals are used to diagnose the malfunction. This paper is focused on fuzzy identification oriented to the design of a bank of fuzzy estimators for fault detection and isolation. The problem is treated in its different aspects covering the model structure, the parameter identification method, the residual generation technique, and the fault diagnosis strategy. The case study of a real diesel engine is considered in order to demonstrate the effectiveness the proposed methodology.
Rocznik
Strony
419--438
Opis fizyczny
Bibliogr. 27 poz., rys., tab., wykr.
Twórcy
autor
  • Department of Engineering, University of Ferrara, Via Saragat 1E, 44124 Ferrara (FE), Italy
Bibliografia
  • [1] Babuška, R. (1998). Fuzzy Modeling for Control, Kluwer Academic Publishers, Boston, MA.
  • [2] Babuška, R. (2000). Fuzzy Modelling and Identification Toolbox, Version 3.1, Control Engineering Laboratory, Faculty of Information Technology and Systems, Delft University of Technology, Delft, http://lcewww.et.tudelft.nl/˜babuska.
  • [3] Bonfè, M., Castaldi, P., Mimmo, N. and Simani, S. (2011). Active fault tolerant control of nonlinear systems: The cart-pole example, International Journal of Applied Mathematics and Computer Science 21(3): 441–455, DOI: 10.2478/v10006-011-0033-y.
  • [4] Bosch, R. (2006). Diesel-Engine Management, 4 Edn., Wiley, Weinheim.
  • [5] Chen, J. and Patton, R.J. (1999). Robust Model-Based Fault Diagnosis for Dynamic Systems, Kluwer Academic Publishers, Boston, MA.
  • [6] Ding, S.X. (2008). Model-based Fault Diagnosis Techniques: Design Schemes, Algorithms, and Tools, 1st Edn., Springer, Berlin/Heidelberg.
  • [7] Fantuzzi, C. and Rovatti, R. (1996). On the approximation capabilities of the homogeneous Takagi–Sugeno model, Proceedings of the 5th IEEE International Conference on Fuzzy Systems, New Orleans, LA, USA, pp. 1067–1072.
  • [8] Fantuzzi, C., Simani, S., Beghelli, S. and Rovatti, R. (2002). Identification of piecewise affine models in noisy environment, International Journal of Control 75(18): 1472–1485.
  • [9] Isermann, R. (2005). Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance, 1st Edn., Springer-Verlag, Weinheim.
  • [10] Jain, T., Yam`e, J.J. and Sauter, D. (2012). Model-free reconfiguration mechanism for fault tolerance, International Journal of Applied Mathematics and Computer Science 22(1): 125–137, DOI: 10.2478/v10006-012-0009-6.
  • [11] Korbicz, J., Koscielny, J. M., Kowalczuk, Z. and Cholewa, W. (Eds.) (2004). Fault Diagnosis: Models, Artificial Intelligence, Applications, Springer-Verlag, London.
  • [12] Ljung, L. (1997). System Identification Toolbox for Use with MATLAB _ User’s Guide, The MathWorks, Inc., Natick, MA.
  • [13] Ljung, L. (1999). System Identification: Theory for the User, 2nd Edn., Prentice Hall, Englewood Cliffs, NJ.
  • [14] Marusak, P.M. and Tatjewski, P. (2008). Actuator fault tolerance in control systems with predictive constrained set-point optimizers, International Journal of Applied Mathematics and Computer Science 18(4): 539–551, DOI: 10.2478/v10006-008-0047-2.
  • [15] Pulkrabek, W.W. (2003). Engineering Fundamentals of the Internal Combustion Engine, 2nd Edn., Prentice Hall, Richmond, TX.
  • [16] Rovatti, R. (1996). Takagi–Sugeno models as approximators in Sobolev norms: The SISO case, 5th IEEE International Conference on Fuzzy Systems, New Orleans LA, USA, Vol. 2, pp. 1060–1066.
  • [17] Rovatti, R., Fantuzzi, C. and Simani, S. (2000). High-speed DSP-based implementation of piecewise-affine and piecewise-quadratic fuzzy systems, Signal Processing Journal 80(6): 951–963.
  • [18] Simani, S. (2007). Fault diagnosis of a simulated industrial gas turbine via identification approach, International Journal of Adaptive Control and Signal Processing 21(4): 326–353, DOI: 10.1002/acs.924.
  • [19] Simani, S., Fantuzzi, C. and Beghelli, S. (2000). Diagnosis techniques for sensor faults of industrial processes, IEEE Transactions on Control Systems Technology 8(5): 848–855.
  • [20] Simani, S., Fantuzzi, C. and Patton, R.J. (2003). Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques, Advances in Industrial Control, Vol. 1, Springer-Verlag, London.
  • [21] Simani, S., Fantuzzi, C., Rovatti, R. and Beghelli, S. (1999). Parameter identification for piecewise linear fuzzy models in noisy environment, International Journal of Approximate Reasoning 1(22): 149–167.
  • [22] Stamatis, D.H. (2003). Failure Mode and Effect Analysis: FMEA from Theory to Execution, 2nd Edn., ASQ Quality Press, Milwaukee, WI.
  • [23] Svard, C. and Nyberg, M. (2010a). Residual generators for fault diagnosis using computation sequences with mixed causality applied to automotive systems, IEEE Transactions on Systems, Man and Cybernetics, Part A: Systems and Humans 40(6): 1310–1328, DOI: 10.1109/TSMCA.2010.2049993.
  • [24] Svard, C. and Nyberg, M. (2010b). Residual generators for fault diagnosis using computation sequences with mixed causality applied to automotive systems, IEEE Transactions on Systems, Man and Cybernetics, Part A: Systems and Humans 40(6): 1310–1328, DOI: 10.1109/TSMCA.2010.2049993.
  • [25] Takagi, T. and Sugeno, M. (1985). Fuzzy identification of systems and its application to modeling and control, IEEE Transaction on System, Man and Cybernetics SMC-15(1): 116–132.
  • [26] Van Huffel, S. and Lemmerling, P. (Eds.) (2002). Total Least Squares and Errors-in-Variables Modeling: Analysis, Algorithms and Applications, 1st Edn., Springer-Verlag, London.
  • [27] Xu, D., Jiang, B. and Shi, P. (2012). Nonlinear actuator fault estimation observer: An inverse system approach via a T–S fuzzy model, International Journal of Applied Mathematics and Computer Science 22(1): 183–196, DOI: 10.2478/v10006-012-0014-9.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-573b45e8-ecfc-4a8a-8353-67512b1ced73
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.