Elasticity of cores manufactured in cold box technology

• Autorzy: Dobosz S. M. , Grabarczyk A. , Major-Gabryś K. , Bolibruchova D.

Identyfikatory

DOI

10.1515/amm-2017-0053

• Języki publikacji: EN

Abstrakty

EN

In the foundry industry, as in many other fields we seek to achieve the best quality with the least losses and the lowest cost. To meet these demands numerous plants increased automatization of their manufacturing processes. However, with changes in the production process it is necessary to change also the materials used. Not only casting alloys that are used in production, but also applied moulding and core sands are important. Proper selection and evaluation of the properties of used moulding mixtures is crucial in order to achieve a highly efficient production. In this article a new issue concerning the use of flexibility in foundry molding and core was mentioned. It explains the principles of measurement and interpretation of the obtained results for the cold-box moulding sands.

Słowa kluczowe

EN

moulding sands; cold-box technology; elasticity of moulding sands

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 1
• Strony: 351--354
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Dobosz S. M.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

autor

Grabarczyk A.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

autor

Major-Gabryś K.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Department of Moulding Materials, Mould Technology and Foundry of Non-Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

autor

Bolibruchova D.

• University of Zilina, Žilinská Univerzita v Žiline, Faculty of Mechanical Engineering, Univerzitná 8215/1 010 26 Žilina, Slovakia

Bibliografia

• [1] A. Grabarczyk., St. M. Dobosz, K. Major-Gabrys, J. Jakubski, J. Morek, Archives of Foundry Engineering 15 (4), 39-42 (2015).
• [2] P. Gröning, S. Schreckenberg, K. Jenrich, Giesserei 102 (01), 42-47 (2015).
• [3] H. Galina, Fizykochemia polimerów, 1998, OWPRz, Rzeszów.
• [4] W. Przygocki, A. Włochowicz, Fizyka polimerów, PWN, Warszawa 2001.
• [5] L .H. Sperling, Introduction to physical polymer science, 1992, Wiley&Sons, New York.
• [6] St .M. Dobosz, Metalurgia i Odlewnictwo 134, 26-37 (1990).
• [7] St. M. Dobosz, J. Morek, In Materials Engineering VI Sympozjum Metalurgiczne, 11-14 (2003).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).