The analysis and improvement of product quality using selected methods and tools in automotive industry enterprise

• Autorzy: Kardas E. , Pustějovská P.

Identyfikatory

DOI

10.25961/ent.manag.21.03.03

• Języki publikacji: EN

Abstrakty

EN

The work included a qualitative analysis of a product installed in passenger cars of a selected make and model. The product is an airbag module manufactured for one type of passenger car. This product is produced by an international production company with its plant in the northern part of the Silesian province. The initial analysis covered six calendar months, of which the month chosen for further analysis was the one in which the percentage of nonconforming products in the total production exceeded the assumed acceptable value. The analysis used four basic quality management instruments: the Pareto chart, the FMEA method, Ishikawa chart and the 5 Whys technique. After the analysis, improvement actions were also proposed.

Słowa kluczowe

EN

quality; quality analysis; quality tools; improvement; airbag module

PL

jakość; analiza jakości; narzędzia jakości; doskonalenie; moduł poduszki powietrznej

• Wydawca: Polskie Towarzystwo Zarządzania Produkcją
• Czasopismo: Zarządzanie Przedsiębiorstwem
• Rocznik: 2018
• Tom: Vol. 21, nr 3
• Strony: 18--25
• Opis fizyczny: Bibliogr. 18 poz., wykr.

Twórcy

autor

Kardas E.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Department of Production Management and Logistics, Dąbrowskiego 69, 42-201 Częstochowa, Poland

autor

Pustějovská P.

• VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry, Czech Republic

Bibliografia

• [1] Gruszka J., Misztal A., The New IATF 16949:2016 Standard In The Automotive Supply Chain, Research in Logistics and Production, 7, 4, 311-318, 2017.
• [2] Hamrol A., Quality management with examples, Printing House PWN, Warsaw 2013.
• [3] IATF 16949, The International Automotive Quality Standard. An Executive Overview, Perry Johnson Consulting, Inc., Detroit, 2016.
• [4] Information materials from Company X.2017.
• [5] ISO 9001:2015: Quality management systems - Requirements.
• [6] Kipigroch M., The analysis and imrovement of quality of products in the selected production company, Eng. Thesis, Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Częstochowa, Poland, 2017.
• [7] Komarnicka A., Sąsiadek M., Nahirny T., The challenges of the automotive industry in the light of the introduction of IATF 16949:2016 standard, Innovations in management and production engineering, Knosala R. (red.), Publishing House of the Polish Society for Production Management (PTZP), 2, 251-260, 2018.
• [8] Kowalczyk J., Basic concepts and regulations in the field of impact on quality, Library of Quality Guides - Training Materials, Bydgoszcz 1985.
• [9] Mazur A., Gołaś H., Principles, methods and techniques used in quality management, Printing House of Technical University of Poznan, 2010.
• [10] Mazur M., Analysis of production incompatibilities and risk level in series production of assembly elements for the automotive industry, MATEC Web of Conferences, 183, 03011, 2018.
• [11] Mazur M., Quality assurance in the manufacturing of automotive, Archives of Engineering Knowledge, 2, 1, 63-67, 2017.
• [12] Mazur M., Ulewicz R., Quality in the Manufacture of Safety Components in Cars, Advanced Manufacturing and Repair Technologies in Vehicle Industry, Romankiewicz F., Romankiewicz R., Ulewicz R. (red.), University of Zielona Góra, pp. 225-237, 2018.
• [13] Prussak W., Quality management. Selected elements, Printing House of Technical University of Poznan, 2006.
• [14] Słowiński B., Systematic evaluation of the quality of ceramic wheels, Printing House of Technical University of Koszalin, 2004.
• [15] B. Słowiński, Management and quality engineering, House of Technical University of Koszalin, 2011.
• [16] Stadnicka D., Pacana A., Budowa i rozwój skutecznych systemów zarządzania jakością, Printing House of Technical University of Rzeszow, 2016.
• [17] Starzyńska B. Quality tools and techniques relationship matrix as the element of manufacturing improvement methodology, Scientific Papers Technical University of Poznan, Machine Construction and Production Management, No. 13, pp. 97-108, 2010.
• [18] Stoma M., Models and methods for measuring the quality of services, Q&R Polska Sp. z o.o., Lublin, 2012.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).