Analysis of Epstein frame by finite element method

• Autorzy: Németh Zoltan , Kuczmann Miklós

Identyfikatory

DOI

10.15199/48.2019.06.05

Warianty tytułu

PL

Analiza satemu Epsteina z wykorzystaniem metody elementów skczonych

• Języki publikacji: EN

Abstrakty

EN

An Epstein frame has been built, which is used to measure magnetic properties of different kind of cores. Sinusoidal voltage excitation has been used in a frequency range of 1-400Hz. The measurements have been performed by a computer-controlled measurement system. The building and the measurement process have been published before. The objective of this work is to compare the simulation results performed with the COMSOL Multiphysics build-in modules and some potential formulation. For this work the Jiles-Atherton model has been chosen to prescribe hysteresis phenomena. The model parameters can be obtained by using the measurement results. The frame has been modelled in 2D.

PL

W artykule zaprezentowano analizę systemu wykorzystującego platformę COMSOL Multiphysics. Użyto modelu Jiles-Atherton do opisu histerezy. Przeprowadzono analizę 2D wykorzystując parametry uzyskane doświadczalnie.

Słowa kluczowe

EN

Epstein frame; COMSOL Multiphysics; Jiles-Atherton model; finite element method; potential formulation

PL

metoda Epsteina; platforma COMSOL Multiphysics; metoda elementów skończonych

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2019
• Tom: R. 95, nr 6
• Strony: 23--26
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Németh Zoltan

• Department of Automation, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Egyetem tér 1, H9026, Győr, Hungary

autor

Kuczmann Miklós

• Department of Automation, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Egyetem tér 1, H9026, Győr, Hungary

Bibliografia

• [1] A. Ivanyi: Hysteresis models in electromagnetic computation, Academic press, Budapest, 1997.
• [2] A. Ivanyi, M. Kuczmann: The finite element method in magnetics, Academic press, Budapest, 2008.
• [3] A. Szollosi, P. Baranyi: Influence of the tensor product model representation of QLPV models on the feasibility of linear matrix inequality based stability analysis, Asian Journal of control, Vol. 20. No. 1, pp.531-547, 2018.
• [4] B. Koprivica, A. Milovanovic, V. Brkovic: Electrical steel testing using modified Epstein frame, International Scientific Conference, Gabrovo,18-19 November 2016.
• [5] COMSOL: Modeling hysteresis effects, Solved with COMSOL Multiphysics 3.5a, 2008.
• [6] D. C. Jiles, D. L. Atherton: Ferromagnetic hysteresis, IEEE Transaction on Magnetics, Vol. 19, No. 5, pp. 2183–2185, 1983.
• [7] D. Jackiewicz, R. Szewczyk, J. Salach, A. Bienkowskyi: Application of Extended Jiles-Atherton model for modelling the influence of stresses on magnetic characteristics of the constuction steel, Acta Physica Polonica, Vol. 125, No. 6, pp. 392-393, 2014.
• [8] D. Khamari, A. Makouf, S. Drid, C.A. Larbi: Robust Linear Parameter Varying Induction Motor Control with Polytopic Models, Serbian Journal of Electrical Engineering, Vol. 10, No. 2, pp. 335-348, June 2013.
• [9] D. Lin, P. Zhou, A. Bergqvist: Improved vector play model and parameter identification for magnetic hysteresis materials, IEEE Transactions on Magnetics, Vol. 50, No. 2, 2014.
• [10] G. Parent, R. Penin, J. P. Lecointe, J. F. Brundny, T. Belgrand: Determination of Specific Losses in the limbs of an Epstein frame using a three Epstein frame methodology applied to grain oriented electrical steels, Sensors, Vol. 16, No. 6, 826, 2016.
• [11] H. Benderradji, L. Chrifi-Alaoui, S. Mahieddine-Mahmoud, A. Makouf: Robust Control of Induction Motor with H∞ Theory based on Loopshaping, Journal of Electrical Engineering & Technology, Vol. 6, No. 2, pp. 226-232, 2011.
• [12] IEC 60404-2 Magnetic materials, Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame, International Electrotechnical Comission Std, 1996.
• [13] Ioan R. Ciric: Scalar potential formulations for magnetic fields produced by arbitrary electric current distributions on the presence of ferromagnetic bodies, IEEE Transaction on Magnetics, Vol. 50, No.1, 2014.
• [14] J. Bokor, P. Gáspár, Z. Szabó: Robust Control Theory with automotive applications, Typotex, 2012.
• [15] J. P.A. Bastos, N. Sadowski: Electromagnetic modeling by finite element methods, Marcel Dekker Inc, New York, 2003.
• [16] P. Baranyi: TP-model Transformation-Based-Control Design Frameworks, Springer International Publishing Switzerland, 2016.
• [17] P. Kis Jiles-Atherton model implementation to edge finite element method, PhD Thesis, Budapest University of Technology and Economics, 2007.
• [18] R. Kaczmarek, M. Amar, F. Protat: Iron loss under PWM voltage supply on Epstein frame and in induction motor core, IEEE Transactions on Magnetics, Vol. 32, No. 1, pp. 189-194, 1996.
• [19] S. M. Nawazish Ali, Athar Hanif, M. J. Hossain, Vivek Sharma: An LPV H∞ Control Design for the Varying Rotor Resistance Effects on the Dynamic Performance of Induction Motors, Industrial Electronics (ISIE) 2018 IEEE 27th International Symposium, pp. 114-119, 2018.
• [20] Z. Németh, M. Kuczmann: Measuring and simulation magnetic characteristics using Epstein frame, Pollack Periodica, Vol. 13, No. 2, pp. 15-26 (2018).
• [21] COMSOL Multiphysics 5.2a Release highlights: https://www.comsol.com/release/5.2a/acdc-module

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).