PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wear Process Analysis of the Polytetrafluoroethylene/Kevlar Twill Fabric Based on the Components’ Distribution Characteristics

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Polytetrafluoroethylene (PTFE)/Kevlar fabric or fabric composites with excellent tribological properties have been considered as important materials used in bearings and bushing, for years. The components’ (PTFE, Kevlar, and the gap between PTFE and Kevlar) distribution of the PTFE/Kevlar fabric is uneven due to the textile structure controlling the wear process and behavior. The components’ area ratio on the worn surface varying with the wear depth was analyzed not only by the wear experiment, but also by the theoretical calculations with our previous wear geometry model. The wear process and behavior of the PTFE/Kevlar twill fabric were investigated under dry sliding conditions against AISI 1045 steel by using a ring-on-plate tribometer. The morphologies of the worn surface were observed by the confocal laser scanning microscopy (CLSM). The wear process of the PTFE/Kevlar twill fabric was divided into five layers according to the distribution characteristics of Kevlar. It showed that the friction coefficients and wear rates changed with the wear depth, the order of the antiwear performance of the previous three layers was Layer III>Layer II>Layer I due to the area ratio variation of PTFE and Kevlar with the wear depth.
Rocznik
Strony
295--302
Opis fizyczny
Bibliogr. 18 poz.
Twórcy
autor
  • Aviation Key Laboratory of Science and Technology on Generic Technology of Self-lubricating Spherical Plain Bearing, Yanshan University, Qinhuangdao 066004, Hebei, China
  • College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China
autor
  • College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China
  • Aviation Key Laboratory of Science and Technology on Generic Technology of Self-lubricating Spherical Plain Bearing, Yanshan University, Qinhuangdao 066004, Hebei, China
autor
  • College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China
  • Aviation Key Laboratory of Science and Technology on Generic Technology of Self-lubricating Spherical Plain Bearing, Yanshan University, Qinhuangdao 066004, Hebei, China
autor
  • College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China
  • Aviation Key Laboratory of Science and Technology on Generic Technology of Self-lubricating Spherical Plain Bearing, Yanshan University, Qinhuangdao 066004, Hebei, China
autor
  • Department of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China
Bibliografia
  • [1] Shivamurthy, B., Bhat, K.U., Anandhan, S. (2013). Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites. Materials & Design, 44, 136-143.
  • [2] Li, J., Xia, Y.C. (2009). The reinforcement effect of carbon fiber on the friction and wear properties of carbon fiber reinforced PA6 composites. Fibers and Polymers, 10(4), 519-525.
  • [3] Xiang, D.H., Shu, W.C., Li, K. (2008). Friction and wear behavior of a new 40Cr steel-PTFE fabric composite under heavy loads. Materials Science and Engineering A, 483-484, 365-368.
  • [4] Gu, D.P., Yang, Y.L., Qi, X.W., et al. (2012). Influence of weave structures on the tribological properties of hybrid Kevlar/PTFE fabric composites. Chinese Journal of Mechanical Engineering, 25(5), 1044-1051.
  • [5] Tiwari, S., Bijwe, J., Panier, S. (2011). Adhesive wear performance of polyetherimide composites with plasma treated carbon fabric. Tribology International, 44, 782-788.
  • [6] Su, F.H., Zhang, Z.Z., Wang, K., et al. (2005). Tribological and mechanical properties of the composites made of carbon fabrics modified with various methods. Composites: Part A, 36, 1601-1607.
  • [7] Zhang, H.J., Zhang, Z.Z., Guo, F. (2009). Effects of air plasma treatment on tribological properties of Hybrid PTFE/Kevlar Fabric Composite. Journal of Applied Polymer Science, 144, 3980-3986.
  • [8] Su, F.H., Zhang, Z.Z., Guo, F., et al. (2007). Friction and wear properties of fabric/phenolic composites with plasma treated-hybrid glass/PTFE fabric. Composites Science and Technology, 67, 981-988.
  • [9] Zhang, H.J., Zhang, Z.Z., Guo, F., et al. (2009). The influence of plasma treatment on the tribological properties of hybrid PTFE/Cotton fabric/phenolic composites. Polymer Composites, 30, 1523-1531.
  • [10] Zhang, X.R., Pei, X.Q., Jia, Q., et al. (2009). Effects of carbon fiber surface treatment on the tribological properties of 2D woven carbon fabric/polyimide composites. Applied Physics A, 95(3), 793-799.
  • [11] Zhang, X.R., Pei, X.Q., Wang, Q.H. (2008). Friction and wear properties of combined surface modified carbon fabric reinforced phenolic composites. European Polymer Journal. 44(8), 2551-2557.
  • [12] Suresha, B., Ramesh, B.N., Subbaya, K.M., et al. (2010). Influence of graphite filler on two-body abrasive wear behaviour of carbon fabric reinforced epoxy composites. Materials & Design, 31(4), 1833-1841.
  • [13] Li, H.L., Yin, Z.W., Jiang, D., et al. (2014). Tribologicalbehavior of hybrid PTFE/Kevlar fabric composites with nano-Si3N4 and submicronsize WS2 fillers. Tribology International, 80, 172-178.
  • [14] Sharma, A., Rattan, R., Batra, N.K. (2013). Characteristics of polyetherimide with carbon fabric composites in adhesive wear. International Journal of Current Engineering and Technology, 3, 1992-1995.
  • [15] Sharma, M., Tiwari, S., Bijwe, J. (2010). Optimization of material parameters for development of polyetherimide composites. Materials Science and Engineering B, 168, 55-59.
  • [16] Qi, X.W., Ma, J., Jia, Z.N., et al. (2014). Effects of weft density on the friction and wear properties of selflubricating fabric liners for journal bearings under heavy load conditions. Wear, 318, 124-129.
  • [17] Gu, D.P., Yang, Y.L., Chen, S.W., et al. (2014). A wear geometry model of plain woven fabric composites. AUTEX Research Journal, 14(3), 168-173.
  • [18] Koltysheva, N.G., Lomov, S.V., Truevtzev, N.N. (2004). Abrasion resistance of cotton/flax fabrics: 3D computer simulations of fabric wear geometry. AUTEX Research Journal, 4(4), 182-186.
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-567d19bc-f0d9-40bb-a25a-8c34f129492a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.