PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Thermal Properties of Foundry Mould Made of Used Green Sand

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents results of measuring heat diffusivity and thermal conductivity coefficients of used green foundry sand in temperature range ambient – 600°C. During the experiments a technical purity Cu plate was cast into the green-sand moulds. Basing on measurements relationships of the measured properties were evaluated. It was confirmed that the obtained relationships are complex and that water vaporization strongly influences thermal conductivity of the moulding sand in the first period of the mould heating by the poured and solidified casting.
Rocznik
Strony
29--34
Opis fizyczny
Bibliogr. 12 poz., il., rys., tab., wykr.
Twórcy
  • AGH University of Science and Technology, Department of Foundry Processes Engineering, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland
  • AGH University of Science and Technology, Department of Foundry Processes Engineering, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland
autor
  • AGH University of Science and Technology, Department of Foundry Processes Engineering, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland
Bibliografia
  • [1] Krajewski, P.K., Zovko–Brodarac, Z. & Krajewski, W.K. (2013). Heat Exchange in the System Mould – Riser – Ambient. Part I: Heat exchange coefficient from mould external surface. Archives of Metallurgy and Materials 58(3), 833-835. DOI: 10.2478/amm-2013-0081.
  • [2] Krajewski, P.K., Gradowski, A. & Krajewski, W.K. (2013). Heat Exchange in the System Mould – Riser – Ambient. Part II: Heat emission coefficient from open riser surface to ambient. Archives of Metallurgy and Materials. 58(4), 1149-1153. DOI: 10.2478/amm-2013-0140.
  • [3] Krajewski, P.K., Magda, K. & Stojecki, P. (2013). Examining and modelling the influence of thermo-physical properties of liquid metal and sand mould on solidification time of pure Al castings. Archives of Foundry Engineering. 13 (spec.3), 89-94.
  • [4] Ignaszak Z. (1989). Thermo-physical properties of materials, forms in terms of casting solidification process control. Poznań: Wydawnictwo Politechniki Poznańskiej. (in Polish).
  • [5] Krajewski, P.K., Piwowarski, G., Suchy, J.S. (2012). Formulating the boundary conditions for numerical model of heat transfer in a system heat source – heat sink. Thermal conductivity of the system, Proceedings of the 1st International Workshop "90 Years of Foundry Engineers Educating by the AGH University of Science and Technology", Faculty of Foundry Engineering, http://www.1odlewnictwo.agh.edu.pl/inne/konferencje/konferencja_2012/abstract/streszczenia.html
  • [6] Kubo, K. & Pehlke, R.D. (1986). Heat and moisture tran sfer in sand molds containing water. Metallurgical Transactions 17B (Dec.1986), 903-911.
  • [7] Ignaszak, Z., Graczyk, L. & Popielarski, P. (2006). Eksperymentalno – symulacyjny sposób identyfikacji strefy przewilżonej w formie. Archives of Foundry. 6(22), 216-223.
  • [8] Krajewski, P.K., Piwowarski,G. Krajewski, W.K. (2014). Determining Temperature Dependencies of Sand Mould Thermal Properties. Materials Science Forum. 791-792, 452-457. DOI:10.4028/www.scientific.net/MSF.790-791.452.
  • [9] Krajewski, P.K., Piwowarski, G., Suchy, J.S., Krajewski, W.K. (2014). Thermo-physical properties vs. temperature of selected foundry sands. Proceedings of 71st World Foundry Congress. Bilbao, Spain: World Foundry Organization (on USB flash).
  • [10] Krajewski, P.K., Piwowarski, G., Żak, P.L. & Krajewski, W.K. (2014). Experiment and numerical modelling the time of plate-shape casting solidification vs. thermal conductivity of mould material. Archives of Metallurgy and Materials. 59(4), 1405-1408. DOI: 10.2478/amm-2014-0238.
  • [11] Krajewski, P.K., Piwowarski, G. & Suchy, J.S. (2014). Thermal conductivity of the green-sand mould poured with copper. Archives of Foundry Engineering. 14(spec.4), 67-70.
  • [12] Krajewski, P.K., Suchy, J.S., Piwowarski, G. & Krajewski, W.K. (2015). High Temperature Thermal Properties of Bentonite Foundry Sand. Archives of Foundry Engineering. 15(2), 47-50.
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-56403a58-df13-4d1f-b79c-cde4ed9429cf
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.