The influence of post-process operations on the mechanical properties of titanium alloy Ti-6Al-7Nb, produced by selective laser melting

• Autorzy: Karoluk M. , Chlebus E.
• Języki publikacji: EN

Abstrakty

EN

Even though selective laser melting (SLM) has been available for more than a decade, during few last years the interest in this technology has grown extremely. SLM technology allows to fabricate fully functional and complex metal objects, layer by layer, via selective melting of material using laser beam. However, producing object by melting thin layers of material causes conditions of fast heat removal. This phenomenon leads to equilibrium microstructures, accompanied by the residual stresses which cause the decrease of mechanical properties. The following paper presents the result of research in the field of the influence of the post-process operations, such as machining and heat treatment, on the mechanical properties of alloy Ti-6Al-7Nb build by SLM.

Słowa kluczowe

EN

selective laser melting; SLM; post-process operations; titanium alloy; Ti-6Al-7Nb

PL

selektywne spiekanie laserowe; SLM; stop tytanu; Ti-6Al-7Nb

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Interdisciplinary Journal of Engineering Sciences
• Rocznik: 2015
• Tom: Vol. 3, no. 1
• Strony: 16--19
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Karoluk M.

• Wroclaw University of Technology; Mechanical Department, Łukasiewicza 5, 50-370 Wroclaw, Poland

autor

Chlebus E.

• Wroclaw University of Technology; Mechanical Department, Łukasiewicza 5, 50-370 Wroclaw, Poland,

Bibliografia

• [1] Hopkinson, N., Hague, R. & Dickens, P. Rapid manufacturing: an industrial revolution for a digital age., Wiley-Blackwell, Berlin, 2005.
• [2] http://www.eos.info/additive_manufacturing/for_ technology_interested, 4.03.2015.
• [3] Gibson, I., Rosen, D. W. & Stucker, B. Additive manufacturing technologies: rapid prototyping to direct digital manufacturing. (Springer, London, 2010).
• [4] Kruth J.P., Froyen L., Vaerenbergh J., Mercelis P., Rombouts M., Lauwers B., Selective laser melting of iron-based powder, Journal of Materials Processing Technology 149 (2004), 616–622.
• [5] Santos E. C., Shiomi M., Osakada K., Laoui T., Rapid manufacturing of metal components by laser forming, International Journal of Machine Tools & Manufacture 46 (2006), 1459–1468.
• [6] Yadroitsev I., Thivillon L., Bertrand Ph., Smurov I., Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder, Applied Surface Science 254 (2007), 980–983.
• [7] Lu''tjering, G. Influence of processing on microstructure and mechanical properties of titanium alloys. Mat. Sci. and Eng.: A 243, 32–45 (1998).
• [8] Karoluk M., Poprocesowa obróbka dwufazowych stopów tytanu wytworzonych metodą selektywnego przetapiania proszków (SLM), Praca mgr, Politechnika Wrocławska, Wrocław 2014.
• [9] N. Jones, T. Sercombe, R. Day, A. Kop, Heat treatment of Ti-6Al-7Nb components produced by selective laser melting Rapid Prototyping Journal 14/5 (2008), 300–304.
• [10] Karoluk M, Dobór parametrów obróbki cieplnej dwufazowych stopów tytanu wytworzonych metodą selektywnego przetapiania proszków (SLM), Praca inż., Politechnika Wrocławska, Wrocław, 2010 r.
• [11] M. J. Donachie, Titanium: A Technical Guide, ASM International, 2000.