Control charts monitoring for quality concrete pavements

• Autorzy: Skrzypczak Izabela , Kokoszka Wanda , Pytlowany Tomasz , Radwański Wojciech

Identyfikatory

DOI

10.20858/sjsutst.2020.106.13

• Języki publikacji: EN

Abstrakty

EN

In this article, Control charts are employed to analyse the strength quality control of ready-mixed concrete for rigid pavement. The results of the study support that CUSUM statistical analysis is more sensitive than the Shewhart control chart. The CUSUM chart can detect the continual changes in the concrete quality in a more accurate way. By combining the CUSUM control chart and the Shewhart control chart, higher accuracy of quality control analysis could be achieved, in order words, for quality control performance when in built/pouring the ready-mix concrete as rigid pavement.

Słowa kluczowe

EN

pavements; quality; monitoring; CUSUM; Shewhart’s chart

PL

chodnik; jakość; monitorowanie; CUSUM; wykres Shewharta

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2020
• Tom: z. 106
• Strony: 153--163
• Opis fizyczny: Bibliogr. 30 poz.

Twórcy

autor

Skrzypczak Izabela

• Faculty of Civil and Environmental Engineering and Architecture, Rzeszów University of Technology, al. Powstańców Warszawy 12 Street, 35-959 Rzeszów, Poland

autor

Kokoszka Wanda

• Faculty of Civil and Environmental Engineering and Architecture, Rzeszów University of Technology, al. Powstańców Warszawy 12 Street, 35-959 Rzeszów, Poland

autor

Pytlowany Tomasz

• Polytechnic Institute, Krosno State College, Rynek 1 Street, 38-400 Krosno, Poland

autor

Radwański Wojciech

• Polytechnic Institute, Krosno State College, Rynek 1 Street, 38-400 Krosno, Poland

Bibliografia

• 1. Ahmet Beycioğlu, Adil Gültekin, Hüseyin Yılmaz Aruntas, Osman Gencel, Magdalena Dobiszewska, Witold Brostow. 2017. “Mechanical properties of blended cements at elevated temperatures predicted using a fuzzy logic model”. Computers and concrete 20(2): 247-255.
• 2. Cihlarova D., P. Mondschein, S. Capayova. 2018. “Compaction density determination of the road asphalt layers”. Komunikacie (Communications - Scientific Letters of the University of Zilina) 20(3): 61-66. ISSN: 1335-4205.
• 3. Chakraborty Joyraj, Andrzej Katunin. 2019. “Structural diagnosis of rail vehicles and method for redesign”. Diagnostyka 20(1): 103-110. DOI: https://doi.org/10.29354/diag/100448.
• 4. Czarnecki Lech, Piotr Wojciechowski. 2012. Modelling of concrete carbonation; is it a process unlimited in time and restricted in space?” ACI Materials Journal 109(3): 275-282.
• 5. Czarnecki Lech, Piotr Wojciechowski, Grzegorz Adamczewski. 2018. “Risk of concrete carbonation with mineral industrial by-products”. KSCE Journal of Civil Engineering 22(2): 755-764
• 6. Deja Jan. 2003. “Polish roads”. Review of Road and Bridge Technique.
• 7. Dobiszewska Magdalenia. 2017. “Waste materials used in making mortar and concret”. Journal of Materials Education 39(5-6): 133-156.
• 8. Dutta Goutam, Debasis Sarkar. 2008. Design and Application of Risk Adjusted Cumulative Sum (RACUSUM) for Online Strength Monitoring of Ready Mixed Concrete. Indian Institute of Management Ahmedabad, India.
• 9. EN 206: 2013 Concrete: Specification, Performance, Production and Conformity.
• 10. Eugene L. Grant, Richard S. Leavenworth. 1988. Statistical Quality Control. McGrawHill, USA. ISBN-10: 0070241171.
• 11. Dong Han, Fugee Tsung, Xijian Hu and Kaibo Wang. 2007. “CUSUM and EWMA MultiCharts for detecting a range of mean shifts”. Statistica Sinica 17: 1139-1164.
• 12. Fah Fatt Gan. 1991. “An optimal design of CUSUM quality control charts”. Journal of Quality Technology 23: 279-286.
• 13. Gibb Ian, Tom A Harrison. 2010. Use of control charts in the production of concrete. DOI:10.13140/RG.2.1.3233.7045.
• 14. Goel Amrit L., S.M. Wu. 1973. “Economically Optimum Design of CUSUM Charts”. Management Science 19: 1271-1282.
• 15. Jasiczak Józef. 1992. Kryteria kontroli stabilizacji wytrzymałości betonu na ściskanie określane metodami probabilistycznymi. [In Polish: Criteria for controlling the stabilization of concrete compressive strength determined by probabilistic methods]. Poznan: WPP.
• 16. Macioszek Elżbieta. 2017. “Analysis of Significance of Differences Between Psychotechnical Parameters for Drivers at the Entries to One-lane and Turbo Roundabouts in Poland”. In: G. Sierpiński (Ed.). „Intelligent Transport Systems and Travel Behaviour”. Advances in Intelligent Systems and Computing 505: 149-161. Springer International Publishing Switzerland.
• 17. Mackiewicz Piotr. 2015. “Analysis of stresses in concrete pavement under a dowel according to its diameter and load transfer efficiency”. Canadian Journal of Civil Engineering 42(11): 845-853.
• 18. Mackiewicz Piotr. 2015. “Finite-Element Analysis of Stress Concentration around Dowel Bars in Jointed Plain Concrete Pavement”. Journal of Transportation Engineering 141(6).
• 19. Mackiewicz Piotr. 2014. “Thermal stress analysis of jointed plane in concrete pavements”. App. Therm. Eng. 73: 1167-1174.
• 20. Matić B., D. Matić, D. Ćosić, S. Sremac, G. Tepić, P. Ranitović. 2013. „A model for the pavement temperature prediction at specified depth”. Metalurgija 52(4): 505-508.
• 21. Matić B., D. Matić, S. Sremac, N. Radović, P. Vidikant. 2014. „A model for the pavement temperature prediction at specified depth using neural networks”. Metalurgija 53(4): 665-667.
• 22. Montgomery Douglas C. 2008. Introduction to statistical quality control. Wiley, New York. NIST/SEMATECH e-handbook of statistical methods.
• 23. Montgomery Douglas C. 1980. “The Economic Design of Control Charts: A Review and Literature Survey”. Journal of Quality Technology 12: 75-87.
• 24. Pavement interactive. Available at: https://www.pavementinteractive.org/referencedesk/qc-qa/statistical-acceptance/control-charts/.
• 25. Sarkar D., B. Bhattacharjee. 2003. “Quality Monitoring of Ready Mixed Concrete Using Cusum System”. Indian Concrete Journal 7: 1060-1065. DOI: 10.1002/best.200810114.
• 26. Sheng Li, Zhaohui Liu. 2012. „Study on crack extension of the AC layer of CRC+AC composite pavement”. Mechanika 18(2): 141-147. ISSN 1392-1207.
• 27. Shih-Hui Hsu. 2007. Quality Management, Future Career Management Corporation. FCMC, Taipei.
• 28. Shin-Yi Chen. 2009. “The concrete is in charge of application and improvement of drafting”. Concrete Technology 3. Taiwan Concrete Institute. Taipei.
• 29. Sztubecka Małgorzta, Adam Bujarkiewicz, Jacek Sztubecki. 2016. “Optimization of Measurement Points Choice in Preparation of Green Areas Acoustic Map”. Civil and Environmental Engineering Reports 23(4): 137-144.
• 30. Szydło Antoni. 2004. Road pavements made of cement concrete. Theory of dimensioning. Cracow: Polski Cement.