Structure and Magnetic Properties of Bi5Ti3FeO15 Ceramics Prepared by Sintering, Mechanical Activation and Edamm Process. A Comparative Study

• Autorzy: Jartych E. , Pikula T. , Mazurek M. , Franus W. , Lisinska-Czekaj A. , Czekaj D. , Oleszak D. , Surowiec Z. , Aksenczuk A. , Calka A.

Identyfikatory

DOI

10.1515/amm-2016-0147

• Języki publikacji: EN

Abstrakty

EN

Three different methods were used to obtain Bi₅Ti₃FeO₁₅ ceramics, i.e. solid-state sintering, mechanical activation (MA) with subsequent thermal treatment, and electrical discharge assisted mechanical milling (EDAMM). The structure and magnetic properties of producedBi₅Ti₃FeO₁₅ samples were characterized using X-ray diffraction and Mössbauer spectroscopy. The purest Bi₅Ti₃FeO₁₅ ceramics was obtained by standard solid-state sintering method. Mechanical milling methods are attractive because the Bi₅Ti₃FeO₁₅ compound may be formed at lower temperature or without subsequent thermal treatment. In the case of EDAMM process also the time of processing is significantly shorter in comparison with solid-state sintering method. As revealed by Mössbauer spectroscopy, at room temperature theBi₅Ti₃FeO₁₅ ceramics produced by various methods is in paramagnetic state.

Słowa kluczowe

EN

Aurivillius compounds; sintering; mechanical activation; magnetic properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2A
• Strony: 869--874
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Jartych E.

• Lublin University of Technology, Institute of Electronics and Information Technology, 38a Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Pikula T.

• Lublin University of Technology, Institute of Electronics and Information Technology, 38a Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Mazurek M.

• Lublin University of Technology, Institute of Electronics and Information Technology, 38a Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Franus W.

• Lublin University of Technology, Department of Geotechnics, Faculty of Civil Engineering and Architecture, 40 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Lisinska-Czekaj A.

• University of Silesia, Institute of Technology and Mechatronics, 12 Żytnia Str., 41-200 Sosnowiec, Poland

autor

Czekaj D.

• University of Silesia, Institute of Technology and Mechatronics, 12 Żytnia Str., 41-200 Sosnowiec, Poland

autor

Oleszak D.

• Warsaw University of Technology, Faculty of Materials Science And Engineering, 141 Wołoska Str., 02-507 Warsaw, Poland

autor

Surowiec Z.

• Maria Curie-Sklodowska University, Institute of Physics, 1 M.C. Sklodowskiej Sq, 20-031 Lublin, Poland

autor

Aksenczuk A.

• University of Wollongong, Department of Materials Science And Engineering, Wollongong, Nsw 2518, Australia

autor

Calka A.

• University of Wollongong, Department of Materials Science And Engineering, Wollongong, Nsw 2518, Australia

Bibliografia

• [1] N. A. Lomanova, M. I. Morozov, V. L. Ugolkov, V.V. Gusarov, Inorg. Mater. 42, 189 (2006).
• [2] N. A. Lomanova, V. V. Gusarov, Inorg. Mater. 47, 477 (2011).
• [3] E. Jartych, T. Pikula, M. Mazurek, A. Lisinska-Czekaj, D. Czekaj, K. Gaska, J. Przewoznik, C. Kapusta, Z. Surowiec, J. Magn. Magn. Mater. 342, 27 (2013).
• [4] M. Fiebig, J. Phys. D Appl. Phys. 38, R123 (2005).
• [5] S. Priya, J. Electroceram. 19, 147 (2007).
• [6] J. Wang, J.B. Neaton, H. Zheng, V. Nagarajan, S.B. Ogale, B. Liu, D. Viehland, V. Vaithyanathan, D.G. Scholm, U.V. Waghmare, N.A. Spaldin, K.M. Rabe, M. Wutting, Science 299, 1719 (2003).
• [7] T. Pikula, P. Guzdek, J. Dzik, A. Lisinska-Czekaj, E. Jartych, Acta Phys. Pol. A 127, 296 (2015).
• [8] J. A. Bartkowska, R. Zachariasz, D. Bochenek, J. Ilczuk, Arch. Metall. Mater. 58, 1401 (2013).
• [9] M. Mazurek, D. Oleszak, T. Pikula, M. Karolus, E. Jartych, Acta Phys. Pol. A 126, 975 (2014).
• [10] A. Calka, D. Wexler, Nature 147, 419 (2002).
• [11] X. W. Dong, K.F. Wang, J.G. Wan, J.S. Zhu, J.M. Liu, J. Appl. Phys. 103, 094101 (2008).
• [12] A. Y. Birenbaum, C. Ederer, Phys. Rev. B 90, 214109 (2014).
• [13] N. A. Lomanova, V.G. Semenov, V.V. Panchuk, V.V. Gusarov, J. Alloys Comp. 528, 103 (2012).