Evaluation of High Temperature Corrosion Resistance of Finned Tubes Made of Austenitic Steel And Nickel Alloys

• Autorzy: Turowska A. , Adamiec J.

Identyfikatory

DOI

10.1515/amm-2016-0183

• Języki publikacji: EN

Abstrakty

EN

The purpose of the paper was to evaluate the resistance to high temperature corrosion of laser welded joints of finned tubes made of austenitic steel (304,304H) and nickel alloys (Inconel 600, Inconel 625). The scope of the paper covered the performance of corrosion resistance tests in the atmosphere of simulated exhaust gases of the following chemical composition: 0.2% HCl, 0.08% SO₂, 9.0% O₂ and N₂ in the temperature of 800°C for 1000 hours. One found out that both tubes made of austenitic steel and those made of nickel alloy displayed good resistance to corrosion and could be applied in the energy industry.

Słowa kluczowe

EN

finned tubes; laser welding; high temperature corrosion; austenitic steel; nickel alloys

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 1089--1093
• Opis fizyczny: Bibliogr. 5 poz., rys., tab., wykr.

Twórcy

autor

Turowska A.

• Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, 8 Krasinskiego Str., 40-019 Katowice, Poland

autor

Adamiec J.

• Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, 8 Krasinskiego Str., 40-019 Katowice, Poland

Bibliografia

• [1] M. Więcek, Wpływ technologii spawania na strukturę i właściwości rur ożebrowanych dla przemysłu energetycznego, PhD Thesis, Silesian University of Technology, Katowice, 2015.
• [2] R. Kocurek, J. Adamiec, Advances in Materials Science 13, 9, (2013).
• [3] European Parliament Reports, Power Industry and Environment, October 2010.
• [4] J. Adamiec, M. Więcek, A. Turowska, Przegląd Spawalnictwa 87, 32 (2015).
• [5] T. Chmielniak, H. Łukowicz, A. Kochaniewicz, M. Mroncz, Energetyka 2, 84 (2011).

Uwagi

EN

The project was financed iinder the Applied Research Programme funded by the National Centre for Research and Development, project entitled: "Technology of laser welding of finned tubes made of austenitic steel and nickel alloys designed for boilers with supercritical and ultra supercritical parameters", agreement no: PBS1/A5/13/2012

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę