Modelling of abrasive blasting technological modes for curvilinear surfaces of machine parts

• Autorzy: Stotsko Z. A. , Stefanovych T. O.
• Konferencja: Międzynarodowa Konferencja Naukowo-Techniczna „Diagnostyka Materiałów Polimerowych” (2 ; 08-15.12.2012 ; Male, Val di Sole, Włochy)
• Języki publikacji: EN

Abstrakty

EN

An expression for determining the glancing impact angle for a point on the curvilinear surface of machine parts for abrasive blasting is obtained. It allows to estimate the distribution of kinetic energy of working medium all along the treated surface and, therefore, the surface quality parameters.

Słowa kluczowe

EN

modeling of technical systems; modeling of technical processes; surface engineering; machine part; abrasive blasting; curvilinear surface; glancing impact angle

PL

modelowanie systemów technicznych; modelowanie procesów technicznych; inżynieria powierzchni; części maszyn; czyszczenie strumieniowo-ścierne; powierzchnia krzywoliniowa

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Inżynierii Materiałów Polimerowych i Barwników
• Czasopismo: Przetwórstwo Tworzyw
• Rocznik: 2013
• Tom: [R.] 19, nr 1 (151)
• Strony: 54--57
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Stotsko Z. A.

• Department of Electronic Machine Building, Lviv Polytechnic National University, Bandery str. 12, Lviv, 79013, Ukraine

autor

Stefanovych T. O.

• Department of Electronic Machine Building, Lviv Polytechnic National University, Bandery str. 12, Lviv, 79013, Ukraine

Bibliografia

• 1. Provolotskiy A. E. Wet abrasive blasting treatment of machine parts / A. E. Provolotskiy. Kiev: Technics. -1989. -177 p. (in Russian)
• 2. Salenko O. F. Efficient wet abrasive cutting / O. F. Salenko, V. B. Strutynsky, M. V. Zagirnyak; Monograph. - Kremenchuk: KSPU, 2005. - 488 p. (in Ukrainian)
• 3. Zin I. Surface strengthening as a preparating tanks before applying protective coatings / I. Zin, M. Student, B. Zathey// Lviv State Agrarian University Bulletin of Agricultural Engineering Research. - 2005. - No. 9. - P. 288-298. (in Ukrainian)
• 4. Stotsko Z. A Investigations on the machine parts treatment by non-bound blast particles / Z. A. Stoisko, T. O. Stefanovych // Journal of Achievements in Materials and Manufacturing Engineering, the organ of the World academy of Materials and Manufacturing Engineering. - Gliwice, Poland. - December, 2011. - No. 49 (2). - P. 440-459.
• 5. Gao Y. K. Improvement of fatigue property in 7050-T7451 aluminum alloy by laser peening and shot peening / Y. K. Gao // Materials Science and Engineering A. - 2011. - No. 528. -P. 3823-3828.
• 6. Zhou Wang XRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17-4PH / Zhou Wang, Weizhi Luan, Junjie Huang, Chuanhai Jiang // Materials Science and Engineering A. -2011. - No. 528. - P. 6417-6425.
• 7. Taehyung Kima A simple but effective FE model with plastic shot for evaluation of peening residual stress and its experimental validation / Taehyung Kima, Hyungyil Leeb, Hong Chul Hyunb, Sunghwan Jungc // Materials Science and Engineering A. -2011. - No. 528. -P. 5946-5954.
• 8. Jinxiang Liua Prediction of residual stress relaxations in shot-peened specimens and its application for the rotor disc assessment / Jinxiang Liua, Huang Yuan // Materials Science and Engineering A. -2010. - No. 527. - P. 6690-6698.
• 9. Meguid S. A. Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses / S. A. Meguid, G. Shagal, J. C. Stranart, J. Daly // Theory, Methods and Applications, Elsevier Science, Finite Elements in Analysis and Design. - 1999.- No. 31 (3). - P. 179-191.
• 10. Al-Obaid Y. F. Shot peening mechanics: experimental and theoretical analysis / Y. F. Al-Obaid // Mechanics of Materials. -1995. - No. 19. P. 251-260.