PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Quantification of the Radiative and Convective Heat Transfer Processes and their Effect on mSOFC by CFD Modelling

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The CFD modelling of heat transfer in a microtubular Solid Oxide Fuel Cell (mSOFC) stack has been presented. Stack performance predictions were based on a 16 anode-supported microtubular SOFCs sub-stack, which is a component of the overall stack containing 64 fuel cells. Both radiative and convective heat transfer were taken into account in the modelling. The heat flux value corresponded to the cell voltage of 0.7 [V]. Two different cases of the inlet air velocity of 2.0 and 8.5 [ms–1] were considered. It was found that radiation accounted for about 20–30 [%] of the total heat flux from the active tube surface, which means that the convective heat transfer predominated over the radiative one.
Rocznik
Strony
51--55
Opis fizyczny
Bibliogr. 11 poz., rys., wz.
Twórcy
  • West Pomeranian University of Technology, Szczecin, Institute of Chemical Engineering and Environmental Protection Processes, al. Piastów 42, 71-065 Szczecin, Poland
autor
  • West Pomeranian University of Technology, Szczecin, Institute of Chemical Engineering and Environmental Protection Processes, al. Piastów 42, 71-065 Szczecin, Poland
autor
  • West Pomeranian University of Technology, Szczecin, Institute of Chemical Engineering and Environmental Protection Processes, al. Piastów 42, 71-065 Szczecin, Poland
Bibliografia
  • 1. Lockett, M., Simmons, M.J.H. & Kendall, K. (2004). CFD to predict temperature profiles for scale up of microtubular SOFC stacks. J. Pow. Sources. 131, 243–246. DOI: 10.1016/j.powsour.2003.11.082.
  • 2. Akhtar, N., Decent, S.P. & Kendall, K. (2010). Numerical modelling of methane-powered microtubular single chamber solid oxide fuel cell. J. Pow. Sources. 195, 7796–7807. DOI: 10.1016/j.powesourc.2010.01.084.
  • 3. Akhtar, N. (2012). Microtubular, single-chamber solid oxide fuel cell (MT-SC-SOFC) stacks: Model development. Chem. Eng. Res. & Des. 90, 814–824. DOI: 10.1016/j.cherd.2011/09/013.
  • 4. Lee, S.B., Lim, T.H., Song, R.H., Shin, D.R. & Dong, S.K. (2008). Development of a 700 W anode-supported micro-tubular SOFC stack for APU applications. Inter. J. Hydrogen Energy. 33, 2330–2336. DOI: 10.1016/j.ijhydene.2008.02.034.
  • 5. Zeng, M., Yuan, J., Zhang, J., Sunden, B. & Wang, Q. (2012). Investigation of thermal radiation effects on solid oxide fuel cell performance by a comprehensive model. J. Pow. Sources. 206, 185–296. DOI: 10.1016/j. powsour.2012.01.130.
  • 6. Andersson, M., Yuan, J. & Sunden, B. (2012). SOFC modeling considering electrochemical reactions at the active three phase boundaries. Inter. J. Heat & Mass Transfer. 55, 773–788. DOI: 10.1016/j.ijheatmasstransfer.2011.10.032.
  • 7. Meier, Ch., Hocker, Th. Bieberle-Hutter, A. & Gauckler, L. (2012). Analyzing a micro-solid oxide fuel cell system by global energy balances. Inter. J. Hydrogen Energy. 37, 10318–10327. DOI: 10.1016/j.ijhydene.2012.04.009.
  • 8. Pianko-Oprych, P., Kasilova, E. & Jaworski, Z. (2013). Modelling of processes in a microtubular Solid Oxide Fuel Cell. Inż. Apar. Chem. 5, 462–464.
  • 9. Howe, K., Thompson, G.J. & Kendal, K. (2011). Micro-tubular solid oxide fuel cells and stacks. J. Pow. Sources, 196, 1677–1686. DOI: 10.1016/j.jpowsour.2010.09.043.
  • 10. Meadowcroft, A.D., Kendall, K., Kendall, M. (2013). Internal report on testing micro-tubular SOFCs in Unmanned Air Vehicles, SUAV project.
  • 11. Kupecki, J., Milewski, J. Jewulski, J. (2013). Investigation of SOFC material properties for plant-level modelling. Centr. Europ. J. Chem., 11, 5, 664–671.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-558c7e05-c92f-4743-bd1c-29d23c6e6f7a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.