Experimental study of the mechanical and corrosion properties of ethyl silicate resin applied on low carbon steel

• Autorzy: Ali M. , Mohmmed J.H. , Zainulabdeen A.A.

Identyfikatory

DOI

10.5604/01.3001.0015.0255

• Języki publikacji: EN

Abstrakty

EN

Purpose: This work aimed at evaluating the properties of the ethyl silicate-based coating that can be applied on low carbon steel. Design/methodology/approach: Two mixture ratio types (2:1, and 3:2) of resin and hardener respectively were used to prepared two specimen models (A and B). Findings: It found that some mechanical properties (tensile, hardness, and impact strength) of ethyl silicate resin were evaluated according to standard criteria. Research limitations/implications: The effect of heat treatments at various temperatures (100, 150, and 200°C) and holding at different times (10, 20 & 30) min on hardness was investigated. Practical implications: Moreover, an open circuit potential corrosion test with a solution of 3.5% Sodium Chloride at room temperature and 60°C was used to determine the corrosion resistance of low carbon steel specimens coated with the two mixture types. Originality/value: The effects of mixture ratios (for resin and hardener) and heat treatment conditions on properties of ethyl silicate-based coating were studied. From obtained results, acceptable values of tensile, hardness, and toughness were recorded. Increasing heat treatment temperature and holding time leads to enhance hardness for both model types. An open circuit potential (OCP) tests show that there is an enhancement of protective properties of ethyl silicate coatings with mixture type B in comparison with type A was achieved. Generally, the results indicate that specimen model B has higher properties as compared with specimen model A.

Słowa kluczowe

EN

ethyl silicate resin; polymer coating; low carbon steel

PL

żywica etylokrzemianowa; powłoka polimerowa; stal niskowęglowa

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2021
• Tom: Vol. 108, nr 2
• Strony: 68--74
• Opis fizyczny: Bibliogr. 17 poz.

Twórcy

autor

Ali M.

• Power Mechanics, Al-Furat Al-Awsat Technical University, Babylon Technical Institute, Iraq

• https://orcid.org/0000-0003-3785-6104

autor

Mohmmed J.H.

• Materials Engineering Department, University of Technology, Iraq

• https://orcid.org/0000-0002-2608-9176

autor

Zainulabdeen A.A.

• Materials Engineering Department, University of Technology, Iraq

Bibliografia

• [1] J.H. Mohmmed, A.H. Ataiwi, I.A. Mahmood, Factors Affecting the Glass-Ceramic Coating: Composition, Heat Treatment, and Mill Addition, Lap Lambert Academic Publishing, Moldova, 2012.
• [2] G. Parashar, D. Srivastava, P. Kumar, Ethyl silicate binders for high performance coatings, Progress in Organic Coatings 42/1-2 (2001) 1-14. DOI: https://doi.org/10.1016/S0300-9440(01)00128-X
• [3] A.A. Zainulabdeen, N.Y. Mahmood, J.H. Mohmmed, The effect of polymeric quenching media on mechanical properties of medium carbon steel, IOP Conference Series: Materials Science and Engineering 454/1 (2018) 012053. DOI: https://doi.org/10.1088/1757-899X/454/1/012053
• [4] A.H. Ataiwi, I.A. Mahmood, J.H. Mohmmed, Studying and modeling the effects of quartz addition and heat treatment on corrosion properties of ceramic coating, Engineering and Technology Journal 29/12 (2011) 2564-2579.
• [5] J.H. Mohmmed, A new high thermal shock resistant onelayer glass-ceramic coating for industrial and engineering applications, Journal of Achievements in Materials and Manufacturing Engineering 82/2 (2017) 70-76. DOI: https://doi.org/10.5604/01.3001.0010.2357
• [6] B.H. Dolph, An Evaluation of Ethyl Silicate-Based Grouts for Weathered Silicate Stones, PhD Thesis, UCLA, 2014.
• [7] M. Narisawa, H. Ukon, H. Mabuchi, K. Okamura, Y. Kurachi, SiC microsphere derived from phenolic resin - Ethyl silicate heterogeneous precursors with carbothermic reduction, Journal of Applied Polymer Science 94/4 (2004) 1612-1618. DOI: https://doi.org/10.1002/app.21082
• [8] H. Sarydikmen, N. Kushkonmaz, Microstructure and phase analysis of ethyl silicate-bonded alumina-zircon refractories, Refractories and Industrial Ceramics 46/3 (2005) 212-216. DOI: https://doi.org/10.1007/s11148- 005-0088-0
• [9] F. Hoshyargar, S. Ali Sherafati, M.M. Hashemi, A new study on binder performance and formulation modifica-tion of anti-corrosive primer based on ethyl silicate resin, Progress in Organic Coatings 65/3 (2009) 410-413. DOI: https://doi.org/10.1016/j.porgcoat.2009.02.006
• [10] N. Laura, S. Duchêne, V. Vergès-Belmin, C. Dandrel, D. Giovannacci, W. Nowik, Comparative in Situ study of nanolime, ethyl silicate and acrylic resin for consolida-tion of wall paintings with high water and salt contents at the chapter hall of Chartres cathedral, International Journal of Architectural Heritage 14/7 (2020) 1120-1133. DOI: https://doi.org/10.1080/15583058.2020.1731628
• [11] J.S. Pozo-Antonio, D. Noya, C. Montojo, Aesthetic effects on granite of adding nanoparticle TiO2 to Si-based consolidants (ethyl silicate or nano-sized silica), Coatings 10/3 (2020) 215. DOI: https://doi.org/10.3390/coatings10030215
• [12] O. Alhussein, E. Elgorashi, H. Bayahia, A Novel Method for Synthesis of Ethylsilicates and its Applications, Asian Journal of Chemistry 28/12 (2016) 2741-2744. DOI: https://doi.org/10.14233/ajchem.2016.20106
• [13] D.C. Bradley, R.C. Mehrotra, I.P. Rothwell, A. Singh, Alkoxo and Aryloxo Derivatives of Metals, Academic Press, London, 2001.
• [14] M. Ali, I. Alshalal, F.N. Al Zubaidi, A.R. Yousif, Improvement of Corrosion and Erosion Resistance Properties for Cast Iron, IOP Conference Series: Materials Science and Engineering 881/1 (2020) 012068. DOI: https://doi.org/10.1088/1757- 899X/881/1/012068
• [15] M. Ali, I. Alshalal, A.A. Abtan, A.R. Yousif, J.H. Mohmmed, Effect of Nano-Sized SiO2 Particles Addition on The Surface Roughness and Micro Hardness of Copper-Based Friction Materials, Journal of Mechanical Engineering Research and Developments 44/2 (2021) 104-111.
• [16] E. Akbarinezhad, H.R. Faridi, A. Ghanbarzadeh, Evaluation of zinc rich ethyl silicate primer by applying electrochemical methods, Surface Engineering 25/2 (2009) 163-166. DOI: https://doi.org/10.1179/026708408X375280
• [17] E. Akbarinezhad, M. Ebrahimi, F. Sharif, M.M. Attar, H.R. Faridi, Synthesis and evaluating corrosion protection effects of emeraldine base PAni/clay nanocomposite as a barrier pigment in zinc-rich ethyl silicate primer, Progress in Organic Coatings 70/1 (2011) 39-44. DOI: https://doi.org/10.1016/j.porgcoat.2010.09.016