Structure and properties of the tool ceramics with hard wear resistant coatings

• Autorzy: Pakuła D. , Staszuk M. , Gołombek K. , Śliwa A. , Mikuła J.

Identyfikatory

DOI

10.1515/amm-2016-0209

• Języki publikacji: EN

Abstrakty

EN

This work presents studies of the structure and functional properties of coatings deposited onto indexable inserts made of nitride and sialon tool ceramics with the required properties, i.e. high adhesion, niicrohardness. high resistance to abrasive and diffusion wear in working conditions of high-performance cuttings tools. In the present paper the results of the investigations of the structure, texture, mechanical and functional properties of the Ti(C,N), (Ti.Al)N, Ti(C.N)+(Ti,Al)N coatings were presented. The 80% increase in the hardness of the coatings in comparison to the substrate material was reported. Test coatings are characterized by good adhesion to the substrate. The maximum Lc load of (Ti A1)N coat applied to the substrate from the nitride ceramics is equal to 42 N. In the studied coatings compressive stresses were found. The results of mechanical properties investigations, especially tribological ones correlate with the results of exploitation tests carried out during the cutting test.

Słowa kluczowe

EN

PVD coatings; Nitride Tool Ceramics; Sialon Tool Ceramics

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1265--1270
• Opis fizyczny: Bibliogr.21 poz., rys., tab., wykr.

Twórcy

autor

Pakuła D.

• Silesian Uniyersity of Technology, Tnstitute Of Engineertng Materials And Bi0mater1als, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Staszuk M.

• Silesian Uniyersity of Technology, Tnstitute Of Engineertng Materials And Bi0mater1als, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Gołombek K.

• Silesian Uniyersity of Technology, Tnstitute Of Engineertng Materials And Bi0mater1als, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Śliwa A.

• Silesian Uniyersity of Technology, Tnstitute Of Engineertng Materials And Bi0mater1als, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Mikuła J.

• Silesian Uniyersity of Technology, Tnstitute Of Engineertng Materials And Bi0mater1als, 18A Konarskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] M. Oden, J. Aimer, G. Hakansson, M. Olsson, Thin Solid Films, 377-378. 407-412 (2000).
• [2] E. Broszeit, C. Friedrich, G. Berg. Surf. Coat. Techn. 115,9-16 (1999).
• [3] P. Bilek. P. Jurci, M. Hudakova, M. Paśak, M. Kusy, J. Bohovicova, Appl. Surf. Sci. 307, 13-19 (2014).
• [4] L. A. Dobrzański. D. Pakuła, J. Mikuła, K. Gołombek, Int. J. Surface Science and Engineering, 1 (1), 111-124 (2007).
• [5] LA. Dobrzański. D. Pakuła, Mater. Sci. Forum. 513, 119-133 (2006).
• [6] L. A. Dobrzański, M. Staszuk, K. Gołombek. A. Śliwa, M. Pancielejko. Arch. Metali. Mater. 55 (1), 187-193 (2010).
• [7] L. Cunha, L. Rebouta, F. Vaz. M. Staszuk. S. Malara, J. Barbosa, P. Carvalho, E. Alves, E. Le Bourhis, Ph. Goudeau, J. P. Riviere. Vacuum 82, 1428-1432 (2008).
• [8] T. Liu. C. Dong, S. Wu, K Tang, J. Wang, J. Jia. Surf. Coat. Tech. 201. 6737-6741 (2007).
• [9] Y. Birol, B. Yuksel, Surf. Coat. Tech. 207, 461-466 (2012).
• [10] G.G. Fuentes, E. Almandoz, R. Pierrugues, R. Martinez, R. J.Rodriguez. J. Caro, M. Vilaseca, Surf. Coat. Tech. 205, 1368- 1373 (2010).
• [11] M. Pancielejko, W. Precht, J. Mater. Process. Tech. 157-158. 394-298 (2004).
• [12] M. Basiaga, M. Staszuk, W. Walkę, Z. Opilski, Materialwissensch. Werkstofftech 47 (5), 1-9 (2016).
• [13] L. A. Dobrzański, M. Bonek, A. Klimpel, A. Lisiecki, Mater Sci. Forum. 437-438, 69-72 (2003).
• [14] A. Czyżniewski. W Gulbiński, G. Raduóczi, M. Szerencsi, M. Pancielejko, Surf. Coat. Tech. 205, 4471-4479 (2011).
• [15] L. A. Dobrzański, K. Lukaszkowicz. A. Kfiz. J. Mater. Process. Tech. 143-144, 832-837 (2003).
• [16] M. Bonek. G. Mamlą, LA. Dobrzański, Adv. Mat. Res. 291-294. 1365-1368 (2011).
• [17] K. Lukaszkowicz, A.Czyżniewski, W. Kwaśny, M. Pancielejko, Vacuum. 86. 1186-1194 (2012).
• [18] K. Labisz, Mat.-wiss. u. Werkstofftech. 45.314-324(2014).
• [19] T. Tański. J. Mech. Eng. 59 (3). 165-174 (2013).
• [20] W Kwaśny, Journal of Achievements in Materials and Manufacturing Engineering, 37 (2) 125-192 (2009).
• [21] J. A. Thornton, Journal of Vacuum Science and Technology. A4 (6), 3059-3065 (1986).

Uwagi

EN

This publication was financed by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering SUT