PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Stationary sonar for shallow water

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The aim of the paper is checking possibility of building active stationary sonar designed for work in very shallow water, depth 8 - 10 m. Sonar is designed for monitoring very weak and moving targets by TS about -20 dB at the range up to few hundred metres. This paper presents construction of wide-sector sonar consists of two linear transducers. Beampatterns of the transducers are adjusted to conditions existing in very shallow water, particularly to minimize bottom and surface reverberation and effect of multipath propagation. Below are presented results of tests and measurements made for different types of targets and different environmental conditions - including: state of the sea, strong aeration of the near surface water, and influence of different sound propagation conditions for detection of the targets. The paper contains results of influence few types of signal processing for improvement SNR, thus increasing probability of the targets detection.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
61--64
Opis fizyczny
Bibliogr. 3 poz., rys.
Twórcy
  • R&D Marine Technology Centre, Gdynia, Poland, 81-109 Gdynia, ul. Dickmana 62
  • R&D Marine Technology Centre, Gdynia, Poland, 81-109 Gdynia, ul. Dickmana 62
  • R&D Marine Technology Centre, Gdynia, Poland, 81-109 Gdynia, ul. Dickmana 62
Bibliografia
  • 1. Elminowicz A. .Jntruder detection active sonar" UDT Europe 1999, Nice, June 1999;
  • 2. Elminowicz A., Janowski T., Kotłowski A. .Active stationary sonar for very shallow waters", UDT Europe 2000, London, June 2000;
  • 3. Elminowicz A., Salamom R., Wojan Z., Lis W. .Hydroacoustics array beam patterm shaping by use of non-electronic methods" ECUA 2000, Vol 2, p. 1373 - 1378, Lyon, July 2000
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-54ab1174-01da-4395-9d4f-fe9b3fa1046b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.