The influence of the selected parameters of the mathematical model of steel continuous casting on the distribution of the solidifying strand temperature

• Autorzy: Falkus J. , Miłkowska-Piszczek K. , Rywotycki M. , Wielgosz E
• Języki publikacji: EN

Abstrakty

EN

Purpose: This paper presents the results of the numerical calculations concerning the influence of the placing of the developing gaseous gap in a mould based on the thickness of the forming shell, and the temperature distribution on the strand length. A cast slab with dimensions of 1100 mm x 220 mm was analysed. The calculations were performed on various heights of the formation of the gap in the mould. Other process parameters, i.e. the casting speed, melt temperature, and the cooling intensity in the secondary cooling zone, were maintained at a constant level. Design/methodology/approach: The numerical model of the steel continuous casting process, developed with the ProCAST software was used. In the study the effect of the height of the air gap development was examined for five variants. In the heat transfer in the gap model, two basic heat transfer mechanisms were assumed: by radiation and by conductivity. Findings: The numerical model of the steel continuous casting process with influence of the placing of the developing gaseous gap in a mould was developed. The verification of the calculation results obtained, after conducting a number or mathematical simulations, concerned the shell thickness and its dependence on the height of the air gap. The simulation of the temperature distribution was made for the whole strand. Research limitations/implications: The numerical model of the steel continuous casting process, with the curved mould should be used to determine the influence of the placing of the developing gaseous gap. Practical implications: The results of the numerical calculations with heat transfer model, concerning the influence of the placing of the developing gaseous gap in a mould based on the thickness of the forming shell, and the temperature distribution on the strand length. Orignality/value: The calculations were performed on various heights of the formation of the gap in the mould using ProCAST software. The calculated temperature distribution was verified on the basis of an industrial database.

Słowa kluczowe

EN

continuous casting of steel; numerical modelling; FEM

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2012
• Tom: Vol. 55, nr 2
• Strony: 668--672
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Falkus J.

• Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Miłkowska-Piszczek K.

• Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Rywotycki M.

• Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Wielgosz E

• Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] T. Telejko, Z. Malinowski, M. Rywotycki, Analysis of heat transfer and fluid flow in continuous steel casting, Archives of Metallurgy and Materials 54 (2009) 837-844.
• [2] Z. Malinowski, M. Rywotycki, T. Telejko, Modeling of heat transfer and fluid flow in continuous casting of steel, Proceedings of the 8th International Conference on Technology of Plasticity ICTP’2005, Verona, 2005, 753-754.
• [3] B.G. Thomas, Modeling of the continuous casting of steel - past, present and future, Metallurgical Transactions B 33/12 (2002) 795-812.
• [4] B. Mochnacki, The use of numerical methods in the thermal calculations of Steel Continuous Casting process, Archives
• [5] S. Louhenkilpi, E. Laitinen, R. Nieminen, Real - time simulation of heat transfer in continuous casting, Metallurgical Transactions B 24/8 (1993) 685-693.
• [6] L. Sowa, A. Bokota, Numerical model of thermal and flow phenomena the process growing of the CC slab, Archives of Metallurgy and Materials 56 (2011) 359-366.
• [7] A. Bokota, L. Sowa, Simulation of the solid chase growing in the system cast slab - continuous casting mould, Soldification of Metals and Alloys 40 (1999) 69-74 (in Polish).
• [8] J.K. Park, B.G. Thomas, I.V. Samarasekera, Analysis of thermomechnical behaviour in billet casting mould corner radii, Ironmaking and Steelmaking 29/5 (2002) 359-375.
• [9] Z. Malinowski, M. Rywotycki, Modeling of the strand and mold temperature in the continuous steel caster, Archives of Civil and Mechanical Engineering 9/2 (2009) 59-73.
• [10] M. Janik., H. Dyja, Modeling of three-dimensional temperature field inside the mould during continuous casting of steel, Journal of Materials Processing Technology 157-158 (2004) 177-182.
• [11] ProCAST - User Manual.
• [12] M. Alizadeh, H. Edris, A. Shafyei, Mathematical modeling of heat transfer for Steel Continuous Casting process, International Journal of ISSI 3/2 (2006) 7-16.
• [13] R. Forestier, F. Costes, O. Jaouen, M. Bellet, Finite element thermomechanical simulation of steel continuous casting, Proceedings of the 12th International Conference on “Modeling of Casting, Welding and Advanced Solidification Processes” MCWASP’2009, Vancouver and Alaska, S. Cockcroft, D. Maijer (Eds.), The Minerals, Metals and Materials Society, Warrendale, 2009, 295-302.
• [14] M. Rywotycki., K. Miłkowska-Piszczek, L. Trębacz, Identification of the boundary conditions in the continuous casting of steel, Archives of Metallurgy and Materials 57 (2012) 385-393.