The digitisation for the immediate dental implantation of incisors with immediate individual prosthetic restoration

• Autorzy: Dobrzański L. B. , Achtelik-Franczak A. , Dobrzańska J. , Dobrzański L. A.

Identyfikatory

DOI

10.5604/01.3001.0013.8541

• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of this study is to present the author's method of planning the procedure of immediate implant-prosthetic restoration in place of a tooth qualified for removal by performing a surgical template and implant-prosthetic restoration based on data obtained in the CBCT test and intraoral scanning 3D model. Design/methodology/approach: The method of planning the implant surgery through the design and manufacture of surgical templates and implant prostheses performed before the start of medical procedures was described on the basis of actual clinical data from patients with anterior segment teeth qualified for extraction for reasons of complications after endodontic treatment. The placement of the implant was planned using virtual reality, where the bone model and the virtual soft tissue model were combined, which made it possible to perform a surgical template and prosthetic implant restoration. For the manufacturing, 3D printing as stereolithography SLA and selective laser sintering SLS for the surgical template manufacturing and CNC milling in the case of the prosthetic implant were used for restoration. Findings: The method allows planning the implant position based on two connected bone and soft tissue models and allows to design and manufacture a surgical guide. In this way, it becomes possible to place implants in the patient's bone during surgery procedure in the planned position and to install the prosthetic implant restoration in the form of an individual abutment and a PMMA crown during the same procedure in the surgical part. Practical implications: Thanks to the method of computer-aided design/manufacturing CAD/CAM production of surgical templates and prosthetic restoration based only on digital models and the planned position of the implant, it is possible to carry out the procedure of immediate tooth extraction and replacement with permanent prosthetic restoration. The whole process is based on the CBCT test performed at the beginning. The presented method allows shortening the procedure time by four times and the rehabilitation time by 3-6 months when performing the procedure in a minimally invasive manner. Originality/value: This article presents the original design and production method of surgical guides. It allows for precise planning of the implant position and transfer of this data to the patient's mouth during the procedure, enabling permanent prosthetic restoration before starting medical procedures.

Słowa kluczowe

EN

surgical guide; immediate implant prosthetic restoration; individual abutments; dental implant; 3D printing; CNC milling; computed tomography with cone beam

PL

uzupełnienie protetyczne; łącznik; implant stomatologiczny; druk 3D; frezowanie CNC; stożkowa tomografia komputerowa

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2019
• Tom: Vol. 97, nr 2
• Strony: 57--68
• Opis fizyczny: Bibliogr. 34 poz., rys.

Twórcy

autor

Dobrzański L. B.

• Medical and Dental Engineering Center for Research, Design and Production ASKLEPIOS, ul. Królowej Bony 13 D, 44-100 Gliwice, Poland

autor

Achtelik-Franczak A.

• Medical and Dental Engineering Center for Research, Design and Production ASKLEPIOS, ul. Królowej Bony 13 D, 44-100 Gliwice, Poland

autor

Dobrzańska J.

• Medical and Dental Engineering Center for Research, Design and Production ASKLEPIOS, ul. Królowej Bony 13 D, 44-100 Gliwice, Poland

autor

Dobrzański L. A.

• Medical and Dental Engineering Center for Research, Design and Production ASKLEPIOS, ul. Królowej Bony 13 D, 44-100 Gliwice, Poland

Bibliografia

• [1] L.A. Dobrzański, L.B. Dobrzański, Approach to the design and manufacturing of prosthetic dental restorations according to the rules of the Industry 4.0 industrial revolution stage, (2020) (prepared for printing).
• [2] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, Why are Carbon-Based Materials Important in Civilization Progress and Especially in the Industry 4.0 Stage of the Industrial Revolution?, Materials Performance and Characterization 8/3 (2019) 337-370, DOI: https://doi.org/910.1520/MPC20190145.
• [3] L.A. Dobrzański, Effect of Heat and Surface Treatment on the Structure and Properties of the Mg-Al-Zn-Mn Casting Alloys, in: L.A. Dobrzański, G.E. Totten, M. Bamberger (Eds.), Magnesium and Its Alloys: Technology and Applications, CRC Press, Boca Raton, FL, 2019, 91-202.
• [4] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, Applications of Laser Processing of Materials in Surface Engineering in the Industry 4.0 Stage of the Industrial Revolution, Materials Performance and Characterization 8/6 (2019) 1091-1129, DOI: https://doi.org/10.1520/MPC20190203.
• [5] L.A. Dobrzański, Role of materials design in maintenance engineering in the context of industry 4.0 idea, Journal of Achievements in Materials and Manufacturing Engineering 96/1 (2019) 12-49, DOI: https://doi.org/10.5604/01.3001.0013.7932.
• [6] L.A. Dobrzański, L.B. Dobrzański, A.D. DobrzańskaDanikiewicz, Conventional and additive technologies for products manufacturing using powders of metals, their alloys and ceramics, Materials Performance and Characterization (2020) (prepared for printing).
• [7] L.A. Dobrzański, L.B. Dobrzański, Innovative Dental and Maxillo-Facial Implant-Scaffold Manufactured Using the Innovative Technology and Additive Computer-Aided Materials Design ADD-MAT, IMSKA-MAT project number POIR.01.01.000397/16-00, Medical and Dental Engineering Centre for Research, ASKLEPIOS, Gliwice, Poland, 2017-2021.
• [8] P. Malara, L.B. Dobrzański, Computer-aided design and manufacturing of dental surgical guides based on cone beam computed tomography, Archives of Materials Science and Engineering 76/2 (2015) 140149.
• [9] P. Malara, L.B. Dobrzański, Designing and manufacturing of implantoprosthetic fixed supra structures in edentulous patients on the basis of digital impressions, Archives of Materials Science and Engineering 76/2 (2015) 163-171.
• [10] I. Turkyilmaz, C. Corrigan Eskow, G. Soganci, CAD/CAM Technology in Implant Dentistry, in: I. Turkyilmaz (Ed.), Current Concepts in Dental Implantology, IntechOpen, 2015, 149-178, DOI: http://dx.doi.org/10.5772/59322.
• [11] P.B. Patel, Immediate Implantation in a Deficient Ridge: A Predictable Treatment Protocol, Dentistry Today March (2018), Available at: https://www.dentistrytoday.com/articles/10407.
• [12] S.J. Sadowsky (Ed.), Evidencebased Implant Treatment Planning and Clinical Protocols, Wiley Blackwell, 2017.
• [13] M. Beretta, P. Paolo Poli, C. Maiorana, Accuracy of computer-aided template-guided oral implant placement: a prospective clinical study, Journal of Periodontal and Implant 44 (2014) 184-193, DOI: http://dx.doi.org/10.5051/jpis.2014.44.4.184.
• [14] J.-L. Zadikian, J. Stojanovic, M.R. Perez, L. Zadikian, C. Zadikian, R. Trushkowsky, Immediate Placement of Dental Implants after Extractions and Immediate Loading of Complete Restorations of the Maxilla, Mandible and Full-Mouth: A Retrospective Consecutive Case Series on 122 Patients and 1042 Implants with up to 8 Year Follow Up Period, Clinics in Surgery Oral and Maxillofacial Surgery 2 (2017) Article 1846, Available at: http://www.clinicsinsurgery.com/full-text/cis-v2id1846.php.
• [15] K.S. Hassan, A.S. Alagl, Immediate Dental Implants and Bone Graft, in: I. Turkyilmaz (Ed.), Implant Dentistry The Most Promising Discipline of Dentistry, IntechOpen, 2011, 173-182, DOI: http://dx.doi.org/10.5772/16522.
• [16] B. Atalay, Immediate Implantation at Fresh Extraction Sockets, in: M.A. Almasri (Ed.), An Update of Dental Implantology and Biomaterial, IntechOpen, 2018, 1937, DOI: http://dx.doi.org/10.5772/intechopen.78969.
• [17] M. Sehgal, L. Puri, S. Yadav, P. Malhotra, S. Singh Phukela, B. Yadav, B. Raina, Immediate Dental Implants Enriched with L-PRF in the Esthetic Zone, Case Reports in Dentistry 2018 (2018) Article ID 9867402, DOI: https://doi.org/10.1155/2018/9867402.
• [18] M. Singh, L. Kumar, M. Anwar, P. Chand, Immediate dental implant placement with immediate loading following extraction of natural teeth, National Journal of Maxillofacial Surgery 6/2 (2015) 252-255, DOI: https://doi.org/10.4103/0975-5950.183864.
• [19] W. Becker, Immediate implant placement: treatment planning and surgical steps for successful outcomes, British Dental Journal 201/4 (2006) 199-205, DOI: https://doi.org/10.1038/sj.bdj.4813881.
• [20] H.-P. Weber, J. Cano, F. Bonino, Digital Implant Surgery, in: R. Masri, C.F. Driscoll (Eds.), Clinical Applications of Digital Dental Technology, Wiley Blackwell, 2015, 139-165.
• [21] G.A. Mandelaris, A.L. Rosenfeld, CAD/CAM Surgical Guidance Using Cone Beam Computed Tomography, in: D. Sarment (Ed.), Cone Beam Computed Tomography. Oral and Maxillofacial Diagnosis and Applications, Wiley Blackwell, 2014, 147-196.
• [22] L. Das, A. Sarkar, H. Pal, A. Adak, S. Saha, S. Sarkar, Rapid Prototyping: A Future of Modern Dentistry, IOSR Journal of Dental and Medical Sciences (IOSRJDMS) 18/4 (2019) 8-14, DOI: https://doi.org/10.9790/0853-1804090814.
• [23] C. Schmidleithner, D.M. Kalaskar, Stereolithography, in: D. Cvetkovi (Ed.), 3D Printing, IntechOpen, 2018, 3-22, DOI: http://dx.doi.org/10.5772/intechopen.78147.
• [24] M. Revilla-León, M. Özcan, Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry, Journal of Prosthodontics 28 (2019) 146158, DOI: https://doi.org/10.1111/jopr.12801.
• [25] D. Salem, M.H. Mansour, Surgical Guides for Dental Implants; a Suggested New Classification, Journal of Dentistry and Oral Health 6 (2019) 1-8, DOI: https://doi.org/10.17303/jdoh.2019.6.104.
• [26] K.M. D’Souza, M.A. Aras, Types of Implant Surgical Guides in Dentistry: A Review, Journal of Oral Implantology XXXVIII/Five (2012) 643-652, DOI: https://doi.org/10.1563/AAID-JOI-D-11-00018.
• [27] T. Toyoshima, H. Tanaka, M. Sasaki, E. Ichimaru, Y. Naito, Y. Matsushita, K. Koyano, S. Nakamura, Accuracy of implant surgery with surgical guide by inexperienced clinicians: an in vitro study, Clinical and Experimental Dental Research 1/1 (2015) 10-17, DOI: https://doi.org/10.1002/cre2.3.
• [28] H.A. Altug, M. encimen, A. Gulses, A Study of a Custom-Made Surgical Guide for Dental Implant Insertion in Free-End Saddle Sites, Oral Health and Dental Management 10/3 (2011) 152-157.
• [29] M.C. Suresh Sajjan, P.S. Yekula, S.S. Kovvuri, R.R. Venkata Alluri, A simple technique for fabrication of a surgical guide for predictable placement of dental implants, Journal of Dental Implants 7/1 (2017) 11-14, DOI: https://doi.org/10.4103/jdi.jdi_18_16.
• [30] E. Mumcu, G. Erdinc, Implant Abutment Selection Criteria, Acta Scientific Dental Sciences 2/8 (2018) 31-38.
• [31] H.R. Shafie (Ed.), Clinical and Laboratory Manual of Dental Implant Abutments, Wiley Blackwell, 2014.
• [32] I. Turkyilmaz, Restoring severely angled implants with custom abutments and a screw-retained fixed dental prosthesis, Journal of Dental Sciences 14 (2019) 107108, DOI: https://doi.org/10.1016/j.jds.2018.07.003.
• [33] T. Sumi, K. Takeshita, T. Takeichi, P.G. Coelho, R. Jimbo, Patient-Specific Gingiva-Colored Abutments: A Case Series, The International Journal of Periodontics & Restorative Dentistry 34/4 (2014) 469-475, DOI: https://doi.org/10.11607/prd.2071.
• [34] A.-R. Ketabi, S. Ketabi, B. Helmstädter, With Individualized Abutments to Achieve More Success in Implant Therapy, Dentistry 7/9 (2017) i102, DOI: https://doi.org/10.4172/2161-1122.1000i102.