Empirical assessment of the MAG welder's exposure to an electromagnetic field

• Autorzy: Michałowska Joanna , Przystupa Krzysztof , Krupski Piotr

Identyfikatory

DOI

10.15199/48.2020.12.48

Warianty tytułu

PL

Ocena empiryczna narażenia spawalnika pracującego w metodzie MAG na pole elektromagnetyczne

• Języki publikacji: EN

Abstrakty

EN

The papers presents the results of the electromagnetic field measurements at the welder’s workplace. Welding was carried out by means of the MAG (Metal Active Gas) method (according to PN-EN ISO 4063: 2002 standard). Measurements have been made of the ESM 100 meter working within from 5 Hz to 400 kHz frequency band. Results obtained were compared with the requirements of the current 2013/35/EU Directive.

PL

W pracy zaprezentowano wyniki pomiarów pola elektromagnetycznego na stanowisku pracy spawacza. Spawanie było wykonywane w metodzie MAG (Metal Active Gas), (zgodnie z normą PN-EN ISO 4063:2002). Pomiary prowadzono miernikiem ESM 100, pracującym w pasmie częstotliwości od 5 Hz do 400 kHz. Uzyskane wyniki porównano z obowiązującą dyrektywą 2013/35/UE.

Słowa kluczowe

EN

electromagnetic field; MAG welding; occupational exposure

PL

pole elektromagnetyczne; spawanie metodą MAG; ekspozycja zawodowa

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2020
• Tom: R. 96, nr 12
• Strony: 222--225
• Opis fizyczny: Bibliogr. 28 poz., rys., tab.

Twórcy

autor

Michałowska Joanna

• The Institute of Technical Sciences and Aviation, The State School of Higher Education in Chełm, Pocztowa 54, 22-100 Chełm

autor

Przystupa Krzysztof

• Lublin University of Technology, Mechanical Engineering Faculty, Department of Automation, ul. Nadbystrzycka 36, 20-618 Lublin

autor

Krupski Piotr

• Lublin University of Technology, Fundamentals of Technology Faculty, Nadbystrzycka 38A, 20-618 Lublin

Bibliografia

• [1] Andrzejczak K., Młyńczak M., Selech J., Computerization of operation process in municipal transport, Advances in Intelligent Systems and Computing, 2018, 13-22
• [2] Batyrbek A., Sanghoek K., Lok-won K., Seunghyun L., Electromagnetic Analysis of Vertical Resistive Memory with a Sub-nm Thick Electrode, Nanomaterials, 10(9), 2020, 16-34
• [3] Bieńkowsk i P., Podlaska J., Zubrzak B., Electromagnetic field in the environment − estimation methods and monitoring, Medycyna pracy, 70(5), 2020, 567-585
• [4] Drozdowski K., Tofil A., Gontarz A., Numerical and Experimental Study on Producing Aluminium Alloy 6061 Shafts by Cross Wedge Rolling Using a Universal Rolling Mill, Aircraft PRZEGLĄD ELEKTROTECHNICZNY, ISSN 0033-2097, R. 97 NR 12/2020 225 Engineering and Aerospace Technology, 2013, vol. 85, 6, 487- 492
• [5] Dyrektywa Parlamentu Europejskiego i Rady 2013/35/UE z dnia 26 czerwca 2013 r. w sprawie minimalnych wymagań w zakresie ochrony zdrowia i bezpieczeństwa dotyczących narażenia pracowników na zagrożenia spowodowane czynnikami fizycznymi (polami elektromagnetycznymi) (dwudziesta dyrektywa szczegółowa w rozumieniu art. 16 ust. 1dyrektywy 89/391/EWG) i uchylająca dyrektywę 2004/40/WE
• [6] Gas P., Wyszkowska J., Influence of multi-tine electrode configuration in realistic hepatic RF ablative heating, Archives of Electrical Engineering, 2019, vol. 68, no. 3, pp. 521–533. DOI: 10.24425/aee.2019.129339
• [7] Jun S., P rzystupa K., Beshley M., Wang J., Pieniak D., A cost-efficient software based router and traffic generator for simulation and testing of IP network, Electronics (Switzerland), 2020
• [8] Kowol P., Szczygiel M., Burlikowski W., Trawinski T., Electromagnetic Field Calculations of Multimodule Electromechanical Device for Drilling Process-Main Motor Calculations, Applications of Electromagnetics in Modern Techniques and Medicine (PTZE), 2018
• [9] Lonkwic P., Syta A., Nonlinear analysis of braking delay dynamics for the progressive gears in variable operating conditions, Journal of Vibroengineering, 2016
• [10] Józwik J., Tofil A., Michalowska J., Pytka J., Budzynski P., Korzeniewska E., Investigation of the effect of the measuring probe orientation on the wireless radio signal transmission in measurements on a CNC machine tool, Proceedings of the 2018 IEEE 4th International Symposium on Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems, IDAACS-SWS, 2018
• [11] Miaskowski A., Gas P., Krawczyk A., SAR Calculations for Titanium Bar-Implant Subjected to Microwave Radiation, in 2016 17th International Conference Computational Problems of Electrical Engineering (CPEE), IEEE Xplore, 2016, pp.1–4, art. no. 77387262016. DOI: 10.1109/CPEE.2016.7738726
• [12]Michałowska J., Tofil A., Józwik J., Pytka J., Legutko S., Siemiątkowski Z., Łukaszewicz A., Monitoring the Risk of the Electric Component Imposed on a Pilot During Light Aircraft Operations in a High-Frequency Electromagnetic Field, Sensors, 2019, vol. 19 Issue 24
• [13] Michałowska J., Mazurek P., Gad R., Chudy A., Kozieł J., Identification of the electromagnetic field strength in public spaces and during travel, Applications of Electromagnetics in Modern Engineering and Medicine (PTZE), 2019, 121-124
• [14] Mazurek P., Michałowska J., Kozieł J., Gad R., Wdowiak A., The intensity of electromagnetic fields in the range of GSM 900, GSM 1800 DECT, UMTS, WLAN in built-up areas , Przegląd elektrotechniczny, 12’1, 2018, 159-162
• [15] Mazurek P., Effect of working gas flow on conducted interferences in the ignition circuit of a threephase glidarc plasma reactor, Przegląd Elektrotechniczny, 2019, , R. 95 nr 3, 37-40
• [16] Mykyychuk M., Kochan R., Kochan O., Increasing Metrological Autonomy of In_Plant Measuring System, Advances in Science and Technology, Research Journal, 2016 vol.10, Issue: 32, 193-197
• [17] Przystupa K., Koziel J., Analysis of the quality of uninterruptible power supply using a UPS, Applications of Electromagnetics in Modern Techniques and Medicine, PTZE, 2018, 191-194
• [18] Przystupa K., Vasylkivskyi I., Ishchenko V., Pohrebennyk V., Kochan O. Electromagnetic pollution: Case study of energy transmission lines and radio transmission equipment, Przegląd Elektrotechniczny, 2020, R. 96 nr 2, 52-54
• [19] Przystupa, K., Pohrebennyk, V., Mitryasova, O., Kochan, O., Assessment of the Electromagnetic Radiation Level of vehicles, computers, household appliances, personal care products, mobile phones and smartphones depression, Przegłąd Elektrotechniczny, 2020, R. 96 nr 1, 190-193
• [20] Pater Z., Tofil , A., Tomc zak J., Steel Balls Forming by Cross Rolling with Upsetting, Metalurgija, 2013, vol 52, 1, 103 - 106
• [21] Pater Z., Tofil A., Tomczak, J., Bulzak , T , Numerical analysis of the cross wedge rolling process (CWR) for a stepped shaft, Metalurgija, 2015, 54(1), 177-180
• [22] Pytka, J., Józwik J., Budzyński P., Łyszczyka T., Tofil A., Gnapowski E., Laskowski J., Wheel dynamometer system for aircraft landing gear testing, Measurement, 2019, vol. 148,
• [23] Pytka J., Tarkowsk A., Budzynski P., Method for Testing and Evaluating Grassy Runway Surface, Journal of Aircraft, 2017, vol. 54 Issue: 1, 229-234
• [24] Su J ., Kochan O., Common mode noise rejection in measuring channels, Instrument and Experimental Techniques, (2015) vol. 58, Issue: 1, 86-89
• [25] Tofil A., Tomczak J., Bulzak T., Numerical and Experimental Study on Producing Aluminium Alloy 6061 Shafts by Cross Wedge Rolling Usung a Universal Rolling Mill, Archives of Metallurgy and Materials, 2015, vol 60, 2, 801-807
• [26] Wang J., Kochan O., Przystupa K., Informationmeasuring System to Study the Thermocouple with Controlled Temperature Field, Measurement Science Review, 2019
• [27] Wyszkowska J., Szczygieł M., Trawiński T., Static magnetic field and extremely low-frequency magnetic field in hybrid and electric vehicles, Przegląd Elektrotechniczny, 2020 R. 96 nr 2, 60-62
• [28] Zhi-peng X., Chun-xue W., Yue Y., Peng-Peng W., Hong-Yu Z., Yuan-Yuan S., Ming L., Ze-yong L., Integrated optomechanical analyses and experimental verification for a thermal system of an aerial camera, Applied Optics, 2019, 58(26):6996

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).