Comparative analysis of heat release in a reciprocating engine powered by a regular fuel with pyrolysis oil addition

• Autorzy: Chwist Mariusz

Identyfikatory

DOI

10.19206/CE-146694

• Języki publikacji: EN

Abstrakty

EN

The article presents a comparative analysis of heat release rate in a spark-ignition engine powered by various fuels as follows: butanol, gasoline, a mixture of butanol with tire pyrolysis oil (TPO), and mixtures of butanol with oil from biomass pyrolysis (BPO). Selected combustion phases were analyzed. Additionally, ignition delay calculations were performed in the ANSYS Chemkin Pro program for the surrogates of the tested fuels. Popular surrogates quoted in numerous publications were used as substitute fuels. The paper presents an original surrogate of oil from tire pyrolysis.

Słowa kluczowe

EN

pyrolysis oil; butanol; ignition delay; surrogates; Ansys Chemkin-Pro

PL

olej pirolityczny; butanol; opóźnienie zapłonu; surogat; Ansys Chemkin-Pro

• Wydawca: Polskie Towarzystwo Naukowe Silników Spalinowych
• Czasopismo: Combustion Engines
• Rocznik: 2022
• Tom: R. 61, nr 3
• Strony: 104--112
• Opis fizyczny: Bibliogr. 20 poz., fot. kolor., wykr.

Twórcy

autor

Chwist Mariusz

• PhD student in Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology

• https://orcid.org/0000-0003-1046-6755

Bibliografia

• [1] ALKHATIB, R. Development of an alternative fuel from waste of used tires by pyrolysis. Environmental Engineering. 2014. Ecole des Mines de Nantes.
• [2] BOGARRA-MACIAS, M., DOUSTDAR, O., FAYAD, M.A. et al. Performance of a drop-in biofuel emulsion on a single-cylinder research diesel engine. Combustion Engines. 2016, 166(3), 9-16. http://doi.org/10.19206/CE-2016-324
• [3] CHWIST, M., PYRC, M., GRUCA, M. et al. By-products from thermal processing of rubber waste as fuel for the internal combustion piston engine. Combustion Engines. 2020, 181(2), 11-18. https://doi.org/10.19206/CE-2020-202
• [4] CHWIST, M., SZWAJA, S., GRAB-ROGALIŃSKI, K. et al. Bio-oil blended butanol as a fuel to the spark ignition internal combustion reciprocating engine. Combustion Engines. 2017, 169(2), 93-96. https://doi.org/10.19206/CE-2017-216
• [5] HEYWOOD, J.B. Internal Combustion Engine Fundamentals. Mcgraw-Hill College. 1988.
• [6] JUMA, M., KORENOVA, Z., MARKOS, J. et al. Pyrolysis and combustion of Scrap tire. Petroleum & Coal. 2006, 48(1), 15-26.
• [7] KARDAŚ, D., KLUSKA, J., KLEIN, M. et al. Modelowe kompleksy agroenergetyczne: Teoretyczne i eksperymentalne aspekty pirolizy drewna i odpadów. Wydawnictwo UWM. 2014.
• [8] KOLODZIEJ, C.P., WALLNER, T. Combustion characteristics of various fuels during research octane number testing on an instrumented CFR F1/F2 engine. Combustion Engines. 2017, 171(4), 164-169. https://doi.org/10.19206/CE-2017-427
• [9] KOMENDA, P. Analiza procesu termicznej przeróbki biomasy. 2019. Monografie nr 154. Wydawnictwo PAN. Komitet Inżynierii Środowiska. Warszawa.
• [10] KRUGER, C. Evaluation of pyrolysis with LCA 3 - case studies, BASF SE, 31.07.2021.
• [11] LEHTO, J., OASMAA, A., SOLANTAUSTA, Y. et al. Fuel oil quality and combustion of fast pyrolysis bio-oils. VTT Technology. 2013. 87, 79.
• [12] MAURO, S., SENER, R., GÜL, Z.M. et al. Internal combustion engine heat release calculation using single-zone and CFD 3D numerical models. International Journal of Energy and Environmental Engineering. 2018, 9, 215-226. http://doi.org/10.1007/s40095-018-0265-9
• [13] MIKULSKI, M., AMBROSEWICZ-WALACIK, M., HUNICZ, J. et al. Combustion engine applications of waste tire pyrolytic oil. Progress in Energy and Combustion Science. 2021, 85, 100915. https://doi.org/10.1016/j.pecs.2021.100915
• [14] MORGAN, N., SMALLBONE, A., BHAVE, A. et al. Mapping surrogate gasoline compositions into RON/MON space. Combustion and Flame. 2010, 157, 6. https://doi.org/10.1016/j.combustflame.2010.02.003
• [15] OASMAA, A., OHRA-AHO, T., LINDFORS, C. Physico-chemical properties of FPBO. D3.3. Renewable residential heating with fast pyrolysis bio-oil report, VTT, 2017.
• [16] RANZI, E., FRASSOLDATI, A., STAGNI, A. et al. Reduced kinetic schemes of complex reaction systems. Fossil and biomass-derived transportation fuels. International Journal of Chemical Kinetics. 2014, 46(9), 512-542. https://doi.org/10.1002/kin.20867
• [17] SAJDAK, M., MUZYKA, R. Use of plastic waste as a fuel in the co-pyrolysis of biomass. Part I. The effect of the addition of plastic waste on the process and products. Journal of Analytical and Applied Pyrolysis. 2014, 107, 267-275. https://doi.org/10.1016/j.jaap.2014.03.011
• [18] SIERADZKA, M., RAJCA, P., ZAJEMSKA, M. et al. Prediction of gaseous products from refuse derived fuel pyrolysis using chemical modelling software - Ansys Chemkin-Pro. Journal of Cleaner Production. 2020, 248, 119277. https://doi.org/10.1016/j.jclepro.2019.119277
• [19] SZWAJA, M., CHWIST, M., SZWAJA, S. et al. Impact of pyrolysis oil addition to ethanol on combustion in the internal combustion spark ignition engine. Clean Technologies. 2021, 3(2), 450-461. https://doi.org/10.3390/cleantechnol3020026
• [20] UCAR, S., KARAGOZ, S., OZKAN, A.R. et al. Evaluation of two different scrap tires as hydrocarbon source by pyrolysis. Fuel. 2005, 84, 1884-1892. https://doi.org/10.1016/j.fuel.2005.04.002

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).