Development of thermal runaway emissions aftertreatment system (TREAS) of lithium ion batteries

• Autorzy: Darnikowski Daniel

Identyfikatory

DOI

10.58139/v2q1-r455

• Języki publikacji: EN

Abstrakty

EN

Lithium-ion batteries are one of the most cost effective portable energy containers. The fire incident involving such battery (often referred as "thermal runaway"), however, poses a great danger to the surrounding, particularly in the matter of emitted substances and their toxicity for human body. The substances found are carbon monoxide and dioxide, hydrogen and hydrogen uoride. Filtration of these substances may be achieved with dry sorbent injection method, which uses calcium hydroxide. Dry injection filtering prototype is manufactured and tested against thermal runaway of the NCM cells. Following parameters are analysed: air flow, sorbet transport, air temperature of the flue gas and concentrations of the substances. Estimated filtering performance of the dry sorbent injection and air dilution at a flow rate of 1600 m3/h and dosage of 1.8 g/s of calcium hydroxide is 99% for HF and 89% for CO2. NMC cell gas production per Wh were respectively 1060.3 mg of CO2 and 11.8 mg of H2. Air speed of above 5 m/s was found sufficient to transfer the sorbent power from the hopper's inlet.

Słowa kluczowe

EN

lithium-ion; aftertreatment; thermal runaway; emissions; LIB

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN
• Czasopismo: Transactions of the Institute of Fluid-Flow Machinery
• Rocznik: 2023
• Tom: nr 142
• Strony: 47--59
• Opis fizyczny: Bibliogr. 44 poz., rys., tab.

Twórcy

autor

Darnikowski Daniel

• Maritime Advanced Research Centre, Szczeci´nska 65, 80-392 Gda´nsk, Poland
• Institute of Fluid-Flow Machinery, Polish Academy of Sciences 14 Fiszera Street, 80-231, Gdansk, Poland

Bibliografia

• [1] X. Feng, M. Ouyang, X. Liu, L. Lu, Y. Xia, and X. He, “Thermal runaway mechanism of lithium ion battery for electric vehicles: A review,” Energy Storage Materials, vol. 10, pp. 246–267, 2018.
• [2] M. Ahrens, “Vehicle fires 2020,” report, National Fire Protection Association, 2020.
• [3] Deloitte, “2020 global automotive consumer study,” report, Deloitte, 2020. [Online; accessed 14 February 2022].
• [4] D. Darnikowski, M. Mieloszyk, and M. Weryk, “Fire resistance of construction elements,” in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2022, vol. 12046, pp. 203–218, SPIE, 2022.
• [5] A. Dorsz and M. Lewandowski, “Analysis of fire hazards associated with the operation of electric vehicles in enclosed structures,” Energies, vol. 15, p. 11, Dec 2021.
• [6] Y. Chen, Y. Kang, Y. Zhao, L. Wang, J. Liu, Y. Li, Z. Liang, X. He, X. Li, N. Tavajohi, and B. Li, “A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards,” Journal of Energy Chemistry, vol. 59, pp. 83–99, 2021.
• [7] H. Li, Q. Duan, C. Zhao, Z. Huang, and Q. Wang, “Experimental investigation on the thermal runaway and its propagation in the large format battery module with li (ni1/3co1/3mn1/3) o2 as cathode,” Journal of hazardous materials, vol. 375, pp. 241–254, 2019.
• [8] Q. Wang, P. Ping, X. Zhao, G. Chu, J. Sun, and C. Chen, “Thermal runaway caused fire and explosion of lithium ion battery,” Journal of power sources, vol. 208, pp. 210–224, 2012.
• [9] D. Darnikowski, “Fire resistance test methods of battery energy storage systems (bess): analysis, comparison and prospects,” in Selected Problems in Mechanical Engineering 2022 (M. Mieloszyk and T. Ochrymiuk, eds.), Gdansk, Poland: Wydawnictwo Instytutu Maszyn Przeplywowych PAN, 2022.
• [10] A. Börger, J. Mertens, and H. Wenzl, “Thermal runaway and thermal runaway propagation in batteries: What do we talk about?,” Journal of Energy Storage, vol. 24, p. 100649, 2019.
• [11] M. Ghiji, V. Novozhilov, K. Moinuddin, P. Joseph, I. Burch, B. Suendermann, and G. Gamble, “A review of lithium-ion battery fire suppression,” Energies, vol. 13, no. 19, 2020.
• [12] C. Un and K. Aydın, “Thermal runaway and fire suppression applications for different types of lithium ion batteries,” Vehicles, vol. 3, no. 3, pp. 480–497, 2021.
• [13] S. Ubaldi, C. Di Bari, A. De Rosa, M. Michele, and P. Russo, “Investigation on effective fighting technology for lib fire,” Chemical Engineering Transactions, vol. 91, pp. 505–510, 2022.
• [14] D. Darnikowski and M. Mieloszyk, “Investigation into the lithium-ion battery fire resistance testing procedure for commercial use,” Batteries, vol. 7, no. 3, p. 44, 2021.
• [15] N. Omar, M. Daowd, O. Hegazy, G. Mulder, J.-M. Timmermans, T. Coosemans, P. Van den Bossche, and J. Van Mierlo, “Standardization work for bev and hev applications: Critical appraisal of recent traction battery documents,” Energies, vol. 5, no. 1, pp. 138–156, 2012.
• [16] F. Larsson, P. Andersson, P. Blomqvist, and B.-E. Mellander, “Toxic fluoride gas emissions from lithium-ion battery fires,” Scientific reports, vol. 7, no. 1, pp. 1–13, 2017.
• [17] E. C. for Europe of the United Nations, “Global technical regulation on the electric vehicle safety (evs),” regulation, Mar. 2016.
• [18] “Regulation no 100 revision 02 - uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train,” tech. rep., Economic Commission for Europe of the United Nations, Aug. 2013.
• [19] “Regulation no 100 revision 03 - uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train,” tech. rep., Economic Commission for Europe of the United Nations, Aug. 2021.
• [20] “Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 3: Safety performance requirements,” standard, International Organization for Standardization, Geneva, CH, May 2014.
• [21] “Electrically propelled road vehicles - Safety specifications - Part 1: Rechargeable energy storage system (RESS),” standard, International Organization for Standardization, Geneva, CH, Apr. 2019.
• [22] “Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems,” standard, International Organization for Standardization, Geneva, CH, Apr. 2017.
• [23] “Electric and Hybrid Electric Vehicle Rechargeable Energy Storage System (RESS) Safety and Abuse Testing,” standard, Society of Automotive Engineers, Warrendale, US, Apr. 2009.
• [24] “Lithium-ion traction battery pack and system for electric vehicles - Part 3:Safety requirements and test methods,” standard, Standardization Administration of the People’s Republic of China, Shenzhen, CN, May 2015.
• [25] “Recommended Practices for Abuse Testing Rechargeable Energy Storage Systems (RESSs),” standard, Sandia National Laboratories, Albuquerque, US, July 2017.
• [26] “Batteries for Use In Electric Vehicles,” standard, Underwriters Laboratories, Northbrook, US, Mar. 2020.
• [27] L. Zhao, I. Watanabe, T. Doi, S. Okada, and J. ichi Yamaki, “Tg-ms analysis of solid electrolyte interphase (sei) on graphite negative-electrode in lithium-ion batteries,” Journal of Power Sources, vol. 161, no. 2, pp. 1275–1280, 2006.
• [28] H. Yang, H. Bang, K. Amine, and J. Prakash, “Investigations of the exothermic reactions of natural graphite anode for li-ion batteries during thermal runaway,” Journal of the Electrochemical Society, vol. 152, no. 1, p. A73, 2004.
• [29] G. Gachot, P. Ribiére, D. Mathiron, S. Grugeon, M. Armand, J.-B. Leriche, S. Pilard, and S. Laruelle, “Gas chromatography/mass spectrometry as a suitable tool for the liion battery electrolyte degradation mechanisms study,” Analytical chemistry, vol. 83, no. 2, pp. 478–485, 2011.
• [30] B. Mao, H. Chen, Z. Cui, T. Wu, and Q. Wang, “Failure mechanism of the lithium ion battery during nail penetration,” International Journal of Heat and Mass Transfer, vol. 122, pp. 1103–1115, 2018.
• [31] X. Feng, X. He, M. Ouyang, L. Lu, P. Wu, C. Kulp, and S. Prasser, “Thermal runaway propagation model for designing a safer battery pack with 25 ah linixcoymnzo2 large format lithium ion battery,” Applied energy, vol. 154, pp. 74–91, 2015.
• [32] H. Arai, M. Tsuda, K. Saito, M. Hayashi, and Y. Sakurai, “Thermal reactions between delithiated lithium nickelate and electrolyte solutions,” Journal of The Electrochemical Society, vol. 149, no. 4, p. A401, 2002.
• [33] J. Li, Z. Zhang, X. Guo, and Y. Yang, “The studies on structural and thermal properties of delithiated lixni1/3co1/3mn1/3o2 (0 ¡ x ? 1) as a cathode material in lithium ion batteries,” Solid State Ionics, vol. 177, no. 17-18, pp. 1509–1516, 2006.
• [34] P. Ping, D. Kong, J. Zhang, R. Wen, and J. Wen, “Characterization of behaviour and hazards of fire and deflagration for high-energy li-ion cells by over-heating,” Journal of Power Sources, vol. 398, pp. 55–66, 2018.
• [35] A. Nedjalkov, J. Meyer, M. K¨ohring, A. Doering, M. Angelmahr, S. Dahle, A. Sander, A. Fischer, and W. Schade, “Toxic gas emissions from damaged lithium ion batteries - analysis and safety enhancement solution,” Batteries, vol. 2, no. 1, p. 5, 2016.
• [36] V. Somandepalli, K. Marr, and Q. Horn, “Quantification of combustion hazards of thermal runaway failures in lithium-ion batteries,” SAE International Journal of Alternative Powertrains, vol. 3, no. 1, pp. 98–104, 2014.
• [37] A. W. Golubkov, D. Fuchs, J. Wagner, H. Wiltsche, C. Stangl, G. Fauler, G. Voitic, A. Thaler, and V. Hacker, “Thermal-runaway experiments on consumer li-ion batteries with metal-oxide and olivin-type cathodes,” Rsc Advances, vol. 4, no. 7, pp. 3633– 3642, 2014.
• [38] A. Dal Pozzo, R. Moricone, A. Tugnoli, and V. Cozzani, “Experimental investigation of the reactivity of sodium bicarbonate toward hydrogen chloride and sulfur dioxide at low temperatures,” Industrial & Engineering Chemistry Research, vol. 58, no. 16, pp. 6316–6324, 2019.
• [39] G. Hunt and M. Sewell, “Utilizing dry sorbent injection technology to improve acid gas control,” in Air and Waste Management Association - International Conference on Thermal Treatment Technologies and Hazardous Waste Combustors, pp. 144–156, 2015.
• [40] Y. Kong and H. Davidson, “Dry sorbent injection of sodium sorbents for so2, hcl and mercury mitigation,” in North American Waste-to-Energy Conference, vol. 43932, pp. 317–320, 2010.
• [41] R. K. Srivastava, W. Jozewicz, and C. Singer, “So2 scrubbing technologies: a review,” Environmental Progress, vol. 20, no. 4, pp. 219–228, 2001.
• [42] D. Schmal, A. Ligtvoet, and A. Brunia, “Some physico-chemical aspects of dry sorbent injection for removal of hci and hf from waste incinerator flue gases,” JAPCA, vol. 39, no. 1, pp. 55–57, 1989.
• [43] P. Parandoush and D. Lin, “A review on additive manufacturing of polymer-fiber composites,” Composite Structures, vol. 182, pp. 36–53, 2017.
• [44] T. Cai, P. Valecha, V. Tran, B. Engle, A. Stefanopoulou, and J. Siegel, “Detection of li-ion battery failure and venting with carbon dioxide sensors,” eTransportation, vol. 7, p. 100100, 2021