Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Purpose: This research conducted to analyse the effect of shot peening on surface structure, hardness, and resistance to corrosion of AISI 316L. Design/methodology/approach: The shot peening process is carried out on the surface of 316L stainless steel samples with four peening durations, and they are 2, 4, 15, and 30 minutes. Shot ball steel with diameter 0.4 mm for metal shot blasting and model S110 of ISO 11124/3 and SAEJ827, with the chemical composition, are C (0.8-1.2 wt.%), Mn (0.6-1.2 wt.%), Si (min. 0.4 wt.%), S (max. 0.05 wt.%), P (max. 0.05 wt.%), with a hardness of steelball, about 40-50 HRC. The pressure of compressor kept constant at 8 bar with a diameter of the nozzle is 5 mm, and the distance between the nozzle and the sample surface variated by 6 cm and 12 cm for each shooting duration. Findings: The result shows that the shot peening increases the surface hardness of the material, changes the microstructure on the surface layer and increases the resistance to corrosion. Shot peening with 30 minutes of shooting duration and 6 cm of shooting distance can improve the metal surface properties, which has a surface hardness of 772.23 HV and good on corrosion resistance. Research limitations/implications: The results of this experiment show that shot peening distance of 6 cm for 30 minutes achieved the highest surface hardness of AISI 316L. The corrosion rate decline with increasing duration and nearer distance of shooting balls. Practical implications: In the development of the implant material, AISI 316L need to be improved, its material properties, so it can be used safely and compatibly. Shot peening is a cold working process of metal to increase the material properties by shooting the steel ball into the surface of a material. Originality/value: Based on the experimental results it was obtained that variations shot peening distance and shot peening duration can change grain morphologies, subsequently affect hardness and corrosion resistance on AISI 316L.
Wydawca
Rocznik
Tom
Strony
19--26
Opis fizyczny
Bibliogr. 20 poz., rys.
Twórcy
autor
- Department of Mechanical and Industrial Engineering, Univeristas Gadjah Mada (UGM), Jln. Grafika No.2, Yogyakarta, 55281, Indonesia
autor
- Department of Mechanical Engineering and Industrial Engineering, Syiah Kuala University, Jln. Syech Abd. Rauf., No.7, Darussalam, Banda Aceh, 23111, Indonesia
autor
- Department of Mechanical and Industrial Engineering, Univeristas Gadjah Mada (UGM), Jln. Grafika No.2, Yogyakarta, 55281, Indonesia
Bibliografia
- [1] A.A. Ahmed, M.Mhaed, M. Wollmann, L. Wagner, The effect of shot peening parameters and hydroxyapatite coating on surface properties and corrosion behavior of medical grade AISI 316L stainless steel, Surface & Coating Technology 280 (2015) 160-167.
- [2] J. Biehler, H. Hoche, M. Oechsner, Corrosion properties of polished and shot-peened austenitic stainless steel 304L and 316L with and without plasma nitriding, Surface & Coating Technology 313 (2017) 40-46.
- [3] R. Seddik, A. Bahlou, A. Ating, R. Fathallah, A simple methodology to optimize shot-peening process parameters using finite element simulations, The International Journal of Advanced Manufacturing Technology 90/5-8 (2017) 2345-2361.
- [4] S. Manchoul, R. Seddik, R. Grissa, R. Ben Sghaier, R. Fathallah, A predictive approach to investigate the effect of ultrasonic shot peening on a high-cycle fatigue performance of an AISI 316L target, The International Journal of Advanced Manufacturing Technology 95 (2018) 3437-3451.
- [5] P.K. Rai, V. Pandey, K. Chattopadhyay, L.K. Singhal, V. Singh, Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel, Journal of Materials Engineering and Performance 23/11 (2014) 4055-4064.
- [6] V. Singh, V. Pandey, S. Kumar, N.C.S. Srinivas, K. Chattopadhyay, Effect of Ultrasonic Shot Peening on Surface Microstructure and Fatigue Behavior of Structural Alloys, Transactions of the Indian Institute of Metals 69/2 (2016) 295-301.
- [7] P.T. Iswanto, H. Akhyar, V. Malau, Suyitno, R. Wirawan, Effect of T6 Heat Treatment and Artificial Aging on Mechanics and Fatigue Properties of A356.0 Aluminum Alloy Produced by 350 rpm Centrifugal Casting, Proceedings of the 6th International Annual Engineering Seminar “InAES”, 2016, Yogyakarta, Indonesia, 1-5, 978-1-5090-0741-7/16/IEEE.
- [8] S. Kalainathan, S. Sathyajith, S. Swaroop, Efect of laser shot peening without coating on the surface properties and corrosion behavior of 316L steel, Optics and Lasers in Engineering 50 (2012) 1740-1745.
- [9] A.A. Ahmed, M.Mhaed, M. Wollmann, L. Wagner, Effect of surface and bulk plastic deformations on the corrosion resistance and corrosion fatigue performance of AISI 316L, Surface & Coatings Technology 259 (2014) 448-455.
- [10] M.R. Menezes, C. Godoy, V.T.L. Buono, M.M.M. Schvartzman, J.C.A. Wilson, Effect of shot peening and treatment temperature on wear and corrosion resistance of sequentially plasma treated AISI 316L steel, Surface & Coatings Technology 309 (2017) 651-662.
- [11] E. Agyenim-Boateng, S. Huang, J. Sheng, G. Yuan, Z. Wang, J. Zhou, A. Feng, Influence of laser peening on the hydrogen embrittlement resistance of 316L stainless steel, Surface & Coatings Technology 328 (2017) 44-53.
- [12] P. Peyre, C. Carboni, P. Forget, G. Beranger, C. Lemaitre, D. Stuart, Influence of thermal and mechanical surface modifications induced by laser shock processing on the initiation of corrosion pits in 316L stainless steel, Journal of Materials Science 42/16 (2007) 6866-6877.
- [13] S. Bagherifard, D.J. Hickey, S. Fintová, F. Pastorek, I. Fernandez-Pariente, M. Bandini, T.J. Webster, M. Guagliano, Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion alloy AZ31, Acta Biomaterialia 66 (2018) 93-108.
- [14] M. Sugavaneswaran, A.V. Jebaraj, M.D. Barath Kumar, K. Lokesh, A.J. Rajan, Enhancement of surface characteristic of direct metal laser sintered stainless steel 316L by shot peening, Surface and Interfaces 12 (2018) 31-40.
- [15] P.T. Iswanto, H. Akhyar, F.F. Utomo, Effect of shot peening at different almen intensities on fatigue behavior of AISI 304, Metalurgija 57/4 (2018) 295-298.
- [16] W. Zhanga, Y. Liu, J. Yanga, J. Dang, H. Xu, Z. Du, Effects of Sc content on the microstructure of As-Cast Al.-7 wt.% Si alloys, Materials Characterization 66 (2011) 104-110.
- [17] J. Congleton, W. Zheng, H. Hua, Stress corrosion cracking of annealed type 316 stainless steel in high-temperature water, Corrosion 46 (1990) 621-627.
- [18] Y. Hao, B. Deng, C. Zhong, Y. Jiang, J. Li, Effect of surface mechanical attrition treatment on corrosion behavior of 316 stainless steel, Journal of Iron and Steel Research, International 16/2 (2009) 68-72.
- [19] C. Müller-Bollenhagen, M. Zimmermann, H.-J. Christ, Very high cycle fatigue behavior of austenitic stainless steel and the effect of strain-induced martensite, International Journal of Fatigue 32/6 (2010) 936-942.
- [20] I. Altenberger, B.U. Scholtes, H. Martin, H. Oettel, Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304, Material science and Engineering A 265 (1999) 1-16.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-520b808c-46d2-4c21-9eb2-40a0017e8e0d