PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of burnt clay brick salinity on moisture content evaluated by non-destructive electric methods

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper presents the results of tests of mass moisture content in saline burnt solid clay brick by the non-destructive dielectric, resistance and microwave methods. Several groups of bricks, kept in respectively aqueous nitrate, chloride and sulphate media varying in their ion content, and in salt-free water (as the reference) were subjected to tests. It is shown that brick salinity considerably influences the indications of the dielectric meter and the resistance meter and this influence is similar for different salt concentrations, resulting in the significant overrating of the evaluated moisture content relative to the real moisture content. It is also shown that brick salinity has little influence on the indications of the microwave meter. The test results were generalized by determining appropriate correlations between mass moisture content Um and indications X of the dielectric, resistance and microwave meters, to be used in building practice.
Rocznik
Strony
101--111
Opis fizyczny
Bibliogr. 39 poz., rys., tab., wykr.
Twórcy
  • Wrocław University of Technology, Faculty of Civil Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
autor
  • Wrocław University of Technology, Faculty of Civil Engineering, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
Bibliografia
  • [1] A. Hola, Investigations of moisture build-up in historic half-timbered church, Materialy Budowlane 12 (2013) 65–67 (in Polish).
  • [2] A. Hola, Z. Matkowski, Non-destructive testing of damp vault brickwork in a Gothic-Renaissance City Hall, in: Proceedings of: 11th European Conference on Non-Destructive Testing, Prague, Czech Republic, 2014, 1–7.
  • [3] J. Adamowski, J. Hola, Z. Matkowski, Probleme und Loesungen beim Feuchtigkeitsschutz des Mauerwerks von Baudenkmaelern am Beispiel zweier grosser Barockbauten in Wroclaw, Bautechnik 82 (7) (2005) 426–433.
  • [4] A. Hola, K. Schabowicz, Moisture build-up in masonry walls in complex of new residential buildings, Materialy Budowlane 7 (2011) 82–84 (in Polish).
  • [5] E. Rirsch, Z. Zhang, Rising damp in masonry walls and the importance of mortar properties, Construction and Building Materials 24 (2010) 1815–1820.
  • [6] I. Torres, V. Peixoto de Freitas, The influence of the thickness of the walls and their properties on the treatment of rising damp in historic buildings, Construction and Building Materials 24 (2010) 1331–1339.
  • [7] Z. Suchorab, M. Jarmula, H. Sobczuk, Z. Pavlik, R. Cerny, Application of TDR method to measurement of capillary rise in model wall made of solid burnt clay bricks, Proceedings of EcOpole 3 (1) (2009) 207–213 (in Polish).
  • [8] A. Alsabry, Dynamics of capillary rise in building walls, Przeglad Budowlany 9 (2010) 46–48 (in Polish).
  • [9] K. Kaminski, Migration of soluble salts in plastered masonry wall of building subjected to long moisture build-up, Materialy Budowlane 3 (2011) 33–34 (in Polish).
  • [10] Z. Suchorab, B. Deneka, G. Lagod, H. Sobczuk, Possibility of measuring salinity of construction materials by TDR method, Proceedings of EcOpole 3 (1) (2009) 199–205 (in Polish).
  • [11] R.M. Espinosa, L. Franke, G. Deckelmann, Phase changes of salts in porous materials: Crystallization, hydration and deliquescence, Construction and Building Materials 22 (2008) 1758–1773.
  • [12] E. Franzoni, F. Sandrolini, S. Bandini, An experimental fixture for continuous monitoring of electrical effects in moist masonry walls, Construction and Building Materials 25 (2011) 2023–2029.
  • [13] C. Gentillini, E. Franzoni, S. Bandini, L. Nobile, Effect of salt crystallisation on the shear behaviour of masonry walls: an experimental study, Construction and Building Materials 37 (2012) 181–189.
  • [14] M. Solymez, On the effective thermal conductivity of building bricks, Building and Environment 34 (1999) 1–5.
  • [15] A. Sliwinska, H. Garbalinska, Negative impact of moisture build-up in space dividers on their thermal performance, in: Proceedings of All-Poland Conference on Technical and Legal Problems of Building Maintenance, Warsaw, 2013, 159–163 (in Polish).
  • [16] H.R. Trechsel, M.T. Bomberg (Eds.), Moisture Control in Buildings: The Key Factor in Mold Prevention, 2nd ed., ASTM International, West Conshohocken, 2009.
  • [17] B. Gutarowska, M. Piotrowska, Methods of mycological analysis in buildings, Building and Environment 42 (2007) 1843–1850.
  • [18] T. Blaszczynski, B. Zgola, K. Kukurenda, C. Bazela, Durability and repairs efficiency in case of more than hundred years historical building, in: M. Kaminski, J. Jasiczak, W. Buczkowski, T. Blaszczynski (Eds.), Durability and Construction Repairs Efficiency, DWE, Wroclaw, 2007.
  • [19] M. Rokiel, Waterproof membranes in construction, Guide, Dom Wydawniczy Medium, Warsaw, 2006 (in Polish).
  • [20] J. Adamowski, J. Hola, Z. Matkowski, Methods of drying space dividers, Materialy Budowlane (1) (2007) 110–114 (in Polish).
  • [21] F. Sandrolini, E. Franzoni, An operative protocol for reliable measurements of moisture in porous materials of ancient buildings, Building and Environment 41 (2006) 1372–1380.
  • [22] H.R. Trechsel, Moisture Control in Buildings, ASTM International, Philadelphia, 1994.
  • [23] J. Hola, J. Sikora, S. Filipowicz, Z. Matkowski, K. Nita, K. Schabowicz, et al., New tomographic method of brickwork damp identification, Wroclaw University of Technology Publishing House, Wroclaw, 2010.
  • [24] J. Jasienko, Z. Matkowski, Salinity and dampness of brickwork in historic buildings – diagnostics, test methods, rehabilitation techniques, Wiadomosci konserwatorskie 14 (2003) 43–48 (in Polish).
  • [25] J. Karys, K. Zwierzyniecki, Specification of measurement of moisture content in space dividers by electric methods, Materialy Budowlane 10 (2006) 60–61 (in Polish).
  • [26] Z. Suchorab, Field measurements of moisture content in masonry by means of TDR surface probes, Materialy Budowlane 4 (2011) 22–24 (in Polish).
  • [27] B. Jannsen, A.F. Jacob, Microwave moisture measurements on a test-building, in: Proc. XVI IMEKO World Congress, Wien, 2000, 239–244.
  • [28] W. Leschnik, U. Schlemm, Measurement of the moisture and salt content of building materials, in: Proceedings of 5th Int. Symposium on Non-Destructive Testing in Civil Engineering, Tokyo, 2000, 209–218.
  • [29] H. Kaariainen, M. Rudolph, D. Schaurich, K. Tulla, H. Wiggenhauser, Moisture measurements in building materials with microwaves, in: Proceedings of 5th Int. Symposium on Non-Destructive Testing in Civil Engineering, Tokyo, 2000, 199–207.
  • [30] TROTEC T2000, Praxishandbuch Version 2.0.
  • [31] J. Hola, Z. Matkowski, K. Schabowicz, J. Sikora, K. Nita, S. Wojtowicz, Identification of moisture content in brick walls by means of impedance tomography, COMPEL – The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 31 (6) (2012) 1774–1792.
  • [32] Z. Suchorab, H. Sobczuk, Z. Pavlik, R. Cerny, R. Plagge, Nominative moisture measurement of building materials using TDR method, in: 8th International Conference on Electromagnetic Wave Interaction with Water and Moist Substances, Espoo, (2009) 147–155.
  • [33] L. Brunarski, L. Runkiewicz, Basis and examples of use of non-destructive methods in testing of concrete structures, Scientific Papers of Building Research Institute, Warsaw, 1983 (in Polish).
  • [34] A. Pala, Comparative analysis of non-destructive brick wall dampness assessments based on hypothetical dependence and correlational dependence, E-Journal of Non-destructive Testing & Ultrasonics 6 (2013) 181–188.
  • [35] H. Schmitz, J. Böhning, E. Krings, Feuchtemessung mit Hilfe elektronischer baustoffeuchtemeßgeräte, Schriftenreihe des Landesinstituts für Bauwesen und angewandte Bauschadensforschung, Aachen, 1987.
  • [36] A. Pala, Tests of moisture content in saline burnt clay brick by non-destructive dielectric method, Materialy Budowlane 6 (2013) 60–62 (in Polish).
  • [37] A. Pala, Investigations of moisture content in saline lime mortar by non-destructive dielectric method, in: 43rd International Conference and NDT Exhibition, Defektoskopie, Olomouc, 2013, 103–110.
  • [38] A. Pala, The influence of salinity on ceramic brick moisture content test results obtained using the non-destructive dielectric method, in: Proc. of International Interdisciplinary PhD Workshop 2013, Brno, 2013, 156–160.
  • [39] A. Pala, J. Hola, Tests of moisture content in saline burnt clay brick by non-destructive resistance method, Materialy Budowlane 7 (2013) 85–87 (in Polish).
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-51f8774b-6970-4bab-b326-13dbe0a1de4c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.