Correlation between shape factor and mechanical properties of graphitic cast irons

• Autorzy: Vasko A. , Vasko M.

Warianty tytułu

EN

The evaluation of shape factor (circularity) is a subject of interest in many fields of applications such as medicine and industrial processes. The shape factor plays an important role in materials science as a way to understand the relationship between microstructure and mechanical properties of technical materials. The paper deals with measurement of shape factor of graphitic particles with the aim to understand the influence of microstructure (especially shape of graphite) on mechanical properties of graphitic cast irons.

• Języki publikacji: EN

Słowa kluczowe

EN

shape factor; cast iron; graphite; microstructure; mechanical properties

PL

współczynnik kształtu; żeliwo; grafit; mikrostruktury materiałów; właściwości mechaniczne

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2016
• Tom: Vol. 11, No. 2
• Strony: 11--14
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Vasko A.

• University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovakia, phone: [phone]

autor

Vasko M.

• University of Žilina, Faculty of Mechanical Engineering, Department of Applied Mechanics, Univerzitná 8215/1, 010 26 Žilina, Slovakia, phone: [phone]

Bibliografia

• 1. Belan J. 2014. Quantitative evaluation of alitize coating on ŽS6K Ni-base superalloy. „Materials Science Forum”. Vol. 782, p. 578-583.
• 2. Borkowski S., Ulewicz R. 2009. Laboratorium z materiałoznastwa dla inżynierów. CWA Regina Poloniae. Częstochowa.
• 3. Gomes O.F.M., Paciornik S. 2005. Automatic Classification of Graphite in Cast Iron. „Microscopy and Microanalysis”. Vol. 11, No. 4, p. 363-371.
• 4. Herrera-Navarro A.M., Hernández H.J., Peregrina-Barreto, H. 2013. A New Measure of Circularity Based on Distribution of the Radius. „Computación y Sistemas”. Vol. 17, No. 4, p. 515-526.
• 5. Hurtalová L., Tillová E., Chalupová M. 2014. The study of iron intermetallic phases morphology with applying deep etching in secondary Al-Si alloys. „Materials Science Forum”. Vol. 782, p. 359-364.
• 6. Hurtalová L., Tillová E., Chalupová M., Belan J. 2015. Morphology of intermetallic phases in Al-Si cast alloys and their fracture behaviour. „Production Engineering Archives”. Vol. 6, No. 1, p. 2-5.
• 7. Konečná R., Fintová S. 2014. Methods of structure study. EDIS. Žilina. (in Slovak).
• 8. Kuśmierczak S., Svobodová J. 2014. Macroscopic quality evaluation of lacquered steel sheets. „Production Engineering Archives”. Vol. 2, No. 1, p. 23-26.
• 9. Li J., Lu L., Lai M.O. 2000. Quantitative analysis of the irregularity of graphite nodules in cast iron. „Materials Characterization”. Vol. 45, No. 2, p. 83-88.
• 10. Skočovský P., Matejka M. 1994. Microstructure of cast irons. Metallographic handbook. Fompex. Trenčín. (in Slovak).
• 11. Skočovský P., Podrábský T. 2005. Graphitic cast irons. EDIS. Žilina. (in Slovak).
• 12. Skočovský P., Vaško A. 2007. Quantitative evaluation of structure of cast irons. EDIS. Žilina. (in Slovak).
• 13. Ulewicz R., Nový F., Mazur M., Szataniak P. 2014. Fatigue properties of the HSLA steel in high and ultra-high cycle region. „Production Engineering Archives”. Vol. 4, No. 3, p. 18-21.
• 14. Vaško A. 2010. Methods of quality control of graphitic cast irons. In: Toyotarity. Structure of control elements importance. (edited by Borkowski S., Szota M.), Dnipropetrovsk, Ukraine, p. 80-87.
• 15. Vaško A., Skočovský P. 2014. Properties and using of metal materials. EDIS. Žilina. (in Slovak).

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.