Analysis of the temperature effect on the stresses and deformations of GRP panels during the grouting process when using relining technology

• Autorzy: Fyall Zuzanna

Identyfikatory

DOI

10.2478/sgem-2021-0032

• Języki publikacji: EN

Abstrakty

EN

The paper presents a numerical analysis of the behaviour of egg-shaped glass-reinforced plastic (GRP) panels during the grouting process when using short relining technology. The analysis was carried out for panels subjected to temperature changes. The temperature increase was caused by the heat of hydration of the grout. It was shown that temperature had a significant effect on the stresses occurring in the panels’ walls and also on their deformations. The analysis involved grout being added in a single stage and then in two stages for comparison. The distribution of stresses and deformations were examined for panels with different wall thicknesses that ranged from 12 to 20 mm. Extensive knowledge about the grouting process and the effect of temperature on the behaviour of GRP panels during the assembly stage when using short relining technology could make this non-disruptive technology more competitive with regards to the time of its implementation and its costs when compared to traditional methods.

Słowa kluczowe

EN

relining technology; GRP; grouting process; temperature

• Wydawca: De Gruyter
• Czasopismo: Studia Geotechnica et Mechanica
• Rocznik: 2021
• Tom: Vol. 43, nr s1
• Strony: 521--531
• Opis fizyczny: Bibliogr. 29 poz., rys., tab.

Twórcy

autor

Fyall Zuzanna

• Wroclaw University of Science and Technology: Politechnika Wroclawska, Wroclaw, Poland

Bibliografia

• [1] Zlokovitz R., Juran I., Trenchless Technology Solutions for Professional Training Sessions, The Urban Utility Center, 08/2005
• [2] Grosel J., Wysocki L., The dimensioning of pipes in short relining technology (in Polish), Instal 3/2008, Poland,
• [3] Fyall Z. A., Wysocka A., Risk of GRP panel failure during installation in sewers when using relining technology, the second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM) and the sixth International Symposium on Undertainty Modeling and Analysis (ISUMA), July 13–16, 2014, Liverpool, United Kingdom, 2014, pp. 1254–1263,
• [4] Fyall Z., Wysocki L., About failures during the renovation of sewage conduits (in Polish), Inżynieria i Budownictwo, 10/2015, p. 529
• [5] DWA-A 143–2, Sanierung von Entwässerungsszstemen außerhalb von Gebäuden, Teil 2: Statische Berechnung zur Sanierung von Abwasserleitungen und -kanälen mit Lining- und Montageverfahren, Germany
• [6] Alawaji HA, Temperature effects on polyethylene (HDPE) and fiberglass (GRP) pipes, http://www.ksu.edu.sa/sites/Colleges/Engineering/final Report/CE-23-26-27.pdf, available in February 20, 2008,
• [7] ACI Committee 116, Cement and Concrete Terminology, American Concrete Institute, Detroit, 1967.
• [8] Rosquoët F., Alexis A., Khelidj A., Phelipot A., Experimental study of cement grout: rheological behavior and sedimentation, Cem. Concr. Res., 33 (2003), pp. 713–722
• [9] Minh H., Mutsuyoshi H., Niitani K., Influence of grouting condition on crack and load-carrying capacity of post-tensioned concrete beam due to chloride-induced corrosion, Constr. Build. Mater., 21 (2007), pp. 1568–1575
• [10] Naaman A.E., Reinforced concrete in Encyclopedia of materials: Science and technology (second edition), KHJBWCCFIJKM Veyssière, Elsevier, Oxford (2001), pp. 8095–8109
• [11] Wang L., Zhang X., Zhang J., Ma Y., Xiang Y., Liu Y., Effect of insufficient grouting and strand corrosion on flexural behavior of pc beams, Constr. Build. Mater., 53 (2014), pp. 213–224
• [12] Hoang Q. G., Kaci A., Kadri E., Gallias J., A new methodology for characterizing segregation of cement grouts during rheological tests, Construction and Building Materials Volume 96, 15 October 2015, pp. 119–126
• [13] http://www.culvert-rehab.com
• [14] http://northeasttrenchless.org/pdf/annular-space-grouting.pdf
• [15] Johnson R.C., Curt C., Dunham G.F., Well Grouting and Casing Temperature Increases, Groundwater, Vol.18, pp. 7–13, January 1980
• [16] Molz F., Curt C., Grout-Induced Temperature Rise Surrounding Wells, Groundwater No3, Vol.17, 1979
• [17] Mehta. P.K., Ravina. D. (1986). Properties of fresh concrete containing large amounts of fly ash. Cement and Concrete Research, 16 (2), 227–238.
• [18] Metha P.K., Monteiro P.J.M., Concrete, Microstructure, Properties and Materials. McGraw-Hill Company, Inc., 2006,
• [19] Portland Cement, Concrete and Heat of Hydration, Concrete Technology Today, Portland Cement Association, Vol.18/No 2, 07/1997
• [20] Syachrania S., Jeongb H. S., Raic V., Chaed M. J., Iseleye T., A risk management approach to safety assessment of trenchless technologies for culvert rehabilitation, Tunnelling and Underground Space Technology, Vol. 25, 12/2010, pp. 681–688
• [21] Janson L.E., Plastic Pipes for Water Supply and Sewage Disposal, 1995
• [22] Thomas N. K., George S. P., John S. M., George S. P. guided by Asst. Prof. M.S. S. Stress, Analysis of Underground GRP Pipe Subjected to Internal and External Loading Conditions, International Journal of Advanced Mechanical Engineering, Vol. 4, No 4/2014, pp. 435–440
• [23] Zhang X., Li Z., Zhu S., Coupled-Field, Analysis of FRP Pipe under Thermal and Internal Pressure Loads, 2010 International Symposium on Computational Intelligence & Design (ISCID); 2010, pp158–161,
• [24] Bank L.C., Composites for Construction: Structural Design with FRP Materials, 9/2006
• [25] Shokry K.M., Effect of Temperature on Mechanical Properties of Glass Reinforced Plastic GRP, World Applied Sciences Journal 31 (7): pp 1341–1344, 2014
• [26] Guidelines for the assembly of non-circular conduits – Namron, http://www.namron.pl/
• [27] Technical and information materials of the Preuss Pipe Rehabilitation Polska Sp. z o.o. Company, http://www.preuss.com.pl
• [28] Technical and information materials of the Diringer & Scheidel Polska sp. z o.o Company, http://www.dus.pl
• [29] Falter B., Buckling Experiments on egg-shaped PE Linings, Mediterranean NO DIG 2007 - XXVth International Conference & Exhibition - Roma, 10/12 Settembre 2007