Design of hollow section overlap joints with reinforcing rib plate. Joint resistance

• Autorzy: Bródka J.

Identyfikatory

DOI

10.1515/ace-2015-0001

• Języki publikacji: EN

Abstrakty

EN

These joints are used when the designer and contractor anticipate difficulties during the construction of overlap joints. They were not included in the PN EN 1993-1-8 in full scale. Resistance assessment of such joints is presented in accordance with standard rules. The results were compared with the experimental studies carried out at the “Mostostal” Centre; while the former research activities and the legitimacy of the proposed method of assessing the resistance of these joints was confirmed. This is an example of an overlap joint calculation.

Słowa kluczowe

EN

steel structure; hollow section; reinforcing rib; resistance; assessment; overlap joint

PL

konstrukcja stalowa; kształtownik zamknięty; żebro wzmacniające; odporność; ocena; połączenie nakładkowe

• Wydawca: Komitet Inżynierii Lądowej i Wodnej PAN ; Politechnika Warszawska, Wydział Inżynierii Lądowej
• Czasopismo: Archives of Civil Engineering
• Rocznik: 2015
• Tom: Vol. 61, nr 1
• Strony: 3--16
• Opis fizyczny: Bibliogr. 12 poz., il., tab.

Twórcy

autor

Bródka J.

Bibliografia

• 1 Bródka J., Broniewicz M.: Steel structures in hollow sections. Arkady. Warszawa 2001 (in Polish).
• 2 Bródka J., Kozłowski A., Ligocki I., Łaguna J., Ślęczka L.: Design and calculation of joints in steel structures. Vol. 1. Second Edition. PWT. Rzeszów 2013 (in Polish).
• 3 Packer J. A., Henderson J. E.: Hollow Structural Section Connections and Trusses – A Design Guide. Second Edition. Canadian Institute of Steel Construction. Toronto 1997.
• 4 Packer J. A., Wardenier J., Zhao X.-L., van der Vegte G. J., Kurobane Y.: Design guide for rectangular hollow section (RHS) joints under predominantly static loading. LSS Verlag. CIDECT. 2009.
• 5 PN-EN 1993-1-8: 2008 Eurocode 3: Design of steel structures – Part: 1 –8 Design of joints.
• 6 Puthli R., Ummenhofer Th., Wardenier J., Petermann I.: Anschlüsse mit Hohlprofilen nach DIN EN 1993-1-8. Hintergrund, Kommentare, Beispiele. In „Stahlbau – Kalender 2011“. Herausgegeben von Ulrike Kuhlmann. Ernst und Sohn GmbH. Berlin 2011.
• 7 Static design procedure for welded hollow section joints. Recommendations. 3rd Edition. International Institute of Welding. Commission XV. IIW. Doc. XV-1129-09.
• 8 Wardenier J., Kurobane Y., Packer J. A., van der Vegte G. J., Zhao X.-L.: Design guide for circular hollow section (CHS) joints under predominantly static loading. LSS Verlag. CIDECT. 2008.
• 9 Wardenier J., Packer J. A., Zhao X.-L., van der Vegte G. J.: Hollow sections in structural applications. Bouven met Staal. Zoetemer 2010.
• 10 Życiński J.: Ultimate resistance of the K-type joint made of rectangular hollow sections. PhD Thesis, Warsaw University of Technology. 1982 (in Polish).
• 11 Życiński J., Czechowski A., Bródka J.: Ultimate resistance of the K-type joint made of rectangular hollow sections. – The Archives of Civil Engineering. 1986, No 3 (in Polish).
• 12 The Design-Research Centre of Metal Structures „Mostostal”. Research program coordinated by the Association "Mostostal", financed by public funds. The program of experimental research and development of the results of research conducted under the direction of J. Bródka. 1980-1981 (reports not published).